openwrt/target/linux/bcm27xx/patches-5.15/950-0500-net-phy-lan87xx-Allow-more-time-for-link-detect.patch
Álvaro Fernández Rojas 20ea6adbf1 bcm27xx: add support for linux v5.15
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2022-05-17 15:11:22 +02:00

39 lines
1.3 KiB
Diff

From eb860f6a2dee9a4c94a7101c1d43194b95fdbc8d Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 22 Sep 2021 15:38:13 +0100
Subject: [PATCH] net: phy: lan87xx: Allow more time for link detect
With EDPWRDOWN set in idle, it must be cleared before checking for
ENERGYON going high, indicating that a link is being established.
The existing code allows 640ms for ENERGYON to go high, but on
Raspberry Pis that appears not to be enough, causing link detection
to fail.
Increase the polling timeout to 1500ms - with a polling interval of
10ms it shouldn't cause unnecessary delays.
See: https://github.com/raspberrypi/linux/issues/4393
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
drivers/net/phy/smsc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -228,12 +228,12 @@ static int lan87xx_read_status(struct ph
if (rc < 0)
return rc;
- /* Wait max 640 ms to detect energy and the timeout is not
+ /* Wait max 1500 ms to detect energy and the timeout is not
* an actual error.
*/
read_poll_timeout(phy_read, rc,
rc & MII_LAN83C185_ENERGYON || rc < 0,
- 10000, 640000, true, phydev,
+ 10000, 1500000, true, phydev,
MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;