ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-12 07:53:07 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
a60721f2ed
openwrt/target/linux/ramips/image/mt7621.mk
Michał Kępień a60721f2ed mikrotik: switch to Yafut for building MikroTik NOR images 
The Yafut tool now has limited capabilities for working on filesystem
images stored in regular files.  This enables preparing Yaffs2 images
for devices with NOR flash using upstream Yaffs2 filesystem code instead
of the custom kernel2minor tool.

Since minimizing the size of the resulting filesystem image size is
important and upstream Yaffs2 code requires two allocator reserve blocks
to be available when writing a file to the filesystem, a trick is
employed while preparing an OpenWRT image: the blank filesystem image
that Yafut operates on initially contains two extra erase blocks that
are chopped off after the kernel file is written.  This is safe to do
because Yaffs2 has a true log structure and therefore only ever writes
sequentially (and the size of the kernel file is known beforehand).
While the two extra erase blocks are necessary for writes, Yaffs2 code
seems to be perfectly capable of reading back files from a "truncated"
filesystem that does not contain these extra erase blocks.

In terms of image size, this new approach is only marginally worse than
the current kernel2minor-based one: specifically, upstream Yaffs2 code
needs to write three object headers (each of which takes up an entire
data chunk) when the kernel file is written to the filesystem:

  - an object header for the kernel file when it is created,

  - an object header for the root directory when the kernel file is
    created,

  - an updated object header for the kernel file when the latter is
    fully written (so that its new size can be recorded).

kernel2minor only writes two of these headers, which is the absolute
minimum required for reading the file back.  This means that the
Yafut-based approach causes firmware images to be at most one erase
block (64 kB) larger than those created using kernel2minor, but only in
the very unfortunate scenario where the size of the kernel file is
really close to a multiple of the erase block size.

The rest of the calculations performed when the empty filesystem image
is first prepared stems from the Yaffs2 layout used by MikroTik NOR
devices: each 65,536-byte erase block contains 63 chunks, each of which
consists of 1024 bytes of data followed by 16-byte Yaffs tags without
ECC data; each such group of 63 chunks is then followed by 16 bytes of
padding, which translates to "-C 1040 -B 64k -E" in the Yafut
invocation.  Yaffs2 checkpoints and summaries are disabled (using
Yafut's -P and -S switches, respectively) as they are merely performance
optimizations that require extra storage space.  The -L and -M switches
are used to force little-endian or big-endian byte order (respectively)
in the resulting filesystem image, no matter what byte order the build
host uses.  The tr invocation is used to ensure that the filesystem
image is initialized with 0xFF bytes (which are an indicator of unused
space for Yaffs2 code).

Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
Link: https://github.com/openwrt/openwrt/pull/13453
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-06-05 17:03:24 +02:00

3241 lines
94 KiB
Makefile
Raw Blame History

#
# MT7621 Profiles
#
include ./common-sercomm.mk
include ./common-tp-link.mk
DEFAULT_SOC := mt7621
DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME DLINK_HWID
define Build/append-dlink-covr-metadata
echo -ne '{"supported_devices": "$(1)", "firmware": "' > $@metadata.tmp
$(MKHASH) md5 "$@" | head -c32 >> $@metadata.tmp
echo '"}' >> $@metadata.tmp
fwtool -I $@metadata.tmp $@
rm $@metadata.tmp
endef
define Build/arcadyan-trx
echo -ne "hsqs" > $@.hsqs
$(eval trx_magic=$(word 1,$(1)))
$(STAGING_DIR_HOST)/bin/otrx create $@.trx -M $(trx_magic) -f $@ \
-a 0x20000 -b 0x420000 -f $@.hsqs -a 1000
mv $@.trx $@
dd if=/dev/zero bs=1024 count=1 >> $@.tail
echo -ne "HDR0" | dd of=$@.tail bs=1 seek=$$((0x10c)) count=4 \
conv=notrunc 2>/dev/null
dd if=$@.tail >> $@ 2>/dev/null
rm $@.hsqs $@.tail
endef
define Build/gemtek-trailer
printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
endef
define Build/h3c-blank-header
dd if=/dev/zero of=$@.blank bs=160 count=1
cat $@ >> $@.blank
mv $@.blank $@
endef
define Build/haier-sim_wr1800k-factory
mkdir -p "$@.tmp"
mv "$@" "$@.tmp/UploadBrush-bin.img"
$(MKHASH) md5 "$@.tmp/UploadBrush-bin.img" | head -c32 > "$@.tmp/check_MD5.txt"
$(TAR) -czf "$@.tmp.tgz" -C "$@.tmp" UploadBrush-bin.img check_MD5.txt
$(STAGING_DIR_HOST)/bin/openssl aes-256-cbc -e -salt -in "$@.tmp.tgz" -out "$@" -k QiLunSmartWL
printf %32s $(DEVICE_MODEL) >> "$@"
rm -rf "$@.tmp" "$@.tmp.tgz"
endef
define Build/iodata-mstc-header
( \
data_size_crc="$$(dd if=$@ ibs=64 skip=1 2>/dev/null | gzip -c | \
tail -c 8 | od -An -tx8 --endian little | tr -d ' \n')"; \
echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
dd of=$@ bs=8 count=1 seek=7 conv=notrunc 2>/dev/null; \
)
dd if=/dev/zero of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null
( \
header_crc="$$(dd if=$@ bs=64 count=1 2>/dev/null | gzip -c | \
tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
echo -ne "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
dd of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null; \
)
endef
define Build/iodata-mstc-header2
$(eval model=$(word 1,$(1)))
$(eval model_id=$(word 2,$(1)))
( \
fw_len_crc=$$(gzip -c $@ | tail -c 8 | \
od -An -tx8 --endian little); \
printf "\x03\x1d\x61\x29\x07$(model)" | \
dd bs=21 count=1 conv=sync 2>/dev/null; \
printf "0.00.000" | dd bs=16 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $(REVISION) | cut -d- -f1 | head -c8)" | \
dd bs=9 count=1 conv=sync 2>/dev/null; \
printf "$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)" | \
dd bs=33 count=1 conv=sync 2>/dev/null; \
date -d "@$(SOURCE_DATE_EPOCH)" "+%F" | tr -d "\n" | \
dd bs=15 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $(model_id) | sed 's/../\\x&/g')" | \
dd bs=8 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $$fw_len_crc | sed 's/../\\x&/g')" | \
dd bs=14 count=1 conv=sync 2>/dev/null; \
cat $@; \
) > $@.new
( \
header_crc="$$(head -c116 $@.new | gzip -c | tail -c8 | \
od -An -tx4 -N4 --endian little)"; \
printf "$$(echo $$header_crc | sed 's/../\\x&/g')"; \
) | dd of=$@.new bs=4 oflag=seek_bytes seek=110 conv=notrunc
mv $@.new $@
endef
define Build/znet-header
$(eval version=$(word 1,$(1)))
$(eval magic=$(if $(word 2,$(1)),$(word 2,$(1)),ZNET))
$(eval hdrlen=$(if $(word 3,$(1)),$(word 3,$(1)),0x30))
( \
data_size_crc="$$(dd if=$@ 2>/dev/null | gzip -c | \
tail -c 8 | od -An -N4 -tx4 --endian big | tr -d ' \n')"; \
payload_len="$$(dd if=$@ bs=4 count=1 skip=1 2>/dev/null | od -An -tdI --endian big | tr -d ' \n')"; \
payload_size_crc="$$(dd if=$@ ibs=1 count=$$payload_len 2>/dev/null | gzip -c | \
tail -c 8 | od -An -N4 -tx4 --endian big | tr -d ' \n')"; \
echo -ne "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tac | tr -d '\n')" | \
dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$$(echo $$payload_size_crc | sed 's/../\\x&/g')" | \
dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "\x12\x34\x56\x78" | dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$(version)" | dd bs=28 count=1 conv=sync 2>/dev/null; \
dd if=/dev/zero bs=$$((0x40000 - $(hdrlen))) count=1 conv=sync 2>/dev/null | tr "\000" "\377"; \
cat $@; \
) > $@.new
mv $@.new $@
endef
define Build/belkin-header
$(eval magic=$(word 1,$(1)))
$(eval hw_ver=$(word 2,$(1)))
$(eval fw_ver=$(word 3,$(1)))
( \
type_fw_date=$$(printf "01%02x%02x%02x" \
$$(date -d "@$(SOURCE_DATE_EPOCH)" "+%-y %-m %-d")); \
hw_fw_ver=$$(printf "%02x%02x%02x%02x" \
$(hw_ver) $$(echo $(fw_ver) | cut -d. -f-3 | tr . ' ')); \
fw_len_crc=$$(gzip -c $@ | tail -c 8 | od -An -tx8 | tr -d ' \n'); \
fw_crc_len="$${fw_len_crc:8:8}$${fw_len_crc:0:8}"; \
\
printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $${type_fw_date}$${hw_fw_ver} | \
sed 's/../\\x&/g')"; \
printf "$$(echo $${fw_crc_len}$${fw_crc_len} | \
sed 's/../\\x&/g')"; \
printf "\x5c\x78\x00\x00"; \
cat $@; \
) > $@.new
mv $@.new $@
endef
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:7' > $(1).compat; \
$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
\
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
$(MKHASH) md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
\
echo "dummy" > $(1).rootfs; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
\
$(MKHASH) md5 $(1).rootfs > $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
\
echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
$(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
\
$(CP) $(1) $(BIN_DIR)/; \
else \
echo "WARNING: initramfs kernel image too big, cannot generate factory image (actual $$(stat -c%s $@); max $(KERNEL_SIZE))" >&2; \
fi
endef
define Build/zytrx-header
$(eval board=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(STAGING_DIR_HOST)/bin/zytrx -B '$(board)' -v '$(version)' -i $@ -o $@.new
mv $@.new $@
endef
define Build/zyxel-nwa-fit
$(TOPDIR)/scripts/mkits-zyxel-fit.sh \
$@.its $@ "6b e1 6f e1 ff ff ff ff ff ff"
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
define Device/nand
$(Device/dsa-migration)
BLOCKSIZE := 128k
KERNEL_SIZE := 4096k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/adslr_g7
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ADSLR
DEVICE_MODEL := G7
