openwrt/target/linux/lantiq/dts/FRITZ7320.dts
John Crispin a3042500ab lantiq: define default leds in dts files
- ARV7525PW: use the power led as dsl led as done by the stock firmware
- FRITZ3370: use the info led as internet led
- FRITZ7320: use the power led as dsl led as done by the stock firmware

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48037
2016-01-01 21:18:08 +00:00

146 lines
2.5 KiB
Plaintext

/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "FRITZ7320 - 1&1 HomeServer";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
dsl = &power;
internet = &online;
power = &power;
wifi = &wlan;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "urlader";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0xf60000>;
};
partition@f80000 {
label = "tffs (1)";
reg = <0xf80000 0x40000>;
read-only;
};
partition@fc0000 {
label = "tffs (2)";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci {
lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
lantiq,function = "pci";
};
pci-in {
lantiq,groups = "req1", "req2", "req3", "req4";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
lantiq,output = <1>;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mac-address = [ 00 11 22 33 44 55 ];
};
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
req-mask = <0xf>;
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 0>;
req-mask = <0xf>; /* GNT1 */
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 1 1>;
linux,code = <0xf7>;
};
dect {
label = "dect";
gpios = <&gpio 2 1>;
linux,code = <0x102>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpio 44 1>;
};
voice {
label = "voice";
gpios = <&gpio 47 1>;
};
dect {
label = "dect";
gpios = <&gpio 38 1>;
};
wlan: wlan {
label = "wlan";
gpios = <&gpio 37 1>;
};
online: online {
label = "online";
gpios = <&gpio 35 1>;
};
online2 {
label = "online2";
gpios = <&gpio 45 1>;
};
};
};