openwrt/target/linux/lantiq/dts/DGN1000B.dts
Martin Blumenstingl 6b94234a65 lantiq: remove "init" kernel command line parameter from bootargs
/etc/preinit has been the default init-script for a very long time (at
least since Linux 2.6.30 in OpenWrt). Remove the kernel command line
"init" parameter to get rid of duplicate and inconsistent definitions
of this parameter (some boards, like FRITZ3370 for example did not use
it at all, while it's just copy and paste on others).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-12-12 09:57:40 +01:00

168 lines
3.0 KiB
Plaintext

/dts-v1/;
#include "amazonse.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "DGN1000B - Netgear DGN1000B";
chosen {
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-dsl = &dsl;
led-internet = &online_green;
};
};
memory@0 {
reg = <0x0 0x1000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
asc {
lantiq,groups = "asc";
lantiq,function = "asc";
};
keys_in {
lantiq,pins = "io0",/* "io25", */"io29";
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs1";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mac-address = [ 00 11 22 33 44 55 ];
};
spi@E100800 {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
m25p80@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <1 0>;
spi-max-frequency = <5000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "SPI (RO) U-Boot Image";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "ENV_MAC";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "DPF";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "NVRAM";
read-only;
};
partition@500000 {
reg = <0x50000 0x003a0000>;
label = "kernel";
};
};
};
};
ifxhcd@E101000 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl: dsl {
label = "dgn1000b:green:dsl";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
online_green: online {
label = "dgn1000b:green:online";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
online2 {
label = "dgn1000b:red:online";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps {
label = "dgn1000b:green:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power: power {
label = "dgn1000b:green:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
/*
power red is missing
*/
};
};