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += adslr_g7
define Device/afoundry_ew1200
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := AFOUNDRY
DEVICE_MODEL := EW1200
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-mt7603 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += ew1200
endef
TARGET_DEVICES += afoundry_ew1200
define Device/alfa-network_ax1800rm
$(Device/dsa-migration)
IMAGE_SIZE := 15488k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AX1800RM
DEVICE_PACKAGES := kmod-mt7915-firmware
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += recovery.bin
IMAGE/recovery.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += alfa-network_ax1800rm
define Device/alfa-network_quad-e4g
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := Quad-E4G
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls
SUPPORTED_DEVICES += quad-e4g
endef
TARGET_DEVICES += alfa-network_quad-e4g
define Device/ampedwireless_ally_common
$(Device/nand)
DEVICE_VENDOR := Amped Wireless
DEVICE_PACKAGES := kmod-mt7615-firmware
IMAGE_SIZE := 32768k
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'flashable-initramfs' |\
edimax-header -s CSYS -m RN68 -f 0x001c0000 -S 0x01100000
endef
define Device/ampedwireless_ally-r1900k
$(Device/ampedwireless_ally_common)
DEVICE_MODEL := ALLY-R1900K
DEVICE_PACKAGES += kmod-usb3
endef
TARGET_DEVICES += ampedwireless_ally-r1900k
define Device/ampedwireless_ally-00x19k
$(Device/ampedwireless_ally_common)
DEVICE_MODEL := ALLY-00X19K
endef
TARGET_DEVICES += ampedwireless_ally-00x19k
define Device/arcadyan_we420223-99
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := WE420223-99
DEVICE_ALT0_VENDOR := KPN
DEVICE_ALT0_MODEL := Experia WiFi
IMAGE_SIZE := 32128k
KERNEL_SIZE := 4352k
UBINIZE_OPTS := -E 5
PAGESIZE := 1
SUBPAGESIZE := 1
VID_HDR_OFFSET := 64
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x746f435d
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += arcadyan_we420223-99
define Device/asiarf_ap7621-001
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AP7621-001
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += asiarf_ap7621-001
define Device/asiarf_ap7621-nv1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AP7621-NV1
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += asiarf_ap7621-nv1
define Device/asus_rp-ac56
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RP-AC56
IMAGE_SIZE := 16000k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 \
kmod-i2c-ralink kmod-sound-mt7620 -uboot-envtools
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
endef
TARGET_DEVICES += asus_rp-ac56
define Device/asus_rp-ac87
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RP-AC87
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware rssileds -uboot-envtools
endef
TARGET_DEVICES += asus_rp-ac87
define Device/asus_rt-ac57u-v1
$(Device/dsa-migration)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC57U
DEVICE_VARIANT := v1
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AC1200GU
IMAGE_SIZE := 16064k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += asus,rt-ac57u
endef
TARGET_DEVICES += asus_rt-ac57u-v1
define Device/asus_rt-ac65p
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC65P
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
endef
TARGET_DEVICES += asus_rt-ac65p
define Device/asus_rt-ac85p
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC85P
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
endef
TARGET_DEVICES += asus_rt-ac85p
define Device/asus_rt-n56u-b1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-N56U
DEVICE_VARIANT := B1
IMAGE_SIZE := 16064k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += asus_rt-n56u-b1
define Device/asus_rt-ax53u
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX53U
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AX1800U
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-ax53u
define Device/asus_rt-ax54
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX54
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AX54HP
DEVICE_ALT1_VENDOR := ASUS
DEVICE_ALT1_MODEL := RT-AX1800HP
DEVICE_ALT2_VENDOR := ASUS
DEVICE_ALT2_MODEL := RT-AX1800S
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += asus_rt-ax54
define Device/beeline_smartbox-flash
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox Flash
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x746f435d | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += beeline_smartbox-flash
define Device/beeline_smartbox-giga
$(Device/sercomm_dxx)
IMAGE_SIZE := 24576k
SERCOMM_HWID := DBE
SERCOMM_HWVER := 10100
SERCOMM_SWVER := 1001
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox GIGA
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb3
endef
TARGET_DEVICES += beeline_smartbox-giga
define Device/beeline_smartbox-pro
$(Device/sercomm_s1500)
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox PRO
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := S1500 AWI
IMAGE_SIZE := 34816k
IMAGE/factory.img := append-kernel | sercomm-kernel-factory | \
sercomm-reset-slot1-chksum | append-ubi | check-size | \
sercomm-factory-cqr | sercomm-append-tail | sercomm-mkhash
SERCOMM_HWID := AWI
SERCOMM_HWVER := 10000
SERCOMM_ROOTFS2_OFFSET := 0x3d00000
SERCOMM_SWVER := 2020
endef
TARGET_DEVICES += beeline_smartbox-pro
define Device/beeline_smartbox-turbo
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := DF3
SERCOMM_HWVER := 10200
SERCOMM_SWVER := 1004
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox TURBO
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += beeline_smartbox-turbo
define Device/beeline_smartbox-turbo-plus
$(Device/sercomm_cxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := CQR
SERCOMM_HWVER := 10000
SERCOMM_SWVER := 2010
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox TURBO+
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += beeline_smartbox-turbo-plus
define Device/belkin_rt1800
$(Device/nand)
IMAGE_SIZE := 49152k
DEVICE_VENDOR := Belkin
DEVICE_MODEL := RT1800
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | belkin-header RT18 1 9.9.9
endef
TARGET_DEVICES += belkin_rt1800
define Device/buffalo_wsr-1166dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
IMAGE_SIZE := 15936k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WSR-1166DHP
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
SUPPORTED_DEVICES += wsr-1166
endef
TARGET_DEVICES += buffalo_wsr-1166dhp
define Device/buffalo_wsr-2533dhpl
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7936k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WSR-2533DHPL
DEVICE_ALT0_VENDOR := Buffalo
DEVICE_ALT0_MODEL := WSR-2533DHP
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += buffalo_wsr-2533dhpl
define Device/buffalo_wsr-600dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WSR-600DHP
DEVICE_PACKAGES := kmod-mt7603 kmod-rt2800-pci -uboot-envtools
SUPPORTED_DEVICES += wsr-600
endef
TARGET_DEVICES += buffalo_wsr-600dhp
define Device/bolt_arion
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := BOLT
DEVICE_MODEL := Arion
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
endef
TARGET_DEVICES += bolt_arion
define Device/comfast_cf-e390ax
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := ComFast
DEVICE_MODEL := CF-E390AX
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += comfast_cf-e390ax
define Device/comfast_cf-ew72-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := ComFast
DEVICE_MODEL := CF-EW72 V2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += comfast_cf-ew72-v2
define Device/cudy_m1800
$(Device/dsa-migration)
DEVICE_VENDOR := Cudy
DEVICE_MODEL := M1800
IMAGE_SIZE := 16064k
UIMAGE_NAME := R17
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += cudy_m1800
define Device/cudy_wr1300-v1
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += cudy,wr1300 R10
endef
TARGET_DEVICES += cudy_wr1300-v1
define Device/cudy_wr1300-v2
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
SUPPORTED_DEVICES += cudy,wr1300 R23
endef
TARGET_DEVICES += cudy_wr1300-v2
define Device/cudy_wr1300-v3
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
SUPPORTED_DEVICES += cudy,wr1300 R30
endef
TARGET_DEVICES += cudy_wr1300-v3
define Device/cudy_wr2100
$(Device/dsa-migration)
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR2100
IMAGE_SIZE := 15872k
UIMAGE_NAME := R11
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += cudy_wr2100
define Device/cudy_x6-v1
$(Device/dsa-migration)
IMAGE_SIZE := 32256k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := X6
DEVICE_VARIANT := v1
UIMAGE_NAME := R13
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
SUPPORTED_DEVICES += cudy,x6 R13
endef
TARGET_DEVICES += cudy_x6-v1
define Device/cudy_x6-v2
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := X6
DEVICE_VARIANT := v2
UIMAGE_NAME := R30
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
SUPPORTED_DEVICES += cudy,x6 R30
endef
TARGET_DEVICES += cudy_x6-v2
define Device/dlink_covr-x1860-a1
$(Device/dsa-migration)
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 8192k
IMAGE_SIZE := 40960k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := COVR-X1860
DEVICE_VARIANT := A1
DEVICE_PACKAGES := kmod-mt7915-firmware
UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin recovery.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \
append-dlink-covr-metadata $$(DEVICE_MODEL) | \
dlink-sge-image $$(DEVICE_MODEL)
endef
TARGET_DEVICES += dlink_covr-x1860-a1
