mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
c6ddf8d502
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
356 lines
7.7 KiB
Diff
356 lines
7.7 KiB
Diff
From 0c767bcfe1b4d940f2889820f12d278cbba764b5 Mon Sep 17 00:00:00 2001
|
|
From: Alex Marginean <alexandru.marginean@nxp.com>
|
|
Date: Tue, 27 Aug 2019 15:12:00 +0300
|
|
Subject: [PATCH] arm64: dts: ls1028a: define networking options for QDS
|
|
|
|
Defines connectivity for a few serdes protocol combinations (85xx, 65xx,
|
|
13xx, 9999, 7777).
|
|
|
|
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
|
|
---
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi | 20 ++++++++
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi | 20 ++++++++
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi | 56 ++++++++++++++++++++
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi | 19 +++++++
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi | 60 ++++++++++++++++++++++
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi | 48 +++++++++++++++++
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi | 44 ++++++++++++++++
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 27 ++++++++++
|
|
8 files changed, 294 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
|
|
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi
|
|
@@ -0,0 +1,20 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Device Tree Include file for LS1028A QDS board, serdes 1xxx
|
|
+ *
|
|
+ * Copyright 2019 NXP
|
|
+ *
|
|
+ */
|
|
+
|
|
+&mdio_slot1 {
|
|
+ slot1_sgmii: ethernet-phy@2 {
|
|
+ /* AQR112 */
|
|
+ reg = <0x2>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+};
|
|
+
|
|
+&enetc_port0 {
|
|
+ phy-handle = <&slot1_sgmii>;
|
|
+ phy-connection-type = "usxgmii";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi
|
|
@@ -0,0 +1,20 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Device Tree Include file for LS1028A QDS board, serdes 6xxx
|
|
+ *
|
|
+ * Copyright 2019 NXP
|
|
+ *
|
|
+ */
|
|
+
|
|
+&mdio_slot1 {
|
|
+ slot1_sgmii: ethernet-phy@2 {
|
|
+ /* AQR112 */
|
|
+ reg = <0x2>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+};
|
|
+
|
|
+&enetc_port0 {
|
|
+ phy-handle = <&slot1_sgmii>;
|
|
+ phy-connection-type = "2500base-x";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
|
|
@@ -0,0 +1,56 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Device Tree Include file for LS1028A QDS board, serdes 9999
|
|
+ *
|
|
+ * Copyright 2019 NXP
|
|
+ *
|
|
+ */
|
|
+
|
|
+&mdio_slot1 {
|
|
+ /* two ports on AQR412 */
|
|
+ slot1_sxgmii2: ethernet-phy@2 {
|
|
+ reg = <0x2>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+ slot1_sxgmii3: ethernet-phy@3 {
|
|
+ reg = <0x3>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio_slot2 {
|
|
+ slot2_sxgmii0: ethernet-phy@2 {
|
|
+ /* AQR112 */
|
|
+ reg = <0x2>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio_slot3 {
|
|
+ slot3_sxgmii0: ethernet-phy@2 {
|
|
+ /* AQR112 */
|
|
+ reg = <0x2>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+};
|
|
+
|
|
+/* l2switch ports */
|
|
+&switch_port0 {
|
|
+ phy-handle = <&slot1_sxgmii2>;
|
|
+ phy-connection-type = "2500base-x";
|
|
+};
|
|
+
|
|
+&switch_port1 {
|
|
+ phy-handle = <&slot2_sxgmii0>;
|
|
+ phy-connection-type = "2500base-x";
|
|
+};
|
|
+
|
|
+&switch_port2 {
|
|
+ phy-handle = <&slot3_sxgmii0>;
|
|
+ phy-connection-type = "2500base-x";
|
|
+};
|
|
+
|
|
+&switch_port3 {
|
|
+ phy-handle = <&slot1_sxgmii3>;
|
|
+ phy-connection-type = "2500base-x";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi
|
|
@@ -0,0 +1,19 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Device Tree Include file for LS1028A QDS board, serdes 8xxx
|
|
+ *
|
|
+ * Copyright 2019 NXP
|
|
+ *
|
|
+ */
|
|
+
|
|
+&mdio_slot1 {
|
|
+ slot1_sgmii: ethernet-phy@1c {
|
|
+ /* 1st port on VSC8234 */
|
|
+ reg = <0x1c>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&enetc_port0 {
|
|
+ phy-handle = <&slot1_sgmii>;
|
|
+ phy-connection-type = "sgmii";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
|
|
@@ -0,0 +1,60 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Device Tree Include file for LS1028A QDS board, serdes 9999
