Mathias Kresin a7c6cf5182 ramips: TEW-692GR: fix switch and wireless ... The AR8327 initvals were not copied to the DTS during the switch from mach file to device tree and broke the switch on the device. The former used PORT6 related initvals were wrong and have been corrected. The phy mode setting for the switch was missing in the DTS as well. The wireless requires an eeprom to work. The dual band wireless chips have both bands enabled by default but only one band per chip is working. The stock firmware uses the following mac addresses: LAN: AA:BB:CC:DD:EE:E4 WAN: AA:BB:CC:DD:EE:E4 2.4GHz: AA:BB:CC:DD:EE:E4 5 GHz: AA:BB:CC:DD:EE:E8 Assuming the mac address range :E4 to :E8 is reserved for this device, the MAC addresses were reorder to have a unique MAC address for each interface: LAN: AA:BB:CC:DD:EE:E4 2.4GHz: AA:BB:CC:DD:EE:E4 WAN: AA:BB:CC:DD:EE:E5 5 GHz: AA:BB:CC:DD:EE:E8 Signed-off-by: Mathias Kresin <dev@kresin.me>		2016-08-20 11:45:45 +02:00
..
etc	ramips: TEW-692GR: fix switch and wireless	2016-08-20 11:45:45 +02:00
lib	ramips: Add support for Thunder Timecloud	2016-08-10 03:04:08 +02:00
sbin	ramips: add a script to fix up the broken mac address on the witi board	2016-01-01 18:57:39 +00:00