define Device/dlink_dxx-1xx0-x1
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware rssileds -uboot-envtools
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | \
pad-rootfs -x 60 | append-md5sum-ascii-salted ffff | \
append-string $$$$(DLINK_HWID) | check-size
endef
define Device/dlink_dap-1620-b1
$(Device/dlink_dxx-1xx0-x1)
DEVICE_MODEL := DAP-1620
DEVICE_VARIANT := B1
DLINK_HWID := MT76XMT7621-RP-PR2475-NA
endef
TARGET_DEVICES += dlink_dap-1620-b1
define Device/dlink_dap-x1860-a1
$(Device/nand)
IMAGE_SIZE := 53248k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-X1860
DEVICE_VARIANT := A1
KERNEL_SIZE := 8192k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size | elx-header 011b0060 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7915-firmware rssileds -uboot-envtools
endef
TARGET_DEVICES += dlink_dap-x1860-a1
define Device/dlink_dir-8xx-a1
$(Device/dsa-migration)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
KERNEL := $$(KERNEL) | uimage-sgehdr
IMAGES += recovery.bin factory.bin
IMAGE/recovery.bin := append-kernel | append-rootfs | check-size
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | dlink-sge-image $$$$(DEVICE_MODEL)
endef
define Device/dlink_dir-8xx-r1
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
KERNEL_INITRAMFS := $$(KERNEL)
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
endef
define Device/dlink_dir_nand_128m
$(Device/nand)
IMAGE_SIZE := 40960k
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
KERNEL := $$(KERNEL) | uimage-sgehdr
IMAGES += recovery.bin
IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
endef
define Device/dlink_dir-1935-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-1935
DEVICE_VARIANT := A1
DEVICE_PACKAGES += kmod-usb3
endef
TARGET_DEVICES += dlink_dir-1935-a1
define Device/dlink_dir-1960-a1
$(Device/dlink_dir_nand_128m)
DEVICE_MODEL := DIR-1960
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-1960-a1
define Device/dlink_dir-2055-a1
$(Device/dlink_dir_nand_128m)
DEVICE_PACKAGES += -kmod-usb-ledtrig-usbport
DEVICE_MODEL := DIR-2055
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-2055-a1
define Device/dlink_dir-2150-a1
$(Device/dlink_dir_nand_128m)
DEVICE_MODEL := DIR-2150
DEVICE_VARIANT := A1
DEVICE_PACKAGES += kmod-mt7603 -kmod-usb3 -kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | dlink-sge-image $$(DEVICE_MODEL)
endef
TARGET_DEVICES += dlink_dir-2150-a1
define Device/dlink_dir-2640-a1
$(Device/dlink_dir_nand_128m)
DEVICE_MODEL := DIR-2640
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-2640-a1
define Device/dlink_dir-2660-a1
$(Device/dlink_dir_nand_128m)
DEVICE_MODEL := DIR-2660
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-2660-a1
define Device/dlink_dir-3040-a1
$(Device/dlink_dir_nand_128m)
DEVICE_MODEL := DIR-3040
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-3040-a1
define Device/dlink_dir-3060-a1
$(Device/dlink_dir_nand_128m)
DEVICE_MODEL := DIR-3060
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-3060-a1
define Device/dlink_dir-853-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-853
DEVICE_VARIANT := A1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += dlink_dir-853-a1
define Device/dlink_dir-853-a3
$(Device/dlink_dir_nand_128m)
DEVICE_MODEL := DIR-853
DEVICE_VARIANT := A3
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | dlink-sge-image $$(DEVICE_MODEL)
endef
TARGET_DEVICES += dlink_dir-853-a3
define Device/dlink_dir-853-r1
$(Device/dlink_dir-8xx-r1)
DEVICE_MODEL := DIR-853
DEVICE_VARIANT := R1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += dlink_dir-853-r1
define Device/dlink_dir-860l-b1
$(Device/dsa-migration)
$(Device/seama-lzma-loader)
SEAMA_SIGNATURE := wrgac13_dlink.2013gui_dir860lb
IMAGE_SIZE := 16064k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-860L
DEVICE_VARIANT := B1
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
SUPPORTED_DEVICES += dir-860l-b1
endef
TARGET_DEVICES += dlink_dir-860l-b1
define Device/dlink_dir-867-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-867
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-867-a1
define Device/dlink_dir-878-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-878
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-878-a1
define Device/dlink_dir-878-r1
$(Device/dlink_dir-8xx-r1)
DEVICE_MODEL := DIR-878
DEVICE_VARIANT := R1
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \
sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \
ab0dff19af8842cdb70a86b4b68d23f7
endef
TARGET_DEVICES += dlink_dir-878-r1
define Device/dlink_dir-882-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-882
DEVICE_VARIANT := A1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += dlink_dir-882-a1
define Device/dlink_dir-882-r1
$(Device/dlink_dir-8xx-r1)
DEVICE_MODEL := DIR-882
DEVICE_VARIANT := R1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \
sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \
ab0dff19af8842cdb70a86b4b68d23f7
endef
TARGET_DEVICES += dlink_dir-882-r1
define Device/dlink_dra-1360-a1
$(Device/dlink_dxx-1xx0-x1)
DEVICE_MODEL := DRA-1360
DEVICE_VARIANT := A1
DLINK_HWID := MT76XMT7621-RP-RA1360-NA
endef
TARGET_DEVICES += dlink_dra-1360-a1
define Device/dual-q_h721
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Dual-Q
DEVICE_MODEL := H721
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += dual-q_h721
define Device/d-team_newifi-d2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := D-Team
DEVICE_MODEL := Newifi D2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += d-team_newifi-d2
define Device/d-team_pbr-m1
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := PandoraBox
DEVICE_MODEL := PBR-M1
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += pbr-m1
endef
TARGET_DEVICES += d-team_pbr-m1
define Device/edimax_ra21s
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Edimax
DEVICE_MODEL := RA21S
DEVICE_ALT0_VENDOR := Edimax
DEVICE_ALT0_MODEL := Gemini RA21S
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 02020040 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += edimax_ra21s
define Device/edimax_re23s
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15680k
DEVICE_VENDOR := Edimax
DEVICE_MODEL := RE23S
DEVICE_ALT0_VENDOR := Edimax
DEVICE_ALT0_MODEL := Gemini RE23S
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
check-size | append-metadata
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
check-size
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += edimax_re23s
define Device/edimax_rg21s
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Edimax
DEVICE_MODEL := Gemini AC2600 RG21S
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 02020038 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += edimax_rg21s
define Device/elecom_wrc-gs
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ELECOM
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elecom-wrc-gs-factory $$$$(ELECOM_HWNAME) 0.00 -N | \
append-string MT7621_ELECOM_$$$$(ELECOM_HWNAME)
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
define Device/elecom_wmc-m1267gst2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WMC-M1267GST2
ELECOM_HWNAME := WMC-DLGST2
endef
TARGET_DEVICES += elecom_wmc-m1267gst2
define Device/elecom_wmc-s1267gs2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WMC-S1267GS2
ELECOM_HWNAME := WMC-DLGST2
endef
TARGET_DEVICES += elecom_wmc-s1267gs2
define Device/elecom_wrc-1167ghbk2-s
$(Device/dsa-migration)
IMAGE_SIZE := 15488k
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-1167GHBK2-S
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elecom-wrc-gs-factory WRC-1167GHBK2-S 0.00
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
define Device/elecom_wrc-1167gs2-b
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1167GS2-B
ELECOM_HWNAME := WRC-1167GS2
endef
TARGET_DEVICES += elecom_wrc-1167gs2-b
define Device/elecom_wrc-1167gst2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WRC-1167GST2
ELECOM_HWNAME := WRC-1167GST2
endef
TARGET_DEVICES += elecom_wrc-1167gst2
define Device/elecom_wrc-1750gs
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1750GS
ELECOM_HWNAME := WRC-1750GS
endef
TARGET_DEVICES += elecom_wrc-1750gs
define Device/elecom_wrc-1750gst2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WRC-1750GST2
ELECOM_HWNAME := WRC-1750GST2
endef
TARGET_DEVICES += elecom_wrc-1750gst2
define Device/elecom_wrc-1750gsv
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1750GSV
ELECOM_HWNAME := WRC-1750GSV
endef
TARGET_DEVICES += elecom_wrc-1750gsv
define Device/elecom_wrc-1900gst
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1900GST
ELECOM_HWNAME := WRC-1900GST
endef
TARGET_DEVICES += elecom_wrc-1900gst
define Device/elecom_wrc-2533ghbk2-t
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-2533GHBK2-T
IMAGE_SIZE := 7808k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 0107003b 8844A2D168B45A2D | \
elecom-product-header WRC-2533GHBK2-T
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += elecom_wrc-2533ghbk2-t
define Device/elecom_wrc-2533ghbk-i
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-2533GHBK-I
IMAGE_SIZE := 9856k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 0107002d 8844A2D168B45A2D | \
elecom-product-header WRC-2533GHBK-I
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += elecom_wrc-2533ghbk-i
define Device/elecom_wrc-2533gs2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-2533GS2
ELECOM_HWNAME := WRC-2533GS2
endef
TARGET_DEVICES += elecom_wrc-2533gs2
