openwrt/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
Tomasz Maciej Nowak 92b3efec54 mvebu: sort patches
Sort patches according to target/linux/generic/PATCHES. Additionally:
- replace hashes in backported patches with the ones from main Linux tree
- add descriptions to some patches

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
[remove 004-add_sata_disk_activity_trigger.patch separately]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-25 13:57:50 +01:00

58 lines
2.0 KiB
Diff

From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
Date: Thu, 30 Apr 2020 10:06:24 +0200
Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle
property
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Move the comphy handle property of the PCIe node from board specific
device tree files (EspressoBin and Turris Mox) to the generic
armada-37xx.dtsi.
This is correct since this is the only possible PCIe PHY configuration
on Armada 37xx, so when PCIe is enabled on any board, this handle is
correct.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 -
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
3 files changed, 1 insertion(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -56,7 +56,6 @@
/* J9 */
&pcie0 {
status = "okay";
- phys = <&comphy1 0>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -126,7 +126,6 @@
status = "okay";
max-link-speed = <2>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- phys = <&comphy1 0>;
/* enabled by U-Boot if PCIe module is present */
status = "disabled";
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -493,6 +493,7 @@
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
+ phys = <&comphy1 0>;
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;