mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
4070e2a64c
This target adds support for the StarFive JH7100 and JH7110 SoCs, based on 6.1, as well as a couple boards equipped with these. Specifications: SoCs: JH7100: - StarFive JH7100 dual-core RISC-V (U74, RC64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache JH7110: - StarFive JH7110 quad-core RISC-V (U74, RV64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache Boards: VisionFive1: - JH7100 @ 1GHz - Memory: 8Gb LPDDR4 - 4x USB3.0 - 1x GBit ethernet - AMPak 6236 wifi / bluetooth - audio - powered via USB-C VisionFive2: - JH7110 @ 1.5GHz - Memory: 2/4/8Gb DDR4 - 2x Gbit ethernet - 2x USB3.0 / 2x USB2.0 - eMMC / SDIO - various multimedia input/outputs (MIPI CSI, HDMI, audio) - M.2 key M slot - PoE support - powered via USB-C Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
216 lines
7.3 KiB
Diff
216 lines
7.3 KiB
Diff
From dbee38aac9811a25e3e3204f813048bf64155248 Mon Sep 17 00:00:00 2001
|
|
From: Emil Renner Berthing <kernel@esmil.dk>
|
|
Date: Sat, 1 Apr 2023 19:19:22 +0800
|
|
Subject: [PATCH 010/122] reset: starfive: Extract the common JH71X0 reset code
|
|
|
|
Extract the common JH71X0 reset code for reusing them to
|
|
support JH7110 SoC.
|
|
|
|
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
|
|
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
|
|
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
|
|
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
---
|
|
.../reset/starfive/reset-starfive-jh7100.c | 49 ++++++++++++
|
|
.../reset/starfive/reset-starfive-jh71x0.c | 76 ++++++-------------
|
|
.../reset/starfive/reset-starfive-jh71x0.h | 5 +-
|
|
3 files changed, 76 insertions(+), 54 deletions(-)
|
|
|
|
--- a/drivers/reset/starfive/reset-starfive-jh7100.c
|
|
+++ b/drivers/reset/starfive/reset-starfive-jh7100.c
|
|
@@ -10,6 +10,55 @@
|
|
|
|
#include "reset-starfive-jh71x0.h"
|
|
|
|
+#include <dt-bindings/reset/starfive-jh7100.h>
|
|
+
|
|
+/* register offsets */
|
|
+#define JH7100_RESET_ASSERT0 0x00
|
|
+#define JH7100_RESET_ASSERT1 0x04
|
|
+#define JH7100_RESET_ASSERT2 0x08
|
|
+#define JH7100_RESET_ASSERT3 0x0c
|
|
+#define JH7100_RESET_STATUS0 0x10
|
|
+#define JH7100_RESET_STATUS1 0x14
|
|
+#define JH7100_RESET_STATUS2 0x18
|
|
+#define JH7100_RESET_STATUS3 0x1c
|
|
+
|
|
+/*
|
|
+ * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
|
|
+ * line 32m + n, and writing a 0 deasserts the same line.
|
|
+ * Most reset lines have their status inverted so a 0 bit in the STATUS
|
|
+ * register means the line is asserted and a 1 means it's deasserted. A few
|
|
+ * lines don't though, so store the expected value of the status registers when
|
|
+ * all lines are asserted.
|
|
+ */
|
|
+static const u64 jh7100_reset_asserted[2] = {
|
|
+ /* STATUS0 */
|
|
+ BIT_ULL_MASK(JH7100_RST_U74) |
|
|
+ BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
|
|
+ BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
|
|
+ /* STATUS1 */
|
|
+ BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
|
|
+ BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
|
|
+ /* STATUS2 */
|
|
+ BIT_ULL_MASK(JH7100_RST_E24) |
|
|
+ /* STATUS3 */
|
|
+ 0,
|
|
+};
|
|
+
|
|
+static int __init jh7100_reset_probe(struct platform_device *pdev)
|
|
+{
|
|
+ void __iomem *base = devm_platform_ioremap_resource(pdev, 0);
|
|
+
|
|
+ if (IS_ERR(base))
|
|
+ return PTR_ERR(base);
|
|
+
|
|
+ return reset_starfive_jh7100_register(&pdev->dev, pdev->dev.of_node,
|
|
+ base + JH7100_RESET_ASSERT0,
|
|
+ base + JH7100_RESET_STATUS0,
|
|
+ jh7100_reset_asserted,
|
|
+ JH7100_RSTN_END,
|
|
+ THIS_MODULE);
|
|
+}
|
|
+
|
|
static const struct of_device_id jh7100_reset_dt_ids[] = {
|
|
{ .compatible = "starfive,jh7100-reset" },
|
|
{ /* sentinel */ }
|
|
--- a/drivers/reset/starfive/reset-starfive-jh71x0.c
|
|
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.c
|
|
@@ -10,51 +10,18 @@
|
|
#include <linux/io.h>
|
|
#include <linux/io-64-nonatomic-lo-hi.h>
|
|
#include <linux/iopoll.h>
|
|
-#include <linux/platform_device.h>
|
|
#include <linux/reset-controller.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include "reset-starfive-jh71x0.h"
|
|
|
|
-#include <dt-bindings/reset/starfive-jh7100.h>
|
|
-
|
|
-/* register offsets */
|
|
-#define JH7100_RESET_ASSERT0 0x00
|
|
-#define JH7100_RESET_ASSERT1 0x04
|
|
-#define JH7100_RESET_ASSERT2 0x08
|
|
-#define JH7100_RESET_ASSERT3 0x0c
|
|
-#define JH7100_RESET_STATUS0 0x10
|
|
-#define JH7100_RESET_STATUS1 0x14
|
|
-#define JH7100_RESET_STATUS2 0x18
|
|
-#define JH7100_RESET_STATUS3 0x1c
|
|
-
|
|
-/*
|
|
- * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
|
|
- * line 32m + n, and writing a 0 deasserts the same line.