define Device/elecom_wrc-2533gst
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-2533GST
ELECOM_HWNAME := WRC-2533GST
endef
TARGET_DEVICES += elecom_wrc-2533gst
define Device/elecom_wrc-2533gst2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WRC-2533GST2
ELECOM_HWNAME := WRC-2533GST2
endef
TARGET_DEVICES += elecom_wrc-2533gst2
define Device/elecom_wrc-x1800gs
$(Device/nand)
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-X1800GS
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
znet-header 4.04(XVF.1)b90 COMC 0x68 | elecom-product-header WRC-X1800GS
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_SIZE := 8192k
IMAGE_SIZE := 51456k
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
znet-header 4.04(XVF.1)b90 COMC 0x68 | elecom-product-header WRC-X1800GS | \
check-size
endif
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += elecom_wrc-x1800gs
define Device/etisalat_s3
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := DDK
SERCOMM_HWVER := 10000
SERCOMM_SWVER := 4009
DEVICE_VENDOR := Etisalat
DEVICE_MODEL := S3
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := S3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += etisalat_s3
define Device/firefly_firewrt
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Firefly
DEVICE_MODEL := FireWRT
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
SUPPORTED_DEVICES += firewrt
endef
TARGET_DEVICES += firefly_firewrt
define Device/gehua_ghl-r-001
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := GeHua
DEVICE_MODEL := GHL-R-001
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += gehua_ghl-r-001
define Device/glinet_gl-mt1300
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT1300
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += glinet_gl-mt1300
define Device/gnubee_gb-pc1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := GB-PC1
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
IMAGE_SIZE := 32448k
endef
TARGET_DEVICES += gnubee_gb-pc1
define Device/gnubee_gb-pc2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := GB-PC2
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
IMAGE_SIZE := 32448k
endef
TARGET_DEVICES += gnubee_gb-pc2
define Device/hanyang_hyc-g920
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Hanyang
DEVICE_MODEL := CJ-Hello HYC-G920
IMAGE_SIZE := 15744k
DEVICE_PACKAGES := kmod-usb3 kmod-mt76x2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += hanyang_hyc-g920
define Device/h3c_tx180x
$(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 120832k
KERNEL_LOADADDR := 0x82000000
KERNEL_INITRAMFS := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL := $$(KERNEL_INITRAMFS) | h3c-blank-header
DEVICE_VENDOR := H3C
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
define Device/h3c_tx1800-plus
$(Device/h3c_tx180x)
DEVICE_MODEL := TX1800 Plus
endef
TARGET_DEVICES += h3c_tx1800-plus
define Device/h3c_tx1801-plus
$(Device/h3c_tx180x)
DEVICE_MODEL := TX1801 Plus
endef
TARGET_DEVICES += h3c_tx1801-plus
define Device/h3c_tx1806
$(Device/h3c_tx180x)
DEVICE_MODEL := TX1806
endef
TARGET_DEVICES += h3c_tx1806
define Device/haier-sim_wr1800k
$(Device/nand)
IMAGE_SIZE := 125440k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
haier-sim_wr1800k-factory
endif
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
define Device/haier_har-20s2u1
$(Device/haier-sim_wr1800k)
DEVICE_VENDOR := Haier
DEVICE_MODEL := HAR-20S2U1
endef
TARGET_DEVICES += haier_har-20s2u1
define Device/hilink_hlk-7621a-evb
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := HiLink
DEVICE_MODEL := HLK-7621A evaluation board
DEVICE_PACKAGES += kmod-mt76x2 kmod-usb3 -uboot-envtools
IMAGE_SIZE := 32448k
endef
TARGET_DEVICES += hilink_hlk-7621a-evb
define Device/hiwifi_hc5962
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32768k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5962
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += hiwifi_hc5962
define Device/humax_e10
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15936k
DEVICE_VENDOR := HUMAX
DEVICE_MODEL := E10
DEVICE_ALT0_VENDOR := HUMAX
DEVICE_ALT0_MODEL := QUANTUM E10
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | pad-rootfs | \
check-size | append-metadata
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | \
edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | \
check-size | zip upg -P f013c26cf0a320fb71d03356dcb6bb63
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += humax_e10
define Device/huasifei_ws1208v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WS1208V2
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
kmod-usb3 kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan \
kmod-usb-serial-option -uboot-envtools
endef
TARGET_DEVICES += huasifei_ws1208v2
define Device/iodata_wn-ax1167gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15552k
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AX1167GR
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
check-size 7680k | senao-header -r 0x30a -p 0x1055 -t 4
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-ax1167gr
define Device/iodata_nand
$(Device/nand)
DEVICE_VENDOR := I-O DATA
IMAGE_SIZE := 51200k
LOADER_TYPE := bin
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma | uImage lzma
endef
# The OEM webinterface expects an kernel with initramfs which has the uImage
# header field ih_name.
# We don't want to set the header name field for the kernel include in the
# sysupgrade image as well, as this image shouldn't be accepted by the OEM
# webinterface. It will soft-brick the board.
define Device/iodata_wn-ax1167gr2
$(Device/iodata_nand)
DEVICE_MODEL := WN-AX1167GR2
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d42 -n '3.10(XBC.1)b10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-ax1167gr2
define Device/iodata_wn-ax2033gr
$(Device/iodata_nand)
DEVICE_MODEL := WN-AX2033GR
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d42 -n '3.10(VST.1)C10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-ax2033gr
define Device/iodata_wn-deax1800gr
$(Device/dsa-migration)
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-DEAX1800GR
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 47104k
UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
check-size | xor-image -p 29944a25120984c2 -x | \
iodata-mstc-header2 WN-DEAX1800GR 00021003
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += iodata_wn-deax1800gr
define Device/iodata_wn-dx1167r
$(Device/iodata_nand)
DEVICE_MODEL := WN-DX1167R
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d43 -n '3.10(XIK.1)b10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-dx1167r
define Device/iodata_wn-dx1200gr
$(Device/iodata_nand)
DEVICE_MODEL := WN-DX1200GR
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d43 -n '3.10(XIQ.0)b20' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
endef
TARGET_DEVICES += iodata_wn-dx1200gr
define Device/iodata_wn-dx2033gr
$(Device/iodata_nand)
DEVICE_MODEL := WN-DX2033GR
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d42 -n '3.10(XID.0)b30' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-dx2033gr
define Device/iodata_wn-gx300gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7616k
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-GX300GR
DEVICE_PACKAGES := kmod-mt7603 -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-gx300gr
define Device/iodata_wnpr2600g
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WNPR2600G
IMAGE_SIZE := 13952k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 0104003a 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wnpr2600g
define Device/iptime_a3002mesh
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a3002me
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3002MESH
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iptime_a3002mesh
define Device/iptime_a3004ns-dual
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a3004nd
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3004NS-dual
DEVICE_PACKAGES := kmod-usb3 kmod-mt76x2 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
TARGET_DEVICES += iptime_a3004ns-dual
define Device/iptime_a3004t
$(Device/nand)
$(Device/uimage-lzma-loader)
FILESYSTEMS := squashfs
IMAGE_SIZE := 129280k
UIMAGE_NAME := a3004t
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3004T
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += iptime_a3004t
define Device/iptime_a6004ns-m
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a6004nm
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A6004NS-M
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += iptime_a6004ns-m
define Device/iptime_a6ns-m
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a6nm
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A6ns-M
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += iptime_a6ns-m
define Device/iptime_a8004t
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a8004t
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A8004T
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += iptime_a8004t
define Device/iptime_ax2004m
$(Device/nand)
IMAGE_SIZE := 121344k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
check-size | iptime-crc32 ax2004m
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := AX2004M
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := NMBM has been newly enabled, and its flash block \
mapping might be incompatible with existing installation. \
New installation with factory image via recovery mode is recommended.
