mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-02 03:56:49 +00:00
788a0cf15c
Hardware
--------
SoC: Freescale P1010
RAM: 512MB
FLASH: 1 MB SPI-NOR
512 MB NAND
ETH: 3x Gigabite Ethernet (Atheros AR8033)
SERIAL: Cisco RJ-45 (115200 8N1)
RTC: Battery-Backed RTC (I2C)
Installation
------------
1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI
programmer. The SHA1 hash for the U-Boot password is currently
unknown.
A tool for patching U-Boot is available at
https://github.com/blocktrron/t10-uboot-patcher/
You can also patch the unknown password yourself. The SHA1 hash is
E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA
2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears.
The patched password is '1234' (without quotation marks)
3. Download the OpenWrt initramfs image. Copy it to a TFTP server
reachable at 10.0.1.13/24 and rename it to uImage.
4. Connect the TFTP server to ethernet port 0 of the Watchguard T10.
5. Download and boot the initramfs image by entering "tftpboot; bootm;"
in U-Boot.
6. After OpenWrt booted, create a UBI volume on the old data partition.
The "ubi" mtd partition should be mtd7, check this using
$ cat /proc/mtd
Create a UBI partition by executing
$ ubiformat /dev/mtd7 -y
7. Increase the loadable kernel-size of U-Boot by executing
$ fw_setenv SysAKernSize 800000
8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using
scp. Install the image by using sysupgrade:
$ sysupgrade -n <path-to-sysupgrade>
Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might
have to change the ethernet-port.
9. OpenWrt should now boot from the internal NAND. Enjoy.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
|
||
|---|---|---|
| .. | ||
| 001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch | ||
| 100-powerpc-85xx-tl-wdr4900-v1-support.patch | ||
| 101-powerpc-85xx-hiveap-330-support.patch | ||
| 102-powerpc-add-cmdline-override.patch | ||
| 103-powerpc-85xx-red-15w-rev1.patch | ||
| 104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch | ||
| 105-powerpc-85xx-panda-support.patch | ||
| 106-powerpc-85xx-ws-ap3710i-support.patch | ||
| 107-powerpc-85xx-add-ws-ap3825i-support.patch | ||
| 108-powerpc-85xx-firebox-t10-support.patch.patch | ||
| 900-powerpc-bootwrapper-disable-uImage-generation.patch | ||