openwrt/target/linux/ath79/dts/ar9341_tplink_tl-wr941nd-v5.dts
Will Moss e22ca21daa ath79: add support for TP-Link TL-WR941ND v5
Specifications:
- SoC: ar9341
- RAM: 32M
- Flash: 4M
- Ethernet: 5x FE ports
- WiFi: ar9341-wmac

Flash instruction:
Upload generated factory firmware on vendor's web interface.

This device is very similar to the TL-WR841N v8, only two LED GPIOs are
different.
Buttons configuration is similar to TL-WR842ND v2 but both buttons are
active low.

Signed-off-by: Will Moss <willormos@gmail.com>
2022-09-11 22:00:22 +02:00

104 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9341_tplink.dtsi"
/ {
model = "TP-Link TL-WR941ND v5";
compatible = "tplink,tl-wr941nd-v5", "qca,ar9341";
aliases {
label-mac-device = &wmac;
};
keys {
compatible = "gpio-keys";
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "Reset/WPS";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&leds {
lan3 {
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
lan4 {
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth0 { // WAN port, initialized last as eth1
nvmem-cells = <&macaddr_uboot_1fc00>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
&eth1 { // LAN ports, initialized first as eth0
nvmem-cells = <&macaddr_uboot_1fc00>;
nvmem-cell-names = "mac-address";
};
&wmac {
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_uboot_1fc00>;
nvmem-cell-names = "mac-address";
};
&uboot {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_uboot_1fc00: macaddr@1fc00 {
reg = <0x1fc00 0x6>;
};
};