endef
TARGET_DEVICES += iptime_ax2004m
define Device/iptime_t5004
$(Device/nand)
IMAGE_SIZE := 129280k
UIMAGE_NAME := t5004
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := T5004
DEVICE_PACKAGES := -wpad-basic-mbedtls
endef
TARGET_DEVICES += iptime_t5004
define Device/jcg_jhr-ac876m
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 89.1
JCG_MAXSIZE := 16064k
DEVICE_VENDOR := JCG
DEVICE_MODEL := JHR-AC876M
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += jcg_jhr-ac876m
define Device/jcg_q20
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 91136k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := JCG
DEVICE_MODEL := Q20
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += jcg_q20
define Device/jcg_y2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 95.1
JCG_MAXSIZE := 16064k
DEVICE_VENDOR := JCG
DEVICE_MODEL := Y2
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += jcg_y2
define Device/jdcloud_re-cp-02
$(Device/dsa-migration)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := JD-Cloud
DEVICE_MODEL := RE-CP-02
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-sdhci-mt7620
endef
TARGET_DEVICES += jdcloud_re-cp-02
define Device/keenetic_kn-3010
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 31488k
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3010
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x803010 -v "KN-3010"
endef
TARGET_DEVICES += keenetic_kn-3010
define Device/lenovo_newifi-d1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Lenovo
DEVICE_MODEL := Newifi D1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += newifi-d1
endef
TARGET_DEVICES += lenovo_newifi-d1
define Device/linksys_e5600
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 26624k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E5600
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | gemtek-trailer
endef
TARGET_DEVICES += linksys_e5600
define Device/linksys_e7350
$(Device/belkin_rt1800)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E7350
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | belkin-header GOLF 1 9.9.9
endef
TARGET_DEVICES += linksys_e7350
define Device/linksys_ea7xxx
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 36864k
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
endef
define Device/linksys_ea6350-v4
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA6350
DEVICE_VARIANT := v4
LINKSYS_HWNAME := EA6350
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7663-firmware-ap
endef
TARGET_DEVICES += linksys_ea6350-v4
define Device/linksys_ea7300-v1
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA7300
DEVICE_VARIANT := v1
LINKSYS_HWNAME := EA7300
endef
TARGET_DEVICES += linksys_ea7300-v1
define Device/linksys_ea7300-v2
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA7300
DEVICE_VARIANT := v2
LINKSYS_HWNAME := EA7300v2
DEVICE_PACKAGES += kmod-mt7603
endef
TARGET_DEVICES += linksys_ea7300-v2
define Device/linksys_ea7500-v2
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA7500
DEVICE_VARIANT := v2
LINKSYS_HWNAME := EA7500v2
endef
TARGET_DEVICES += linksys_ea7500-v2
define Device/linksys_ea8100-v1
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA8100
DEVICE_VARIANT := v1
LINKSYS_HWNAME := EA8100
endef
TARGET_DEVICES += linksys_ea8100-v1
define Device/linksys_ea8100-v2
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA8100
DEVICE_VARIANT := v2
LINKSYS_HWNAME := EA8100v2
endef
TARGET_DEVICES += linksys_ea8100-v2
define Device/linksys_re6500
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := RE6500
DEVICE_PACKAGES := kmod-mt76x2 -uboot-envtools
SUPPORTED_DEVICES += re6500
endef
TARGET_DEVICES += linksys_re6500
define Device/linksys_re7000
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := RE7000
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware
endef
TARGET_DEVICES += linksys_re7000
define Device/mediatek_ap-mt7621a-v60
$(Device/dsa-migration)
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Mediatek
DEVICE_MODEL := AP-MT7621A-V60 EVB
DEVICE_PACKAGES := kmod-usb3 kmod-sdhci-mt7620 kmod-sound-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += mediatek_ap-mt7621a-v60
define Device/mediatek_mt7621-eval-board
$(Device/dsa-migration)
IMAGE_SIZE := 15104k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7621 EVB
DEVICE_PACKAGES := -wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += mt7621
endef
TARGET_DEVICES += mediatek_mt7621-eval-board
define Device/meig_slt866
$(Device/dsa-migration)
IMAGE_SIZE := 15104k
DEVICE_VENDOR := MeiG
DEVICE_MODEL := SLT866
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb3 \
kmod-usb-net-rndis
endef
TARGET_DEVICES += meig_slt866
define Device/mercusys_mr70x-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR70X
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := MR70X
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += mercusys_mr70x-v1
define Device/MikroTik
$(Device/dsa-migration)
DEVICE_VENDOR := MikroTik
IMAGE_SIZE := 16128k
DEVICE_PACKAGES := kmod-usb3 -uboot-envtools
KERNEL_NAME := vmlinuz
KERNEL := kernel-bin | append-dtb-elf
IMAGE/sysupgrade.bin := append-kernel | yaffs-filesystem -L | \
pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | \
append-metadata
endef
define Device/mikrotik_ltap-2hnd
$(Device/MikroTik)
DEVICE_MODEL := LtAP-2HnD
DEVICE_PACKAGES += kmod-ath9k kmod-pps-gpio rssileds
endef
TARGET_DEVICES += mikrotik_ltap-2hnd
define Device/mikrotik_routerboard-750gr3
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD 750Gr3
DEVICE_PACKAGES += -wpad-basic-mbedtls
SUPPORTED_DEVICES += mikrotik,rb750gr3
endef
TARGET_DEVICES += mikrotik_routerboard-750gr3
define Device/mikrotik_routerboard-760igs
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD 760iGS
DEVICE_PACKAGES += kmod-sfp -wpad-basic-mbedtls
endef
TARGET_DEVICES += mikrotik_routerboard-760igs
define Device/mikrotik_routerboard-m11g
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD M11G
DEVICE_PACKAGES := -wpad-basic-mbedtls
SUPPORTED_DEVICES += mikrotik,rbm11g
endef
TARGET_DEVICES += mikrotik_routerboard-m11g
define Device/mikrotik_routerboard-m33g
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD M33G
DEVICE_PACKAGES := -wpad-basic-mbedtls
SUPPORTED_DEVICES += mikrotik,rbm33g
endef
TARGET_DEVICES += mikrotik_routerboard-m33g
define Device/mqmaker_witi
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := MQmaker
DEVICE_MODEL := WiTi
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += witi mqmaker,witi-256m mqmaker,witi-512m
endef
TARGET_DEVICES += mqmaker_witi
define Device/mtc_wr1201
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := MTC
DEVICE_MODEL := Wireless Router WR1201
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'WR1201_8_128'
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += mtc_wr1201
define Device/mts_wg430223
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := MTS
DEVICE_MODEL := WG430223
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x53485231 | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
DEVICE_PACKAGES := kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += mts_wg430223
define Device/netgear_eax12
$(Device/nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EAX12
DEVICE_ALT0_VENDOR := NETGEAR
DEVICE_ALT0_MODEL := EAX11
DEVICE_ALT0_VARIANT := v2
DEVICE_ALT1_VENDOR := NETGEAR
DEVICE_ALT1_MODEL := EAX15
DEVICE_ALT1_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
NETGEAR_ENC_MODEL := EAX12
NETGEAR_ENC_REGION := US
NETGEAR_ENC_HW_ID_LIST := 1010000004540000_NETGEAR
NETGEAR_ENC_MODEL_LIST := EAX12;EAX11v2;EAX15v2
IMAGE_SIZE := 57344k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_eax12
define Device/netgear_ex6150
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EX6150
DEVICE_PACKAGES := kmod-mt76x2 -uboot-envtools
NETGEAR_BOARD_ID := U12H318T00_NETGEAR
IMAGE_SIZE := 14848k
IMAGES += factory.chk
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size | netgear-chk
endef
TARGET_DEVICES += netgear_ex6150
define Device/netgear_sercomm_nand
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGES += factory.img kernel.bin rootfs.bin
IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-ubi | check-size
DEVICE_VENDOR := NETGEAR
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
define Device/netgear_r6220
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6220
SERCOMM_HWNAME := R6220
SERCOMM_HWID := AYA
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0086
IMAGE_SIZE := 28672k
DEVICE_PACKAGES += kmod-mt76x2
SUPPORTED_DEVICES += r6220
endef
TARGET_DEVICES += netgear_r6220
define Device/netgear_r6260
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6260
SERCOMM_HWNAME := R6260
SERCOMM_HWID := CHJ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0052
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6260
define Device/netgear_r6350
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6350
SERCOMM_HWNAME := R6350
SERCOMM_HWID := CHJ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0052
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6350
define Device/netgear_r6700-v2
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6700
DEVICE_VARIANT := v2
DEVICE_ALT0_VENDOR := NETGEAR
DEVICE_ALT0_MODEL := Nighthawk AC2400
DEVICE_ALT0_VARIANT := v1
DEVICE_ALT1_VENDOR := NETGEAR
