mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
b40e6bc55f
In ath79, for several SoCs the console bootargs are defined to the
very same value in every device's DTS. Consolidate these definitions
in the SoC dtsi files and drop further redundant definitions elsewhere.
The only device without any bootargs set has been OpenMesh OM5P-AC V2.
This will now inherit the setting from qca955x.dtsi
While this is a cosmetic change, backporting it to 19.07 will be a
major help for anyone doing backports of device support. Without it,
every backporter would have to remember to manually add the chosen node
to the device's DTS.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 635f111148)
321 lines
5.9 KiB
Plaintext
321 lines
5.9 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
#include <dt-bindings/clock/ath79-clk.h>
|
|
#include "ath79.dtsi"
|
|
|
|
/ {
|
|
compatible = "qca,qca9560";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200n8";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "mips,mips74Kc";
|
|
clocks = <&pll ATH79_CLK_CPU>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
extosc: ref {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-output-names = "ref";
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
ahb {
|
|
apb {
|
|
ddr_ctrl: memory-controller@18000000 {
|
|
compatible = "qca,qca9560-ddr-controller",
|
|
"qca,ar7240-ddr-controller";
|
|
reg = <0x18000000 0x100>;
|
|
|
|
#qca,ddr-wb-channel-cells = <1>;
|
|
};
|
|
|
|
uart: uart@18020000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x18020000 0x20>;
|
|
|
|
interrupts = <3>;
|
|
|
|
clocks = <&pll ATH79_CLK_REF>;
|
|
clock-names = "uart";
|
|
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
no-loopback-test;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio: gpio@18040000 {
|
|
compatible = "qca,qca9560-gpio",
|
|
"qca,ar9340-gpio";
|
|
reg = <0x18040000 0x28>;
|
|
|
|
interrupts = <2>;
|
|
ngpios = <24>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pinmux: pinmux@1804002c {
|
|
compatible = "pinctrl-single";
|
|
|
|
reg = <0x1804002c 0x44>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
jtag_disable_pins: pinmux_jtag_disable_pins {
|
|
pinctrl-single,bits = <0x40 0x2 0x2>;
|
|
};
|
|
};
|
|
|
|
pll: pll-controller@18050000 {
|
|
compatible = "qca,qca9560-pll", "syscon";
|
|
reg = <0x18050000 0x50>;
|
|
|
|
#clock-cells = <1>;
|
|
clock-output-names = "cpu", "ddr", "ahb";
|
|
|
|
clocks = <&extosc>;
|
|
};
|
|
|
|
wdt: wdt@18060008 {
|
|
compatible = "qca,ar7130-wdt";
|
|
reg = <0x18060008 0x8>;
|
|
|
|
interrupts = <4>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "wdt";
|
|
};
|
|
|
|
rst: reset-controller@1806001c {
|
|
compatible = "qca,qca9560-reset",
|
|
"qca,ar7100-reset";
|
|
reg = <0x1806001c 0x4>;
|
|
|
|
#reset-cells = <1>;
|
|
interrupt-parent = <&cpuintc>;
|
|
|
|
intc3: interrupt-controller {
|
|
compatible = "qca,ar9340-intc";
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <3>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
qca,int-status-addr = <0xac>;
|
|
qca,pending-bits = <0x1f000>, /* pcie rc */
|
|
<0x1000000>, /* usb1 */
|
|
<0x10000000>; /* usb2 */
|
|
};
|
|
};
|
|
|
|
rst2: reset-controller@180600c0 {
|
|
compatible = "qca,qca9560-reset",
|
|
"qca,ar7100-reset",
|
|
"simple-bus";
|
|
reg = <0x180600c0 0x4>;
|
|
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
gmac: gmac@18070000 {
|
|
compatible = "qca,qca9560-gmac";
|
|
reg = <0x18070000 0x64>;
|
|
};
|
|
|
|
wmac: wmac@18100000 {
|
|
compatible = "qca,qca9560-wmac";
|
|
reg = <0x18100000 0x10000>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie: pcie-controller@18250000 {
|
|
compatible = "qcom,ar7240-pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x0 0x0>;
|
|
reg = <0x18250000 0x1000>, /* CRP */
|
|
<0x18280000 0x100>, /* CTRL */
|
|
<0x16000000 0x1000>; /* CFG */
|
|
reg-names = "crp_base", "ctrl_base", "cfg_base";
|
|
ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
|
|
interrupt-parent = <&intc3>;
|
|
interrupts = <0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-map-mask = <0 0 0 1>;
|
|
interrupt-map = <0 0 0 0 &pcie 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb0: usb@1b000000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x1b000000 0x1d8>;
|
|
|
|
interrupt-parent = <&intc3>;
|
|
interrupts = <1>;
|
|
|
|
resets = <&rst 5>;
|
|
reset-names = "usb-host";
|
|
|
|
has-transaction-translator;
|
|
caps-offset = <0x100>;
|
|
|
|
phy-names = "usb-phy0";
|
|
phys = <&usb_phy0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@1b400000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x1b400000 0x1d8>;
|
|
|
|
interrupt-parent = <&intc3>;
|
|
interrupts = <2>;
|
|
|
|
resets = <&rst2 5>;
|
|
reset-names = "usb-host";
|
|
|
|
has-transaction-translator;
|
|
caps-offset = <0x100>;
|
|
|
|
phy-names = "usb-phy1";
|
|
phys = <&usb_phy1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi: spi@1f000000 {
|
|
compatible = "qca,qca9560-spi", "qca,ar7100-spi";
|
|
reg = <0x1f000000 0x10>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "ahb";
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
usb_phy0: usb-phy {
|
|
compatible = "qca,qca9560-usb-phy", "qca,ar7200-usb-phy";
|
|
|
|
reset-names = "usb-phy", "usb-suspend-override";
|
|
resets = <&rst 4>, <&rst 3>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_phy1: usb-phy {
|
|
compatible = "qca,qca9560-usb-phy", "qca,ar7200-usb-phy";
|
|
|
|
reset-names = "usb-phy", "usb-suspend-override";
|
|
resets = <&rst2 4>, <&rst2 3>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
resets = <&rst 22>;
|
|
reset-names = "mdio";
|
|
};
|
|
|
|
ð0 {
|
|
compatible = "qca,qca9560-eth", "syscon";
|
|
|
|
pll-data = <0x03000000 0x00000101 0x00001919>;
|
|
pll-reg = <0 0x48 0>;
|
|
pll-handle = <&pll>;
|
|
|
|
resets = <&rst 9>;
|
|
reset-names = "mac";
|
|
};
|
|
|
|
&mdio1 {
|
|
status = "okay";
|
|
resets = <&rst 23>;
|
|
reset-names = "mdio";
|
|
builtin-switch;
|
|
|
|
builtin_switch: switch0@1f {
|
|
compatible = "qca,ar8229";
|
|
reg = <0x1f>;
|
|
resets = <&rst 8>;
|
|
reset-names = "switch";
|
|
phy-mode = "gmii";
|
|
qca,phy4-mii-enable;
|
|
qca,mib-poll-interval = <500>;
|
|
|
|
mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
swphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
phy-mode = "mii";
|
|
};
|
|
|
|
swphy4: ethernet-phy@4 {
|
|
reg = <4>;
|
|
phy-mode = "mii";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ð1 {
|
|
compatible = "qca,qca9560-eth", "syscon";
|
|
|
|
phy-mode = "gmii";
|
|
|
|
resets = <&rst 13>;
|
|
reset-names = "mac";
|
|
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|