openwrt/target/linux/lantiq/patches-4.9/0026-NET-multi-phy-support.patch
Hauke Mehrtens 863e79f8d5 lantiq: add support for kernel 4.9
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:44:13 +01:00

54 lines
1.6 KiB
Diff

From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:38:50 +0100
Subject: [PATCH 26/36] NET: multi phy support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/net/phy/phy.c | 9 ++++++---
include/linux/phy.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -996,7 +996,8 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
break;
}
@@ -1079,7 +1080,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
}
phydev->adjust_link(phydev->attached_dev);
@@ -1091,7 +1093,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
do_suspend = true;
}
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -373,6 +373,7 @@ struct phy_device {
bool is_pseudo_fixed_link;
bool has_fixups;
bool suspended;
+ bool no_auto_carrier_off;
enum phy_state state;