DEVICE_ALT1_MODEL := Nighthawk AC2100
DEVICE_ALT1_VARIANT := v1
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6700-v2
define Device/netgear_r6800
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6800
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0062
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6800
define Device/netgear_r6850
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6850
SERCOMM_HWNAME := R6850
SERCOMM_HWID := CHJ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0052
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6850
define Device/netgear_r6900-v2
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6900
DEVICE_VARIANT := v2
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6900-v2
define Device/netgear_r7200
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R7200
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r7200
define Device/netgear_r7450
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R7450
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r7450
define Device/netgear_wac104
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := WAC104
SERCOMM_HWNAME := WAC104
SERCOMM_HWID := CAY
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0006
IMAGE_SIZE := 28672k
DEVICE_PACKAGES += kmod-mt76x2
endef
TARGET_DEVICES += netgear_wac104
define Device/netgear_wac124
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := WAC124
SERCOMM_HWNAME := WAC124
SERCOMM_HWID := CTL
SERCOMM_HWVER := A003
SERCOMM_SWVER := 0x0402
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_wac124
define Device/netgear_wax202
$(Device/nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX202
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
NETGEAR_ENC_MODEL := WAX202
NETGEAR_ENC_REGION := US
IMAGE_SIZE := 38912k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_wax202
define Device/netgear_wndr3700-v5
$(Device/dsa-migration)
$(Device/netgear_sercomm_nor)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15232k
DEVICE_MODEL := WNDR3700
DEVICE_VARIANT := v5
SERCOMM_HWNAME := WNDR3700v5
SERCOMM_HWID := AYB
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1054
SERCOMM_PAD := 320k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += wndr3700v5
endef
TARGET_DEVICES += netgear_wndr3700-v5
define Device/netis_wf2881
$(Device/nand)
$(Device/uimage-lzma-loader)
FILESYSTEMS := squashfs
IMAGE_SIZE := 129280k
UIMAGE_NAME := WF2881_0.0.00
KERNEL_INITRAMFS := $$(KERNEL) | netis-tail WF2881
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := NETIS
DEVICE_MODEL := WF2881
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
TARGET_DEVICES += netis_wf2881
define Device/oraybox_x3a
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15360k
DEVICE_VENDOR := OrayBox
DEVICE_MODEL := X3A
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += oraybox_x3a
define Device/phicomm_k2p
$(Device/dsa-migration)
IMAGE_SIZE := 15744k
DEVICE_VENDOR := Phicomm
DEVICE_MODEL := K2P
DEVICE_ALT0_VENDOR := Phicomm
DEVICE_ALT0_MODEL := KE 2P
SUPPORTED_DEVICES += k2p
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += phicomm_k2p
define Device/planex_vr500
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 65216k
DEVICE_VENDOR := Planex
DEVICE_MODEL := VR500
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += vr500
endef
TARGET_DEVICES += planex_vr500
define Device/raisecom_msg1500-x-00
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 129280k
DEVICE_VENDOR := RAISECOM
DEVICE_MODEL := MSG1500
DEVICE_VARIANT := X.00
DEVICE_ALT0_VENDOR := Nokia
DEVICE_ALT0_MODEL := A-040W-Q
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += raisecom_msg1500-x-00
define Device/renkforce_ws-wn530hp3-a
$(Device/dsa-migration)
DEVICE_VENDOR := Renkforce
DEVICE_MODEL := WS-WN530HP3-A
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
IMAGE/sysupgrade.bin := append-kernel | pad-to 65536 | append-rootfs | \
check-size | append-metadata
IMAGE_SIZE := 15040k
endef
TARGET_DEVICES += renkforce_ws-wn530hp3-a
define Device/rostelecom_rt-fe-1a
$(Device/sercomm_dxx)
IMAGE_SIZE := 24576k
SERCOMM_HWID := CX4
SERCOMM_HWVER := 11300
SERCOMM_SWVER := 2010
DEVICE_VENDOR := Rostelecom
DEVICE_MODEL := RT-FE-1A
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := RT-FE-1A
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware
endef
TARGET_DEVICES += rostelecom_rt-fe-1a
define Device/rostelecom_rt-sf-1
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := DKG
SERCOMM_HWVER := 10110
SERCOMM_SWVER := 1026
DEVICE_VENDOR := Rostelecom
DEVICE_MODEL := RT-SF-1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += rostelecom_rt-sf-1
define Device/samknows_whitebox-v8
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := SamKnows
DEVICE_MODEL := Whitebox 8
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += sk-wb8
endef
TARGET_DEVICES += samknows_whitebox-v8
define Device/sercomm_na502
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 20480k
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += sercomm_na502
define Device/sercomm_na502s
$(Device/nand)
IMAGE_SIZE := 20971520
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502S
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 kmod-usb-serial \
kmod-usb-serial-xr_usb_serial_common -uboot-envtools
endef
TARGET_DEVICES += sercomm_na502s
define Device/sim_simax1800t
$(Device/haier-sim_wr1800k)
DEVICE_VENDOR := SIM
DEVICE_MODEL := SIMAX1800T
endef
TARGET_DEVICES += sim_simax1800t
define Device/snr_snr-cpe-me1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15040k
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-ME1
UIMAGE_NAME := SNR-CPE-ME1-5GHZ-MT
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x0e kmod-usb3 \
kmod-usb-ledtrig-usbport uboot-envtools
endef
TARGET_DEVICES += snr_snr-cpe-me1
define Device/snr_snr-cpe-me2-lite
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-ME2-Lite
UIMAGE_NAME := $$(DEVICE_MODEL)
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
endef
TARGET_DEVICES += snr_snr-cpe-me2-lite
define Device/snr_snr-cpe-me2-sfp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-ME2-SFP
UIMAGE_NAME := $$(DEVICE_MODEL)
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-sfp kmod-usb-ledtrig-usbport uboot-envtools
endef
TARGET_DEVICES += snr_snr-cpe-me2-sfp
define Device/storylink_sap-g3200u3
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7872k
UIMAGE_NAME := SAP-G3200
DEVICE_VENDOR := STORYLiNK
DEVICE_MODEL := SAP-G3200U3
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
SUPPORTED_DEVICES += sap-g3200u3
endef
TARGET_DEVICES += storylink_sap-g3200u3
define Device/telco-electronics_x1
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Telco Electronics
DEVICE_MODEL := X1
DEVICE_PACKAGES := kmod-usb3 kmod-mt7603 kmod-mt76x2 -uboot-envtools
endef
TARGET_DEVICES += telco-electronics_x1
define Device/tenbay_t-mb5eu-v01
$(Device/dsa-migration)
DEVICE_VENDOR := Tenbay
DEVICE_MODEL := T-MB5EU-V01
DEVICE_DTS_CONFIG := config@1
DEVICE_PACKAGES += kmod-mt7915-firmware kmod-usb3 -uboot-envtools
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 15808k
SUPPORTED_DEVICES += mt7621-dm2-t-mb5eu-v01-nor
endef
TARGET_DEVICES += tenbay_t-mb5eu-v01
define Device/thunder_timecloud
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Thunder
DEVICE_MODEL := Timecloud
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += timecloud
endef
TARGET_DEVICES += thunder_timecloud
define Device/totolink_a7000r
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
UIMAGE_NAME := C8340R1C-9999
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := A7000R
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += totolink_a7000r
define Device/totolink_x5000r
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
UIMAGE_NAME := C8343R-9999
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := X5000R
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += totolink_x5000r
define Device/tozed_zlt-s12-pro
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := TOZED
DEVICE_MODEL := ZLT S12 PRO
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 comgt-ncm -uboot-envtools
endef
TARGET_DEVICES += tozed_zlt-s12-pro
define Device/tplink_archer-ax23-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer AX23
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := ARCHER-AX23-V1
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-ax23-v1
define Device/tplink_archer-a6-v3
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer A6
DEVICE_VARIANT := V3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e \
kmod-mt7663-firmware-ap -uboot-envtools
TPLINK_BOARD_ID := ARCHER-A6-V3
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-a6-v3
define Device/tplink_archer-c6-v3
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer C6
DEVICE_VARIANT := V3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
TPLINK_BOARD_ID := ARCHER-C6-V3
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-c6-v3
define Device/tplink_archer-c6u-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer C6U
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
KERNEL := $(KERNEL_DTB) | uImage lzma
TPLINK_BOARD_ID := ARCHER-C6U-V1
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-c6u-v1
define Device/tplink_deco-m4r-v4
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Deco M4R
