mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
a3042500ab
- ARV7525PW: use the power led as dsl led as done by the stock firmware - FRITZ3370: use the info led as internet led - FRITZ7320: use the power led as dsl led as done by the stock firmware Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48037
329 lines
7.0 KiB
Plaintext
329 lines
7.0 KiB
Plaintext
/include/ "vr9.dtsi"
|
|
|
|
/ {
|
|
|
|
model = "VGV7519 - KPN Experiabox V8";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
|
|
|
|
leds {
|
|
dsl = &broadband_yellow;
|
|
internet = &internet_yellow;
|
|
power = &power;
|
|
power2 = &power2;
|
|
wifi = &wireless_yellow;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
reg = <0x0 0x4000000>;
|
|
};
|
|
|
|
fpi@10000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "lantiq,fpi", "simple-bus";
|
|
ranges = <0x0 0x10000000 0xEEFFFFF>;
|
|
reg = <0x10000000 0xEF00000>;
|
|
|
|
localbus@0 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "lantiq,localbus", "simple-bus";
|
|
};
|
|
|
|
gpio: pinmux@E100B10 {
|
|
compatible = "lantiq,pinctrl-xr9";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
interrupt-parent = <&icu0>;
|
|
interrupts = <166 135 66 40 41 42 38>;
|
|
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0xE100B10 0xA0>;
|
|
|
|
state_default: pinmux {
|
|
stp {
|
|
lantiq,groups = "stp";
|
|
lantiq,function = "stp";
|
|
};
|
|
spi {
|
|
lantiq,groups = "spi";
|
|
lantiq,function = "spi";
|
|
};
|
|
mdio {
|
|
lantiq,groups = "mdio";
|
|
lantiq,function = "mdio";
|
|
};
|
|
gphy-leds_out {
|
|
lantiq,pins = "io7", "io44";
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
stp_out {
|
|
lantiq,pins = "io4", "io5", "io6";
|
|
lantiq,open-drain = <0>;
|
|
lantiq,output = <1>;
|
|
lantiq,pull = <0>;
|
|
};
|
|
pci-rst {
|
|
lantiq,pins = "io21";
|
|
lantiq,open-drain = <0>;
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
gphy-leds {
|
|
lantiq,groups = "gphy0 led1", "gphy1 led0";
|
|
lantiq,function = "gphy";
|
|
lantiq,open-drain = <0>;
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
eth@E108000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "lantiq,xrx200-net";
|
|
reg = < 0xE108000 0x3000 /* switch */
|
|
0xE10B100 0x70 /* mdio */
|
|
0xE10B1D8 0x30 /* mii */
|
|
0xE10B308 0x30 /* pmac */
|
|
>;
|
|
interrupt-parent = <&icu0>;
|
|
interrupts = <73 72>;
|
|
|
|
lan: interface@0 {
|
|
compatible = "lantiq,xrx200-pdi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
mac-address = [ 00 11 22 33 44 55 ];
|
|
|
|
ethernet@0 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <0>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
ethernet@1 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <1>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy1>;
|
|
};
|
|
ethernet@2 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <2>;
|
|
phy-mode = "gmii";
|
|
phy-handle = <&phy11>;
|
|
};
|
|
ethernet@4 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <4>;
|
|
phy-mode = "gmii";
|
|
phy-handle = <&phy13>;
|
|
};
|
|
};
|
|
|
|
wan: interface@1 {
|
|
compatible = "lantiq,xrx200-pdi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
mac-address = [ 00 11 22 33 44 56 ];
|
|
lantiq,wan;
|
|
ethernet@5 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <5>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy5>;
|
|
};
|
|
};
|
|
|
|
mdio@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "lantiq,xrx200-mdio";
