mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
121 lines
3.8 KiB
Diff
121 lines
3.8 KiB
Diff
From c19602f73386571bc9aed6059e2cce14f84eded4 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Mon, 7 Feb 2022 16:06:11 +0000
|
|
Subject: [PATCH] overlays: rpi-poe(-plus): Fix parameters
|
|
|
|
The support of PoE HATs is complicated because there are two methods to
|
|
control them - via the firmware, and directly over I2C - the choice
|
|
between the two methods depending on which side "owns" the i2c0 bus.
|
|
|
|
The firmware determines the ownership of i2c0 by analysing the Device
|
|
Tree after applying any dtoverlays and dtparams. For this reason the
|
|
PoE HAT overlays have recently been applied by the firmware _after_
|
|
config.txt has been processed, but this has prevented any user-supplied
|
|
threshold settings from being applied - either because the parameters
|
|
are unknown or because (after an explicit dtoverlay=rpi-poe) the
|
|
firmware's reload of the overlay has overwritten the user's settings.
|
|
|
|
Solve the problem by restructuring the rpi-poe overlays to support
|
|
a mode switch _after_ the overlay has been merged, thereby allowing
|
|
the overlays to be loaded _before_ config.txt is processed.
|
|
|
|
There is a companion firmware patch that changes the point at which
|
|
the overlays are loaded, and the parameter used to switch modes, but
|
|
the updated overlays are still compatible with older firmware, albeit
|
|
without working parameters.
|
|
|
|
See: https://github.com/raspberrypi/firmware/issues/1689
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 15 ++++++++++-----
|
|
.../boot/dts/overlays/rpi-poe-plus-overlay.dts | 15 +++++++++++++--
|
|
2 files changed, 23 insertions(+), 7 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts
|
|
@@ -67,7 +67,7 @@
|
|
|
|
fragment@2 {
|
|
target-path = "/__overrides__";
|
|
- __overlay__ {
|
|
+ params: __overlay__ {
|
|
poe_fan_temp0 = <&trip0>,"temperature:0";
|
|
poe_fan_temp0_hyst = <&trip0>,"hysteresis:0";
|
|
poe_fan_temp1 = <&trip1>,"temperature:0";
|
|
@@ -76,6 +76,9 @@
|
|
poe_fan_temp2_hyst = <&trip2>,"hysteresis:0";
|
|
poe_fan_temp3 = <&trip3>,"temperature:0";
|
|
poe_fan_temp3_hyst = <&trip3>,"hysteresis:0";
|
|
+ poe_fan_i2c = <&fwpwm>,"status=disabled",
|
|
+ <&poe_mfd>,"status=okay",
|
|
+ <&fan>,"pwms:0=",<&poe_mfd_pwm>;
|
|
};
|
|
};
|
|
|
|
@@ -91,15 +94,14 @@
|
|
|
|
fragment@4 {
|
|
target = <&i2c0>;
|
|
- __dormant__ {
|
|
+ i2c_bus: __overlay__ {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
- status = "okay";
|
|
|
|
poe_mfd: poe@51 {
|
|
compatible = "raspberrypi,poe-core";
|
|
reg = <0x51>;
|
|
- status = "okay";
|
|
+ status = "disabled";
|
|
|
|
poe_mfd_pwm: poe_pwm@f0 {
|
|
compatible = "raspberrypi,poe-pwm";
|
|
@@ -134,7 +136,10 @@
|
|
poe_fan_temp2_hyst = <&trip2>,"hysteresis:0";
|
|
poe_fan_temp3 = <&trip3>,"temperature:0";
|
|
poe_fan_temp3_hyst = <&trip3>,"hysteresis:0";
|
|
- i2c = <0>, "-3+4+5+6",
|
|
+ i2c = <0>, "+5+6",
|
|
+ <&fwpwm>,"status=disabled",
|
|
+ <&i2c_bus>,"status=okay",
|
|
+ <&poe_mfd>,"status=okay",
|
|
<&fan>,"pwms:0=",<&poe_mfd_pwm>;
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts
|
|
@@ -18,7 +18,7 @@
|
|
};
|
|
fragment@11 {
|
|
target = <&poe_mfd>;
|
|
- __dormant__ {
|
|
+ __overlay__ {
|
|
rpi-poe-power-supply@f2 {
|
|
compatible = "raspberrypi,rpi-poe-power-supply";
|
|
reg = <0xf2>;
|
|
@@ -28,7 +28,11 @@
|
|
};
|
|
|
|
__overrides__ {
|
|
- i2c = <0>, "-3+4+5+6-10+11",
|
|
+ i2c = <0>, "+5+6",
|
|
+ <&fwpwm>,"status=disabled",
|
|
+ <&rpi_poe_power_supply>,"status=disabled",
|
|
+ <&i2c_bus>,"status=okay",
|
|
+ <&poe_mfd>,"status=okay",
|
|
<&fan>,"pwms:0=",<&poe_mfd_pwm>;
|
|
};
|
|
};
|
|
@@ -36,3 +40,10 @@
|
|
&fan {
|
|
cooling-levels = <0 32 64 128 255>;
|
|
};
|
|
+
|
|
+¶ms {
|
|
+ poe_fan_i2c = <&fwpwm>,"status=disabled",
|
|
+ <&rpi_poe_power_supply>,"status=disabled",
|
|
+ <&poe_mfd>,"status=okay",
|
|
+ <&fan>,"pwms:0=",<&poe_mfd_pwm>;
|
|
+};
|