DEVICE_VARIANT := v4
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
KERNEL := $(KERNEL_DTB) | uImage lzma
TPLINK_BOARD_ID := DECO-M4R-V4
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_deco-m4r-v4
define Device/tplink_eap235-wall-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := EAP235-Wall
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
TPLINK_BOARD_ID := EAP235-WALL-V1
IMAGE_SIZE := 13440k
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory | \
pad-extra 128
endef
TARGET_DEVICES += tplink_eap235-wall-v1
define Device/tplink_eap613-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := EAP613
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := EAP610-V3
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | pad-to 64k
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
IMAGE_SIZE := 13248k
endef
TARGET_DEVICES += tplink_eap613-v1
define Device/tplink_eap615-wall-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := EAP615-Wall
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := EAP615-WALL-V1
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | pad-to 64k
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
IMAGE_SIZE := 13248k
endef
TARGET_DEVICES += tplink_eap615-wall-v1
define Device/tplink_ec330-g5u-v1
$(Device/nand)
LOADER := bin
IMAGE_SIZE := 49152k
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := EC330-G5u
DEVICE_ALT0_VENDOR := TP-Link
DEVICE_ALT0_MODEL := Archer C9ERT
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb-ledtrig-usbport kmod-usb3
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage-tplink-c9 standalone '$(call toupper,$(LINUX_KARCH)) \
$(VERSION_DIST) Linux-$(LINUX_VERSION)' | \
uImage-tplink-c9 firmware 'OS IMAGE ($(VERSION_DIST))'
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size
endef
TARGET_DEVICES += tplink_ec330-g5u-v1
define Device/tplink_er605-v2
$(Device/nand)
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := ER605
DEVICE_VARIANT := v2
DEVICE_PACKAGES := -wpad-basic-mbedtls kmod-usb3 -uboot-envtools
KERNEL_IN_UBI := 1
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += sysupgrade.tar
IMAGE_SIZE := 127744k
endef
TARGET_DEVICES += tplink_er605-v2
define Device/tplink_ex220-v1
$(Device/dsa-migration)
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := EX220
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := EX220-V1
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_ex220-v1
define Device/tplink_mr600-v2-eu
$(Device/dsa-migration)
$(Device/tplink-v2)
DEVICE_MODEL := MR600
DEVICE_VARIANT := v2 (EU)
TPLINK_FLASHLAYOUT := 16Mltq
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb-net-qmi-wwan uqmi kmod-usb3 -uboot-envtools
IMAGE/factory.bin := tplink-v2-image -e -a 0x10000
IMAGE/sysupgrade.bin := tplink-v2-image -s -e -a 0x10000 | check-size | \
append-metadata
KERNEL := $(KERNEL_DTB) | uImage lzma
KERNEL_INITRAMFS := $$(KERNEL) | tplink-v2-header
TPLINK_BOARD_ID := MR600-V2-EU
IMAGE_SIZE := 16384k
endef
TARGET_DEVICES += tplink_mr600-v2-eu
define Device/tplink_re350-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE350
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
TPLINK_BOARD_ID := RE350-V1
IMAGE_SIZE := 6016k
SUPPORTED_DEVICES += re350-v1
endef
TARGET_DEVICES += tplink_re350-v1
define Device/tplink_re500-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE500
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
TPLINK_BOARD_ID := RE500-V1
IMAGE_SIZE := 14208k
endef
TARGET_DEVICES += tplink_re500-v1
define Device/tplink_re650-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE650
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
TPLINK_BOARD_ID := RE650-V1
IMAGE_SIZE := 14208k
endef
TARGET_DEVICES += tplink_re650-v1
define Device/tplink_re650-v2
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE650
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
TPLINK_BOARD_ID := RE650-V2
IMAGE_SIZE := 7994k
endef
TARGET_DEVICES += tplink_re650-v2
define Device/tplink_tl-wpa8631p-v3
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := TL-WPA8631P
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
TPLINK_BOARD_ID := TL-WPA8631P-V3
IMAGE_SIZE := 7232k
endef
TARGET_DEVICES += tplink_tl-wpa8631p-v3
define Device/ubnt_edgerouter_common
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Ubiquiti
IMAGE_SIZE := 256768k
FILESYSTEMS := squashfs
KERNEL_SIZE := 3145728
KERNEL_INITRAMFS := $$(KERNEL) | \
ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES += -wpad-basic-mbedtls -uboot-envtools
DEFAULT := n
endef
define Device/ubnt_edgerouter-x
$(Device/ubnt_edgerouter_common)
DEVICE_MODEL := EdgeRouter X
SUPPORTED_DEVICES += ubnt-erx ubiquiti,edgerouterx
endef
TARGET_DEVICES += ubnt_edgerouter-x
define Device/ubnt_edgerouter-x-sfp
$(Device/ubnt_edgerouter_common)
DEVICE_MODEL := EdgeRouter X SFP
DEVICE_ALT0_VENDOR := Ubiquiti
DEVICE_ALT0_MODEL := EdgePoint R6
DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x kmod-sfp
SUPPORTED_DEVICES += ubnt-erx-sfp ubiquiti,edgerouterx-sfp
endef
TARGET_DEVICES += ubnt_edgerouter-x-sfp
define Device/ubnt_unifi-6-lite
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi 6 Lite
DEVICE_DTS_CONFIG := config@1
DEVICE_DTS_LOADADDR := 0x87000000
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7915-firmware -uboot-envtools
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 15424k
endef
TARGET_DEVICES += ubnt_unifi-6-lite
define Device/ubnt_unifi-flexhd
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi FlexHD
DEVICE_DTS_CONFIG := config@2
DEVICE_DTS_LOADADDR := 0x87000000
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware kmod-leds-ubnt-ledbar \
-uboot-envtools
IMAGE_SIZE := 15552k
endef
TARGET_DEVICES += ubnt_unifi-flexhd
define Device/ubnt_unifi-nanohd
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi nanoHD
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
IMAGE_SIZE := 15552k
endef
TARGET_DEVICES += ubnt_unifi-nanohd
define Device/ubnt_usw-flex
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi Switch Flex
DEVICE_DTS_CONFIG := config@1
DEVICE_DTS_LOADADDR := 0x87000000
DEVICE_PACKAGES += -uboot-envtools
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 14720k
endef
TARGET_DEVICES += ubnt_usw-flex
define Device/unielec_u7621-01-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-01
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += unielec_u7621-01-16m
define Device/unielec_u7621-06-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += u7621-06-256M-16M unielec,u7621-06-256m-16m
endef
TARGET_DEVICES += unielec_u7621-06-16m
define Device/unielec_u7621-06-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += unielec,u7621-06-32m
endef
TARGET_DEVICES += unielec_u7621-06-32m
define Device/unielec_u7621-06-64m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 65216k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
DEVICE_VARIANT := 64M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += unielec,u7621-06-512m-64m
endef
TARGET_DEVICES += unielec_u7621-06-64m
define Device/wavlink_wl-wn531a6
$(Device/dsa-migration)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN531A6
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 -uboot-envtools
IMAGE_SIZE := 15040k
endef
TARGET_DEVICES += wavlink_wl-wn531a6
define Device/wavlink_wl-wn533a8
$(Device/dsa-migration)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN533A8
KERNEL_INITRAMFS_SUFFIX := -WN533A8$$(KERNEL_SUFFIX)
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
IMAGE_SIZE := 15040k
endef
TARGET_DEVICES += wavlink_wl-wn533a8
define Device/wavlink_ws-wn572hp3-4g
$(Device/dsa-migration)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WS-WN572HP3
DEVICE_VARIANT := 4G
IMAGE_SIZE := 15040k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb3 kmod-usb-net-rndis comgt-ncm -uboot-envtools
endef
TARGET_DEVICES += wavlink_ws-wn572hp3-4g
define Device/wavlink_wl-wn573hx1
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN573HX1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += wavlink_wl-wn573hx1
define Device/wevo_11acnas
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
DEVICE_VENDOR := WeVO
DEVICE_MODEL := 11AC NAS Router
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += 11acnas
endef
TARGET_DEVICES += wevo_11acnas
define Device/wevo_w2914ns-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
UIMAGE_NAME := W2914NS-V2(0.0.0)
DEVICE_VENDOR := WeVO
DEVICE_MODEL := W2914NS
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += w2914nsv2
endef
TARGET_DEVICES += wevo_w2914ns-v2
define Device/wifire_s1500-nbn
$(Device/sercomm_s1500)
DEVICE_VENDOR := WiFire
DEVICE_MODEL := S1500.NBN
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := S1500 BUC
IMAGE_SIZE := 51200k
IMAGE/factory.img := append-kernel | sercomm-kernel-factory | \
sercomm-reset-slot1-chksum | append-ubi | check-size | \
sercomm-factory-cqr | sercomm-pid-setbit 0x13 | sercomm-mkhash | \
sercomm-crypto
SERCOMM_HWID := BUC
SERCOMM_HWVER := 10000
SERCOMM_ROOTFS2_OFFSET := 0x4d00000
SERCOMM_SWVER := 2015
endef
TARGET_DEVICES += wifire_s1500-nbn
define Device/winstars_ws-wn583a6
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Winstars
DEVICE_MODEL := WS-WN583A6
DEVICE_ALT0_VENDOR := Gemeita
DEVICE_ALT0_MODEL := AC2100
KERNEL_INITRAMFS_SUFFIX := -WN583A6$$(KERNEL_SUFFIX)