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy5: ethernet-phy@5 {
|
|
reg = <0x5>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy11: ethernet-phy@11 {
|
|
reg = <0x11>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy13: ethernet-phy@13 {
|
|
reg = <0x13>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
stp: stp@E100BB0 {
|
|
compatible = "lantiq,gpio-stp-xway";
|
|
reg = <0xE100BB0 0x40>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
lantiq,shadow = <0xffff>;
|
|
lantiq,groups = <0x3>;
|
|
lantiq,dsl = <0x0>;
|
|
lantiq,phy1 = <0x0>;
|
|
lantiq,phy2 = <0x0>;
|
|
/* lantiq,rising; */
|
|
};
|
|
|
|
ifxhcd@E101000 {
|
|
status = "okay";
|
|
gpios = <&gpio 32 0>;
|
|
lantiq,portmask = <0x3>;
|
|
};
|
|
|
|
pci@E105400 {
|
|
status = "okay";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
compatible = "lantiq,pci-xway";
|
|
bus-range = <0x0 0x0>;
|
|
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
|
|
reg = <0x7000000 0x8000 /* config space */
|
|
0xE105400 0x400>; /* pci bridge */
|
|
lantiq,bus-clock = <33333333>;
|
|
/*lantiq,external-clock;*/
|
|
lantiq,delay-hi = <0>; /* 0ns delay */
|
|
lantiq,delay-lo = <0>; /* 0.0ns delay */
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
|
|
>;
|
|
gpio-reset = <&gpio 21 0>;
|
|
req-mask = <0x1>; /* GNT1 */
|
|
};
|
|
|
|
pcie@d900000 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gphy-xrx200 {
|
|
compatible = "lantiq,phy-xrx200";
|
|
firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
|
|
firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
|
|
phys = [ 00 01 ];
|
|
};
|
|
|
|
ralink_eep {
|
|
compatible = "ralink,eeprom";
|
|
ralink,eeprom = "RT2860.eeprom";
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <100>;
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 9 1>;
|
|
linux,code = <0x198>;
|
|
};
|
|
eco {
|
|
label = "eco";
|
|
gpios = <&gpio 41 1>;
|
|
linux,code = <247>;
|
|
};
|
|
rfkill {
|
|
label = "rfkill";
|
|
gpios = <&gpio 45 1>;
|
|
linux,code = <0xf7>;
|
|
};
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio 10 1>;
|
|
linux,code = <0x211>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
eco { /* blue */
|
|
label = "eco";
|
|
gpios = <&stp 2 1>;
|
|
};
|
|
wps_red { /* red */
|
|
label = "wps_red";
|
|
gpios = <&stp 3 1>;
|
|
};
|
|
wps_yellow { /* yellow */
|
|
label = "wps_yellow";
|
|
gpios = <&stp 4 1>;
|
|
};
|
|
upgrade { /* blue */
|
|
label = "upgrade";
|
|
gpios = <&stp 5 1>;
|
|
};
|
|
tv { /* yellow */
|
|
label = "tv";
|
|
gpios = <&stp 6 1>;
|
|
};
|
|
internet_yellow: internet_yellow { /* yellow */
|
|
label = "internet_yellow";
|
|
gpios = <&stp 7 1>;
|
|
};
|
|
internet_red { /* red */
|
|
label = "internet_red";
|
|
gpios = <&stp 8 1>;
|
|
};
|
|
broadband_red { /* red */
|
|
label = "broadband_red";
|
|
gpios = <&stp 9 1>;
|
|
};
|
|
broadband_yellow: broadband_yellow { /* yellow */
|
|
label = "broadband_yellow";
|
|
gpios = <&stp 10 1>;
|
|
};
|
|
voice { /* yellow */
|
|
label = "voice";
|
|
gpios = <&stp 11 1>;
|
|
};
|
|
wireless_red { /* red */
|
|
label = "wireless_red";
|
|
gpios = <&stp 12 1>;
|
|
};
|
|
wireless_yellow: wireless_yellow { /* yellow */
|
|
label = "wireless_yellow";
|
|
gpios = <&stp 13 1>;
|
|
};
|
|
power2: power2 { /* yellow */
|
|
label = "power2";
|
|
gpios = <&stp 14 1>;
|
|
};
|
|
power: power { /* red */
|
|
label = "power";
|
|
gpios = <&stp 15 1>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
};
|