Roger Pueyo Centelles a524a0dff8 ath79: mikrotik: enable SFP on RB922UAGS-5HPaCD ... This patch enables the SFP cage on the MikroTik RouterBOARD 922UAGS-5HPacD. GPIO16 (tx-disable-gpios) should be governed by the SFP driver to enable or disable transmission, but no change is observed. Therefore, it is left as output high to ensure the SFP module is forced to transmit. Tested on a RouterBOARD 922UAGS-5HPacD board, with a CISCO GLC-LH-SMD 1310nm module and an unbranded GLC-T RJ45 Gigabit module. PC=>router iperf3 tests deliver 440/300 Mbps up/down, both via regular eth0 port or SFP port with RJ45 module. Bridge between eth0 and eth1 delivers 950 Mbps symmetric. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 4387fe00cb)		2021-04-30 10:26:34 +02:00
..
board.d	ath79: mikrotik: enable SFP on RB922UAGS-5HPaCD	2021-04-30 10:26:34 +02:00
hotplug.d/firmware	ath79: add support for MikroTik RouterBOARD wAPR-2nD (wAP R)	2020-12-22 19:11:50 +01:00
uci-defaults	ath79: remove model name from LED labels	2020-10-02 13:51:39 +02:00