INAGAKI Hiroshi a79f55e7e0 ramips: add support for ELECOM WRC-1750GS/GSV ... ELECOM WRC-1750GS is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. WRC-1750GSV has the same hardware with WRC-1750GS. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-1750GS (or WRC-1750GSV) normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button for WRC-1750GS : wrc-1750gs-squashfs-factory.bin for WRC-1750GSV: wrc-1750gsv-squashfs-factory.bin 4. Wait ~120 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2020-07-16 13:39:44 +02:00
..
imagebuilder	imagebuilder: Remove json_info_files/ before build	2020-06-11 11:12:56 +01:00
linux	ramips: add support for ELECOM WRC-1750GS/GSV	2020-07-16 13:39:44 +02:00
sdk	build: improve ccache support	2020-07-11 15:19:53 +02:00
toolchain	build: improve ccache support	2020-07-11 15:19:53 +02:00
Config.in	build: define RTC_SUPPORT as a bool	2020-04-09 12:51:10 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00