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += winstars_ws-wn583a6
define Device/xiaomi_nand_separate
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
IMAGES += kernel1.bin rootfs0.bin
IMAGE/kernel1.bin := append-kernel
IMAGE/rootfs0.bin := append-ubi | check-size
endef
define Device/xiaomi_mi-router-3g
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Mi Router 3G
IMAGE_SIZE := 124416k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += R3G mir3g xiaomi,mir3g
endef
TARGET_DEVICES += xiaomi_mi-router-3g
define Device/xiaomi_mi-router-3g-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 14848k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 3G
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
SUPPORTED_DEVICES += xiaomi,mir3g-v2
endef
TARGET_DEVICES += xiaomi_mi-router-3g-v2
define Device/xiaomi_mi-router-3-pro
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 255488k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 3 Pro
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += xiaomi,mir3p
endef
TARGET_DEVICES += xiaomi_mi-router-3-pro
define Device/xiaomi_mi-router-4
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Mi Router 4
IMAGE_SIZE := 124416k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2
endef
TARGET_DEVICES += xiaomi_mi-router-4
define Device/xiaomi_mi-router-4a-gigabit
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 14848k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := Gigabit Edition
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
endef
TARGET_DEVICES += xiaomi_mi-router-4a-gigabit
define Device/xiaomi_mi-router-4a-gigabit-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 14784k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := Gigabit Edition v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
endef
TARGET_DEVICES += xiaomi_mi-router-4a-gigabit-v2
define Device/xiaomi_mi-router-ac2100
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Mi Router AC2100
IMAGE_SIZE := 120320k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += xiaomi_mi-router-ac2100
define Device/xiaomi_mi-router-cr660x
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
IMAGE_SIZE := 128512k
IMAGES += firmware.bin
IMAGE/firmware.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES += kmod-mt7915-firmware
endef
define Device/xiaomi_mi-router-cr6606
$(Device/xiaomi_mi-router-cr660x)
DEVICE_MODEL := Mi Router CR6606
endef
TARGET_DEVICES += xiaomi_mi-router-cr6606
define Device/xiaomi_mi-router-cr6608
$(Device/xiaomi_mi-router-cr660x)
DEVICE_MODEL := Mi Router CR6608
endef
TARGET_DEVICES += xiaomi_mi-router-cr6608
define Device/xiaomi_mi-router-cr6609
$(Device/xiaomi_mi-router-cr660x)
DEVICE_MODEL := Mi Router CR6609
endef
TARGET_DEVICES += xiaomi_mi-router-cr6609
define Device/xiaomi_redmi-router-ac2100
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Redmi Router AC2100
IMAGE_SIZE := 120320k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware
endef
TARGET_DEVICES += xiaomi_redmi-router-ac2100
define Device/xiaoyu_xy-c5
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := XiaoYu
DEVICE_MODEL := XY-C5
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 -wpad-basic-mbedtls \
-uboot-envtools
endef
TARGET_DEVICES += xiaoyu_xy-c5
define Device/xzwifi_creativebox-v1
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := CreativeBox
DEVICE_MODEL := v1
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
kmod-usb3 -wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += xzwifi_creativebox-v1
define Device/youhua_wr1200js
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := YouHua
DEVICE_MODEL := WR1200JS
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += youhua_wr1200js
define Device/youku_yk-l2
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Youku
DEVICE_MODEL := YK-L2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
UIMAGE_MAGIC := 0x12291000
UIMAGE_NAME := 400000000000000000003000
endef
TARGET_DEVICES += youku_yk-l2
define Device/yuncore_ax820
$(Device/dsa-migration)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := YunCore
DEVICE_MODEL := AX820
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += yuncore_ax820
define Device/yuncore_fap640
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := YunCore
DEVICE_MODEL := FAP640
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += yuncore_fap640
define Device/yuncore_fap690
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := YunCore
DEVICE_MODEL := FAP690
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += yuncore_fap690
define Device/yuncore_g720
$(Device/dsa-migration)
DEVICE_VENDOR := YunCore
DEVICE_MODEL := G720
DEVICE_PACKAGES := kmod-mt7915-firmware
IMAGE_SIZE := 15808k
SUPPORTED_DEVICES += mt7621-rfb-ax-nor
endef
TARGET_DEVICES += yuncore_g720
define Device/z-router_zr-2660
$(Device/dsa-migration)
$(Device/nand)
DEVICE_VENDOR := Z-ROUTER
DEVICE_MODEL := ZR-2660
DEVICE_ALT0_VENDOR := Routerich
DEVICE_ALT0_MODEL := AX1800
IMAGE_SIZE := 90112k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
DEVICE_PACKAGES += kmod-mt7915-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += z-router_zr-2660
define Device/zbtlink_zbt-we1326
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE1326
DEVICE_ALT0_VENDOR := Wiflyer
DEVICE_ALT0_MODEL := WF3526-P
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
-uboot-envtools
SUPPORTED_DEVICES += zbt-we1326
endef
TARGET_DEVICES += zbtlink_zbt-we1326
define Device/zbtlink_zbt-we3526
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE3526
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-we3526
define Device/zbtlink_zbt-wg1602-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1602
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1602-16m
define Device/zbtlink_zbt-wg1602-v04-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1602-V04
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1602-v04-16m
define Device/zbtlink_zbt-wg1602-v04-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32128k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1602-V04
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1602-v04-32m
define Device/zbtlink_zbt-wg1608-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1608
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1608-16m
define Device/zbtlink_zbt-wg1608-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1608
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += zbtlink_zbt-wg1608-32m
define Device/zbtlink_zbt-wg2626
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG2626
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += zbt-wg2626
endef
TARGET_DEVICES += zbtlink_zbt-wg2626
define Device/zbtlink_zbt-wg3526-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG3526
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += zbt-wg3526 zbt-wg3526-16M
endef
TARGET_DEVICES += zbtlink_zbt-wg3526-16m
define Device/zbtlink_zbt-wg3526-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG3526
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += ac1200pro zbt-wg3526-32M
endef
TARGET_DEVICES += zbtlink_zbt-wg3526-32m
define Device/zio_freezio
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ZIO
DEVICE_MODEL := FREEZIO
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zio_freezio
define Device/zyxel_lte3301-plus
$(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := LTE3301-PLUS
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport \
kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
endef
TARGET_DEVICES += zyxel_lte3301-plus
define Device/zyxel_lte5398-m904
$(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := LTE5398-M904
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 uqmi \
kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb-ledtrig-usbport
KERNEL := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
endef
TARGET_DEVICES += zyxel_lte5398-m904
define Device/zyxel_nr7101
$(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NR7101
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) 9.99(ABUV.9)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
endef
TARGET_DEVICES += zyxel_nr7101
define Device/zyxel_nwa-ax
$(Device/nand)
DEVICE_VENDOR := ZyXEL
KERNEL_SIZE := 8192k
DEVICE_PACKAGES := kmod-mt7915-firmware zyxel-bootconfig
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin ramboot-factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | zyxel-nwa-fit
IMAGE/ramboot-factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
endef
define Device/zyxel_nwa50ax
$(Device/zyxel_nwa-ax)
DEVICE_MODEL := NWA50AX
endef
TARGET_DEVICES += zyxel_nwa50ax
define Device/zyxel_nwa55axe
$(Device/zyxel_nwa-ax)
DEVICE_MODEL := NWA55AXE
endef
TARGET_DEVICES += zyxel_nwa55axe
define Device/zyxel_wap6805
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WAP6805
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii -uboot-envtools
KERNEL := $$(KERNEL/lzma-loader) | uImage none | uimage-padhdr 160
endef
TARGET_DEVICES += zyxel_wap6805
define Device/zyxel_wsm20
$(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 41943040
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WSM20
DEVICE_PACKAGES := kmod-mt7915-firmware
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
endef
TARGET_DEVICES += zyxel_wsm20
Reference in New Issue View Git Blame Copy Permalink