Kristian Skramstad d62648d58c qualcommax: ipq60xx: add support for Cambium Networks XE3-4 ... Cambium Networks XE3-4 is a tri-radio Wi-Fi 6/6E 4×4/2×2 AP. Hardware: Model: Cambium Networks XE3-4 CPU: IPQ6010/AP-CP01-C3, SoC Version: 1.0 @ 800 MHz Memory: 1 GiB Flash: 512 MiB Macronix MX30UF2G18AC + W25Q128FW Ethernet: 1x 1 GbE (QCA8072) 1x 2.5 GbE (QCA8081) Buttons: 1x Reset Serial: TX, RX, GND Baudrate: 115200 Radios: Qualcomm Atheros IPQ6018 802.11ax - 2x2 - 2GHz Qualcomm Atheros IPQ6018 802.11ax - 2x2 - 5GHz Qualcomm Atheros QCN9074 802.11ax - 4x4 - 5GHz or 6GHz BLE 4.1 Power: 32.0W 802.3bt5 PoE++ 25.5W 802.3at with USB, BT disabled Size: 215mm x 215mm Ports: 1x USB 2.0 Antenna: 6 GHz: 6.29 dBi, Omni 30 dBm 5 GHz: 6.12 dBi, Omni 31 dBm 2.4 GHz: 4.85 dBi, Omni 29 dBm LEDs: Multi-color status LEDs Mounting: Wall, ceiling or T-bar Installation: Serial connection 1. Open the AP to get access to the board. Connect RX, TX and GND. 2. Power on the AP, and short the CS pin of the SPI flash with one of the APs GND pins. 3. Transfer the initramfs image with TFTP (Default server IP is 192.168.0.120) # tftpboot factory.ubi 4. Flash the rootfs partition # flash rootfs 5. Reboot the AP # reset Signed-off-by: Kristian Skramstad <kristian+github@83.no> Link: https://github.com/openwrt/openwrt/pull/15633 Signed-off-by: Robert Marko <robimarko@gmail.com>		2024-08-08 22:57:22 +02:00
..
etc	qualcommax: ipq60xx: add support for Cambium Networks XE3-4	2024-08-08 22:57:22 +02:00
lib/upgrade	qualcommax: ipq60xx: add support for Cambium Networks XE3-4	2024-08-08 22:57:22 +02:00