|
|
+ *
|
|
+ * Copyright 2019 NXP
|
|
+ *
|
|
+ */
|
|
+
|
|
+&mdio_slot1 {
|
|
+ /* VSC8234 */
|
|
+ slot1_sgmii0: ethernet-phy@1c {
|
|
+ reg = <0x1c>;
|
|
+ };
|
|
+ slot1_sgmii1: ethernet-phy@1d {
|
|
+ reg = <0x1d>;
|
|
+ };
|
|
+ slot1_sgmii2: ethernet-phy@1e {
|
|
+ reg = <0x1e>;
|
|
+ };
|
|
+ slot1_sgmii3: ethernet-phy@1f {
|
|
+ reg = <0x1f>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio_slot2 {
|
|
+ /* VSC8234 */
|
|
+ slot2_sgmii0: ethernet-phy@1c {
|
|
+ reg = <0x1c>;
|
|
+ };
|
|
+ slot2_sgmii1: ethernet-phy@1d {
|
|
+ reg = <0x1d>;
|
|
+ };
|
|
+ slot2_sgmii2: ethernet-phy@1e {
|
|
+ reg = <0x1e>;
|
|
+ };
|
|
+ slot2_sgmii3: ethernet-phy@1f {
|
|
+ reg = <0x1f>;
|
|
+ };
|
|
+};
|
|
+
|
|
+/* l2switch ports */
|
|
+&switch_port0 {
|
|
+ phy-handle = <&slot1_sgmii0>;
|
|
+ phy-connection-type = "sgmii";
|
|
+};
|
|
+
|
|
+&switch_port1 {
|
|
+ phy-handle = <&slot2_sgmii0>;
|
|
+ phy-connection-type = "sgmii";
|
|
+};
|
|
+
|
|
+&switch_port2 {
|
|
+ phy-handle = <&slot1_sgmii2>;
|
|
+ phy-connection-type = "sgmii";
|
|
+};
|
|
+
|
|
+&switch_port3 {
|
|
+ phy-handle = <&slot1_sgmii3>;
|
|
+ phy-connection-type = "sgmii";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
|
|
@@ -0,0 +1,48 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Device Tree Include file for LS1028A QDS board, serdes x3xx
|
|
+ *
|
|
+ * Copyright 2019 NXP
|
|
+ *
|
|
+ */
|
|
+
|
|
+&mdio_slot2 {
|
|
+ /* 4 ports on AQR412 */
|
|
+ slot2_qsgmii0: ethernet-phy@0 {
|
|
+ reg = <0x0>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+ slot2_qsgmii1: ethernet-phy@1 {
|
|
+ reg = <0x1>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+ slot2_qsgmii2: ethernet-phy@2 {
|
|
+ reg = <0x2>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+ slot2_qsgmii3: ethernet-phy@3 {
|
|
+ reg = <0x3>;
|
|
+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
+ };
|
|
+};
|
|
+
|
|
+/* l2switch ports */
|
|
+&switch_port0 {
|
|
+ phy-handle = <&slot2_qsgmii0>;
|
|
+ phy-connection-type = "usxgmii";
|
|
+};
|
|
+
|
|
+&switch_port1 {
|
|
+ phy-handle = <&slot2_qsgmii1>;
|
|
+ phy-connection-type = "usxgmii";
|
|
+};
|
|
+
|
|
+&switch_port2 {
|
|
+ phy-handle = <&slot2_qsgmii2>;
|
|
+ phy-connection-type = "usxgmii";
|
|
+};
|
|
+
|
|
+&switch_port3 {
|
|
+ phy-handle = <&slot2_qsgmii3>;
|
|
+ phy-connection-type = "usxgmii";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
|
|
@@ -0,0 +1,44 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Device Tree Include file for LS1028A QDS board, serdes x5xx
|
|
+ *
|
|
+ * Copyright 2019 NXP
|
|
+ *
|
|
+ */
|
|
+
|
|
+&mdio_slot2 {
|
|
+ /* 4 ports on VSC8514 */
|
|
+ slot2_qsgmii0: ethernet-phy@8 {
|
|
+ reg = <0x8>;
|
|
+ };
|
|
+ slot2_qsgmii1: ethernet-phy@9 {
|
|
+ reg = <0x9>;
|
|
+ };
|
|
+ slot2_qsgmii2: ethernet-phy@a {
|
|
+ reg = <0xa>;
|
|
+ };
|
|
+ slot2_qsgmii3: ethernet-phy@b {
|
|
+ reg = <0xb>;
|
|
+ };
|
|
+};
|
|
+
|
|
+/* l2switch ports */
|
|
+&switch_port0 {
|
|
+ phy-handle = <&slot2_qsgmii0>;
|
|
+ phy-connection-type = "qsgmii";
|
|
+};
|
|
+
|
|
+&switch_port1 {
|
|
+ phy-handle = <&slot2_qsgmii1>;
|
|
+ phy-connection-type = "qsgmii";
|
|
+};
|
|
+
|
|
+&switch_port2 {
|
|
+ phy-handle = <&slot2_qsgmii2>;
|
|
+ phy-connection-type = "qsgmii";
|
|
+};
|
|
+
|
|
+&switch_port3 {
|
|
+ phy-handle = <&slot2_qsgmii3>;
|
|
+ phy-connection-type = "qsgmii";
|
|
+};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
|
|
@@ -104,6 +104,30 @@
|
|
reg = <5>;
|
|
};
|
|
};
|
|
+
|
|
+ mdio_slot1: mdio@4 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <4>;
|
|
+ };
|
|
+
|
|
+ mdio_slot2: mdio@5 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <5>;
|
|
+ };
|
|
+
|
|
+ mdio_slot3: mdio@6 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <6>;
|
|
+ };
|
|
+
|
|
+ mdio_slot4: mdio@7 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <7>;
|
|
+ };
|
|
};
|
|
};
|
|
|
|
@@ -260,3 +284,6 @@
|
|
edp_num_lanes = <0x4>;
|
|
status = "okay";
|
|
};
|
|
+
|
|
+#include "fsl-ls1028a-qds-8xxx.dtsi"
|
|
+#include "fsl-ls1028a-qds-x5xx.dtsi"
|