mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
010aec0619
The patch set for Buffalo WLAE-AG300N initial support. There is another patch for wireless led support that is posted separately. Note on serial console: This unit has buffalo standard 4 pin console, but the unit may not power on if some console apparatus is connected. This is probably due to some electronic interaction between the unit's electronic power switch circuit and the serial console apparatus. If this happens, it is required to power on the unit without the console, then quickly (re-)attach it. [juhosg: fix coding style] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32931
115 lines
2.6 KiB
C
115 lines
2.6 KiB
C
/*
|
|
* Buffalo WLAE-AG300N board support
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
|
|
#include "dev-eth.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "machtypes.h"
|
|
|
|
#define WLAEAG300N_MAC_OFFSET 0x20c
|
|
#define WLAEAG300N_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
|
|
|
|
|
|
static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
|
|
/*
|
|
* Note: Writing 1 into GPIO 13 will power down the device.
|
|
*/
|
|
{
|
|
.name = "buffalo:green:wireless",
|
|
.gpio = 14,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "buffalo:red:wireless",
|
|
.gpio = 15,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "buffalo:green:status",
|
|
.gpio = 16,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "buffalo:red:status",
|
|
.gpio = 17,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
|
|
static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "function",
|
|
.type = EV_KEY,
|
|
.code = KEY_MODE,
|
|
.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = 0,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = 1,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "power",
|
|
.type = EV_KEY,
|
|
.code = KEY_POWER,
|
|
.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = 11,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "aoss",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = 12,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static void __init wlaeag300n_setup(void)
|
|
{
|
|
u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
|
|
|
|
ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
|
|
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.speed = SPEED_1000;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth1_data.phy_mask = BIT(4);
|
|
|
|
ath79_register_eth(0);
|
|
ath79_register_eth(1);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
|
|
wlaeag300n_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(wlaeag300n_gpio_keys),
|
|
wlaeag300n_gpio_keys);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ap91_pci_init(eeprom1, mac1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
|
|
"Buffalo WLAE-AG300N", wlaeag300n_setup);
|