mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
5eec1df01e
- add support for rtl8224 2.5Gbps PHY - add support for PHY LEDs on RTL8211F Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
152 lines
4.6 KiB
Diff
152 lines
4.6 KiB
Diff
From 17784801d888238571a0c4101b9ac4401fffeaa0 Mon Sep 17 00:00:00 2001
|
|
From: Marek Vasut <marex@denx.de>
|
|
Date: Tue, 25 Jun 2024 22:42:17 +0200
|
|
Subject: [PATCH] net: phy: realtek: Add support for PHY LEDs on RTL8211F
|
|
|
|
Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to
|
|
indicate link status and activity. Add minimal LED controller driver
|
|
supporting the most common uses with the 'netdev' trigger.
|
|
|
|
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/phy/realtek.c | 106 ++++++++++++++++++++++++++++++++++++++
|
|
1 file changed, 106 insertions(+)
|
|
|
|
--- a/drivers/net/phy/realtek.c
|
|
+++ b/drivers/net/phy/realtek.c
|
|
@@ -32,6 +32,15 @@
|
|
#define RTL8211F_PHYCR2 0x19
|
|
#define RTL8211F_INSR 0x1d
|
|
|
|
+#define RTL8211F_LEDCR 0x10
|
|
+#define RTL8211F_LEDCR_MODE BIT(15)
|
|
+#define RTL8211F_LEDCR_ACT_TXRX BIT(4)
|
|
+#define RTL8211F_LEDCR_LINK_1000 BIT(3)
|
|
+#define RTL8211F_LEDCR_LINK_100 BIT(1)
|
|
+#define RTL8211F_LEDCR_LINK_10 BIT(0)
|
|
+#define RTL8211F_LEDCR_MASK GENMASK(4, 0)
|
|
+#define RTL8211F_LEDCR_SHIFT 5
|
|
+
|
|
#define RTL8211F_TX_DELAY BIT(8)
|
|
#define RTL8211F_RX_DELAY BIT(3)
|
|
|
|
@@ -87,6 +96,8 @@
|
|
#define RTL_8221B_VN_CG 0x001cc84a
|
|
#define RTL_8251B 0x001cc862
|
|
|
|
+#define RTL8211F_LED_COUNT 3
|
|
+
|
|
MODULE_DESCRIPTION("Realtek PHY driver");
|
|
MODULE_AUTHOR("Johnson Leung");
|
|
MODULE_LICENSE("GPL");
|
|
@@ -476,6 +487,98 @@ static int rtl821x_resume(struct phy_dev
|
|
return 0;
|
|
}
|
|
|
|
+static int rtl8211f_led_hw_is_supported(struct phy_device *phydev, u8 index,
|
|
+ unsigned long rules)
|
|
+{
|
|
+ const unsigned long mask = BIT(TRIGGER_NETDEV_LINK_10) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_100) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_1000) |
|
|
+ BIT(TRIGGER_NETDEV_RX) |
|
|
+ BIT(TRIGGER_NETDEV_TX);
|
|
+
|
|
+ /* The RTL8211F PHY supports these LED settings on up to three LEDs:
|
|
+ * - Link: Configurable subset of 10/100/1000 link rates
|
|
+ * - Active: Blink on activity, RX or TX is not differentiated
|
|
+ * The Active option has two modes, A and B:
|
|
+ * - A: Link and Active indication at configurable, but matching,
|
|
+ * subset of 10/100/1000 link rates
|
|
+ * - B: Link indication at configurable subset of 10/100/1000 link
|
|
+ * rates and Active indication always at all three 10+100+1000
|
|
+ * link rates.
|
|
+ * This code currently uses mode B only.
|
|
+ */
|
|
+
|
|
+ if (index >= RTL8211F_LED_COUNT)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Filter out any other unsupported triggers. */
|
|
+ if (rules & ~mask)
|
|
+ return -EOPNOTSUPP;
|
|
+
|
|
+ /* RX and TX are not differentiated, either both are set or not set. */
|
|
+ if (!(rules & BIT(TRIGGER_NETDEV_RX)) ^ !(rules & BIT(TRIGGER_NETDEV_TX)))
|
|
+ return -EOPNOTSUPP;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int rtl8211f_led_hw_control_get(struct phy_device *phydev, u8 index,
|
|
+ unsigned long *rules)
|
|
+{
|
|
+ int val;
|
|
+
|
|
+ val = phy_read_paged(phydev, 0xd04, RTL8211F_LEDCR);
|
|
+ if (val < 0)
|
|
+ return val;
|
|
+
|
|
+ val >>= RTL8211F_LEDCR_SHIFT * index;
|
|
+ val &= RTL8211F_LEDCR_MASK;
|
|
+
|
|
+ if (val & RTL8211F_LEDCR_LINK_10)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_10, rules);
|
|
+
|
|
+ if (val & RTL8211F_LEDCR_LINK_100)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_100, rules);
|
|
+
|
|
+ if (val & RTL8211F_LEDCR_LINK_1000)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_1000, rules);
|
|
+
|
|
+ if (val & RTL8211F_LEDCR_ACT_TXRX) {
|
|
+ set_bit(TRIGGER_NETDEV_RX, rules);
|
|
+ set_bit(TRIGGER_NETDEV_TX, rules);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index,
|
|
+ unsigned long rules)
|
|
+{
|
|
+ const u16 mask = RTL8211F_LEDCR_MASK << (RTL8211F_LEDCR_SHIFT * index);
|
|
+ u16 reg = RTL8211F_LEDCR_MODE; /* Mode B */
|
|
+
|
|
+ if (index >= RTL8211F_LED_COUNT)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
|
|
+ reg |= RTL8211F_LEDCR_LINK_10;
|
|
+
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
|
|
+ reg |= RTL8211F_LEDCR_LINK_100;
|
|
+
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
|
|
+ reg |= RTL8211F_LEDCR_LINK_1000;
|
|
+
|
|
+ if (test_bit(TRIGGER_NETDEV_RX, &rules) ||
|
|
+ test_bit(TRIGGER_NETDEV_TX, &rules)) {
|
|
+ reg |= RTL8211F_LEDCR_ACT_TXRX;
|
|
+ }
|
|
+
|
|
+ reg <<= RTL8211F_LEDCR_SHIFT * index;
|
|
+
|
|
+ return phy_modify_paged(phydev, 0xd04, RTL8211F_LEDCR, mask, reg);
|
|
+}
|
|
+
|
|
static int rtl8211e_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret = 0, oldpage;
|
|
@@ -1192,6 +1295,9 @@ static struct phy_driver realtek_drvs[]
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
.flags = PHY_ALWAYS_CALL_SUSPEND,
|
|
+ .led_hw_is_supported = rtl8211f_led_hw_is_supported,
|
|
+ .led_hw_control_get = rtl8211f_led_hw_control_get,
|
|
+ .led_hw_control_set = rtl8211f_led_hw_control_set,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID),
|
|
.name = "RTL8211F-VD Gigabit Ethernet",
|