ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 23:12:32 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
a2943e3795
openwrt/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch
Robert Marko b5f32064ed ipq807x: add Qualcomm Atheros IPQ807x target 
Qualcomm Atheros IPQ807x is a modern WiSoC featuring:
* Quad Core ARMv8 Cortex A-53
	* @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye
	* @ 1.4 GHz (IPQ8070A/1A) Codename Acorn
* Dual Band simultaneaous IEEE 802.11ax
	* 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A)
	* 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A)
	* 5G: 2x2/80MHz (IPQ8070A)
	* 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A)
	* 2G: 2x2/40MHz (IPQ8070A/1A)
* 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports)
* 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye
* 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn
* DDR3L/4 32/16 bit up to 2400MT/s
* SDIO 3.0/SD card 3.0/eMMC 5.1
* Dual USB 3.0
* One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane)
* Parallel NAND (ONFI)/LCD
* 6x QUP BLSP SPI/I2C/UART
* I2S, PCM, and TDMA
* HW PWM
* 1.8V configurable GPIO
* Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc)

Note that only v2 SOC models aka the ones ending with A suffix are
supported, v1 models do not comply to the final 802.11ax and have
lower clocks, lack the Gen3 PCIe etc.

SoC itself has two UBI32 cores for the NSS offloading system, however
currently no offloading is supported.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00

418 lines
14 KiB
Diff
Raw Blame History

From 231f6a9f24a5e9b6e7af801ca2377970474cdf59 Mon Sep 17 00:00:00 2001
From: Caleb Connolly <caleb.connolly@linaro.org>
Date: Fri, 29 Apr 2022 23:08:57 +0100
Subject: [PATCH] mfd: qcom-spmi-pmic: expose the PMIC revid information to
clients
Some PMIC functions such as the RRADC need to be aware of the PMIC
chip revision information to implement errata or otherwise adjust
behaviour, export the PMIC information to enable this.
This is specifically required to enable the RRADC to adjust
coefficients based on which chip fab the PMIC was produced in,
this can vary per unique device and therefore has to be read at
runtime.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/mfd/qcom-spmi-pmic.c | 265 ++++++++++++++++++++----------
include/soc/qcom/qcom-spmi-pmic.h | 60 +++++++
2 files changed, 235 insertions(+), 90 deletions(-)
create mode 100644 include/soc/qcom/qcom-spmi-pmic.h
--- a/drivers/mfd/qcom-spmi-pmic.c
+++ b/drivers/mfd/qcom-spmi-pmic.c
@@ -3,11 +3,16 @@
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
*/
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spmi.h>
+#include <linux/types.h>
#include <linux/regmap.h>
#include <linux/of_platform.h>
+#include <soc/qcom/qcom-spmi-pmic.h>
#define PMIC_REV2 0x101
#define PMIC_REV3 0x102
@@ -17,106 +22,140 @@
#define PMIC_TYPE_VALUE 0x51
-#define COMMON_SUBTYPE 0x00
-#define PM8941_SUBTYPE 0x01
-#define PM8841_SUBTYPE 0x02
-#define PM8019_SUBTYPE 0x03
-#define PM8226_SUBTYPE 0x04
-#define PM8110_SUBTYPE 0x05
-#define PMA8084_SUBTYPE 0x06
-#define PMI8962_SUBTYPE 0x07
-#define PMD9635_SUBTYPE 0x08
-#define PM8994_SUBTYPE 0x09
-#define PMI8994_SUBTYPE 0x0a
-#define PM8916_SUBTYPE 0x0b
-#define PM8004_SUBTYPE 0x0c
-#define PM8909_SUBTYPE 0x0d
-#define PM8028_SUBTYPE 0x0e
-#define PM8901_SUBTYPE 0x0f
-#define PM8950_SUBTYPE 0x10
-#define PMI8950_SUBTYPE 0x11
-#define PM8998_SUBTYPE 0x14
-#define PMI8998_SUBTYPE 0x15
-#define PM8005_SUBTYPE 0x18
-#define PM660L_SUBTYPE 0x1A
-#define PM660_SUBTYPE 0x1B
-#define PM8150_SUBTYPE 0x1E
-#define PM8150L_SUBTYPE 0x1f
-#define PM8150B_SUBTYPE 0x20
-#define PMK8002_SUBTYPE 0x21
-#define PM8009_SUBTYPE 0x24
-#define PM8150C_SUBTYPE 0x26
-#define SMB2351_SUBTYPE 0x29
+#define PMIC_REV4_V2 0x02
+
+struct qcom_spmi_dev {
+ int num_usids;
+ struct qcom_spmi_pmic pmic;
+};
+
+#define N_USIDS(n) ((void *)n)
static const struct of_device_id pmic_spmi_id_table[] = {
- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE },
- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE },
- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE },
- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE },
- { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE },
- { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE },
- { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE },
- { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE },
- { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE },
- { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE },
- { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE },
- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE },
- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE },
- { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE },
- { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE },
- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE },
- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE },
- { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE },
- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE },
- { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE },
- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE },
- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE },
- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE },
- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE },
- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE },
- { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE },
- { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE },
- { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE },
- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
+ { .compatible = "qcom,pm660", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm660l", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8004", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8005", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8019", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8028", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8110", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8150", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8150b", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8150c", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8150l", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8226", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8841", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8901", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8909", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8916", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8941", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8950", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8994", .data = N_USIDS(2) },
+ { .compatible = "qcom,pm8998", .data = N_USIDS(2) },
+ { .compatible = "qcom,pma8084", .data = N_USIDS(2) },
+ { .compatible = "qcom,pmd9635", .data = N_USIDS(2) },
+ { .compatible = "qcom,pmi8950", .data = N_USIDS(2) },
+ { .compatible = "qcom,pmi8962", .data = N_USIDS(2) },
+ { .compatible = "qcom,pmi8994", .data = N_USIDS(2) },
+ { .compatible = "qcom,pmi8998", .data = N_USIDS(2) },
+ { .compatible = "qcom,pmk8002", .data = N_USIDS(2) },
+ { .compatible = "qcom,smb2351", .data = N_USIDS(2) },
+ { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) },
{ }
};
-static void pmic_spmi_show_revid(struct regmap *map, struct device *dev)
+/*
+ * A PMIC can be represented by multiple SPMI devices, but
+ * only the base PMIC device will contain a reference to
+ * the revision information.
+ *
+ * This function takes a pointer to a pmic device and
+ * returns a pointer to the base PMIC device.
+ *
+ * This only supports PMICs with 1 or 2 USIDs.
+ */
+static struct spmi_device *qcom_pmic_get_base_usid(struct device *dev)
{
- unsigned int rev2, minor, major, type, subtype;
- const char *name = "unknown";
- int ret, i;
+ struct spmi_device *sdev;
+ struct qcom_spmi_dev *ctx;
+ struct device_node *spmi_bus;
+ struct device_node *other_usid = NULL;
+ int function_parent_usid, ret;
+ u32 pmic_addr;
- ret = regmap_read(map, PMIC_TYPE, &type);
- if (ret < 0)
- return;
+ sdev = to_spmi_device(dev);
+ ctx = dev_get_drvdata(&sdev->dev);
- if (type != PMIC_TYPE_VALUE)
- return;
+ /*
+ * Quick return if the function device is already in the base
+ * USID. This will always be hit for PMICs with only 1 USID.
+ */
+ if (sdev->usid % ctx->num_usids == 0)
+ return sdev;
- ret = regmap_read(map, PMIC_SUBTYPE, &subtype);
+ function_parent_usid = sdev->usid;
+
+ /*
+ * Walk through the list of PMICs until we find the sibling USID.
+ * The goal is to find the first USID which is less than the
+ * number of USIDs in the PMIC array, e.g. for a PMIC with 2 USIDs
+ * where the function device is under USID 3, we want to find the
+ * device for USID 2.
+ */
+ spmi_bus = of_get_parent(sdev->dev.of_node);
+ do {
+ other_usid = of_get_next_child(spmi_bus, other_usid);
+
+ ret = of_property_read_u32_index(other_usid, "reg", 0, &pmic_addr);
+ if (ret)
+ return ERR_PTR(ret);
+
+ sdev = spmi_device_from_of(other_usid);
+ if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) {
+ if (!sdev)
+ /*
+ * If the base USID for this PMIC hasn't probed yet
+ * but the secondary USID has, then we need to defer
+ * the function driver so that it will attempt to
+ * probe again when the base USID is ready.
+ */
+ return ERR_PTR(-EPROBE_DEFER);
+ return sdev;
+ }
+ } while (other_usid->sibling);
+
+ return ERR_PTR(-ENODATA);
+}
+
+static int pmic_spmi_load_revid(struct regmap *map, struct device *dev,
+ struct qcom_spmi_pmic *pmic)
+{
+ int ret;
+
+ ret = regmap_read(map, PMIC_TYPE, &pmic->type);
if (ret < 0)
- return;
+ return ret;
- for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) {
- if (subtype == (unsigned long)pmic_spmi_id_table[i].data)
- break;
- }
+ if (pmic->type != PMIC_TYPE_VALUE)
+ return ret;
- if (i != ARRAY_SIZE(pmic_spmi_id_table))
- name = pmic_spmi_id_table[i].compatible;
+ ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype);
+ if (ret < 0)
+ return ret;
- ret = regmap_read(map, PMIC_REV2, &rev2);
+ pmic->name = of_match_device(pmic_spmi_id_table, dev)->compatible;
+
+ ret = regmap_read(map, PMIC_REV2, &pmic->rev2);
if (ret < 0)
- return;
+ return ret;
- ret = regmap_read(map, PMIC_REV3, &minor);
+ ret = regmap_read(map, PMIC_REV3, &pmic->minor);
if (ret < 0)
- return;
+ return ret;
- ret = regmap_read(map, PMIC_REV4, &major);
+ ret = regmap_read(map, PMIC_REV4, &pmic->major);
if (ret < 0)
- return;
+ return ret;
/*
* In early versions of PM8941 and PM8226, the major revision number
@@ -124,15 +163,49 @@ static void pmic_spmi_show_revid(struct
* Increment the major revision number here if the chip is an early
* version of PM8941 or PM8226.
