openwrt/target/linux/ramips/dts/ZBT-WR8305RT.dts
Mathias Kresin a58535771f ramips: set usb led trigger via devicetree
Assign the usbdev trigger via devicetree for all subtargets and drop
the userspace handling of the usb leds.

With the change all usb ports are triggering the usb led instead of
only usb 1.1 XOR usb 2.0 XOR usb 3.0 as it was before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-07 11:34:18 +02:00

123 lines
1.9 KiB
Plaintext

/dts-v1/;
#include "mt7620n.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
model = "Zbtlink ZBT-WR8305RT";
aliases {
led-status = &led_sys;
};
gpio-leds {
compatible = "gpio-leds";
led_sys: sys {
label = "zbt-wr8305rt:green:sys";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
lan {
label = "zbt-wr8305rt:green:usb";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
wifi {
label = "zbt-wr8305rt:green:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "uartf", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};