David Bauer e67da34431 ath79: add support for devolo WiFi pro 1750c ... Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 3T3R WiFi5: QCA9880 3T3R BTN: 1x Reset LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to reset-button There is also a Micro-B USB-port present but this only seems to be a dummy as the circuit next to it is not present (at least in my unit). It is also not mentioned in the devolo manual. Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>		2018-12-27 14:06:38 +01:00
..
01_leds	ath79: add support for TP-Link Archer C7 v5	2018-12-27 14:06:38 +01:00
02_network	ath79: add support for devolo WiFi pro 1750c	2018-12-27 14:06:38 +01:00
03_gpio_switches	ath79: add d-link dir-825-c1 and dir-835-a1	2018-12-17 00:21:34 +01:00