|
|
- * Most reset lines have their status inverted so a 0 bit in the STATUS
|
|
- * register means the line is asserted and a 1 means it's deasserted. A few
|
|
- * lines don't though, so store the expected value of the status registers when
|
|
- * all lines are asserted.
|
|
- */
|
|
-static const u64 jh7100_reset_asserted[2] = {
|
|
- /* STATUS0 */
|
|
- BIT_ULL_MASK(JH7100_RST_U74) |
|
|
- BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
|
|
- BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
|
|
- /* STATUS1 */
|
|
- BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
|
|
- BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
|
|
- /* STATUS2 */
|
|
- BIT_ULL_MASK(JH7100_RST_E24) |
|
|
- /* STATUS3 */
|
|
- 0,
|
|
-};
|
|
-
|
|
struct jh7100_reset {
|
|
struct reset_controller_dev rcdev;
|
|
/* protect registers against concurrent read-modify-write */
|
|
spinlock_t lock;
|
|
- void __iomem *base;
|
|
+ void __iomem *assert;
|
|
+ void __iomem *status;
|
|
+ const u64 *asserted;
|
|
};
|
|
|
|
static inline struct jh7100_reset *
|
|
@@ -69,9 +36,9 @@ static int jh7100_reset_update(struct re
|
|
struct jh7100_reset *data = jh7100_reset_from(rcdev);
|
|
unsigned long offset = BIT_ULL_WORD(id);
|
|
u64 mask = BIT_ULL_MASK(id);
|
|
- void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u64);
|
|
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
|
|
- u64 done = jh7100_reset_asserted[offset] & mask;
|
|
+ void __iomem *reg_assert = data->assert + offset * sizeof(u64);
|
|
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
|
|
+ u64 done = data->asserted ? data->asserted[offset] & mask : 0;
|
|
u64 value;
|
|
unsigned long flags;
|
|
int ret;
|
|
@@ -125,10 +92,10 @@ static int jh7100_reset_status(struct re
|
|
struct jh7100_reset *data = jh7100_reset_from(rcdev);
|
|
unsigned long offset = BIT_ULL_WORD(id);
|
|
u64 mask = BIT_ULL_MASK(id);
|
|
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
|
|
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
|
|
u64 value = readq(reg_status);
|
|
|
|
- return !((value ^ jh7100_reset_asserted[offset]) & mask);
|
|
+ return !((value ^ data->asserted[offset]) & mask);
|
|
}
|
|
|
|
static const struct reset_control_ops jh7100_reset_ops = {
|
|
@@ -138,25 +105,28 @@ static const struct reset_control_ops jh
|
|
.status = jh7100_reset_status,
|
|
};
|
|
|
|
-int jh7100_reset_probe(struct platform_device *pdev)
|
|
+int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
|
|
+ void __iomem *assert, void __iomem *status,
|
|
+ const u64 *asserted, unsigned int nr_resets,
|
|
+ struct module *owner)
|
|
{
|
|
struct jh7100_reset *data;
|
|
|
|
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
|
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
- data->base = devm_platform_ioremap_resource(pdev, 0);
|
|
- if (IS_ERR(data->base))
|
|
- return PTR_ERR(data->base);
|
|
-
|
|
data->rcdev.ops = &jh7100_reset_ops;
|
|
- data->rcdev.owner = THIS_MODULE;
|
|
- data->rcdev.nr_resets = JH7100_RSTN_END;
|
|
- data->rcdev.dev = &pdev->dev;
|
|
- data->rcdev.of_node = pdev->dev.of_node;
|
|
+ data->rcdev.owner = owner;
|
|
+ data->rcdev.nr_resets = nr_resets;
|
|
+ data->rcdev.dev = dev;
|
|
+ data->rcdev.of_node = of_node;
|
|
+
|
|
spin_lock_init(&data->lock);
|
|
+ data->assert = assert;
|
|
+ data->status = status;
|
|
+ data->asserted = asserted;
|
|
|
|
- return devm_reset_controller_register(&pdev->dev, &data->rcdev);
|
|
+ return devm_reset_controller_register(dev, &data->rcdev);
|
|
}
|
|
-EXPORT_SYMBOL_GPL(jh7100_reset_probe);
|
|
+EXPORT_SYMBOL_GPL(reset_starfive_jh7100_register);
|
|
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
|
|
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
|
|
@@ -6,6 +6,9 @@
|
|
#ifndef __RESET_STARFIVE_JH71X0_H
|
|
#define __RESET_STARFIVE_JH71X0_H
|
|
|
|
-int jh7100_reset_probe(struct platform_device *pdev);
|
|
+int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
|
|
+ void __iomem *assert, void __iomem *status,
|
|
+ const u64 *asserted, unsigned int nr_resets,
|
|
+ struct module *owner);
|
|
|
|
#endif /* __RESET_STARFIVE_JH71X0_H */
|