*/
- if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) &&
- major < 0x02)
- major++;
+ if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) &&
+ pmic->major < PMIC_REV4_V2)
+ pmic->major++;
+
+ if (pmic->subtype == PM8110_SUBTYPE)
+ pmic->minor = pmic->rev2;
+
+ dev_dbg(dev, "%x: %s v%d.%d\n",
+ pmic->subtype, pmic->name, pmic->major, pmic->minor);
+
+ return 0;
+}
+
+/**
+ * qcom_pmic_get() - Get a pointer to the base PMIC device
+ *
+ * This function takes a struct device for a driver which is a child of a PMIC.
+ * And locates the PMIC revision information for it.
+ *
+ * @dev: the pmic function device
+ * @return: the struct qcom_spmi_pmic* pointer associated with the function device
+ */
+const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev)
+{
+ struct spmi_device *sdev;
+ struct qcom_spmi_dev *spmi;
+
+ /*
+ * Make sure the device is actually a child of a PMIC
+ */
+ if (!of_match_device(pmic_spmi_id_table, dev->parent))
+ return ERR_PTR(-EINVAL);
+
+ sdev = qcom_pmic_get_base_usid(dev->parent);
- if (subtype == PM8110_SUBTYPE)
- minor = rev2;
+ if (IS_ERR(sdev))
+ return ERR_CAST(sdev);
- dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor);
+ spmi = dev_get_drvdata(&sdev->dev);
+
+ return &spmi->pmic;
}
+EXPORT_SYMBOL(qcom_pmic_get);
static const struct regmap_config spmi_regmap_config = {
.reg_bits = 16,
@@ -144,14 +217,26 @@ static const struct regmap_config spmi_r
static int pmic_spmi_probe(struct spmi_device *sdev)
{
struct regmap *regmap;
+ struct qcom_spmi_dev *ctx;
+ int ret;
regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
+ ctx = devm_kzalloc(&sdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->num_usids = (uintptr_t)of_device_get_match_data(&sdev->dev);
+
/* Only the first slave id for a PMIC contains this information */
- if (sdev->usid % 2 == 0)
- pmic_spmi_show_revid(regmap, &sdev->dev);
+ if (sdev->usid % ctx->num_usids == 0) {
+ ret = pmic_spmi_load_revid(regmap, &sdev->dev, &ctx->pmic);
+ if (ret < 0)
+ return ret;
+ }
+ spmi_device_set_drvdata(sdev, ctx);
return devm_of_platform_populate(&sdev->dev);
}
--- /dev/null
+++ b/include/soc/qcom/qcom-spmi-pmic.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2022 Linaro. All rights reserved.
+ * Author: Caleb Connolly <caleb.connolly@linaro.org>
+ */
+
+#ifndef __QCOM_SPMI_PMIC_H__
+#define __QCOM_SPMI_PMIC_H__
+
+#include <linux/device.h>
+
+#define COMMON_SUBTYPE 0x00
+#define PM8941_SUBTYPE 0x01
+#define PM8841_SUBTYPE 0x02
+#define PM8019_SUBTYPE 0x03
+#define PM8226_SUBTYPE 0x04
+#define PM8110_SUBTYPE 0x05
+#define PMA8084_SUBTYPE 0x06
+#define PMI8962_SUBTYPE 0x07
+#define PMD9635_SUBTYPE 0x08
+#define PM8994_SUBTYPE 0x09
+#define PMI8994_SUBTYPE 0x0a
+#define PM8916_SUBTYPE 0x0b
+#define PM8004_SUBTYPE 0x0c
+#define PM8909_SUBTYPE 0x0d
+#define PM8028_SUBTYPE 0x0e
+#define PM8901_SUBTYPE 0x0f
+#define PM8950_SUBTYPE 0x10
+#define PMI8950_SUBTYPE 0x11
+#define PM8998_SUBTYPE 0x14
+#define PMI8998_SUBTYPE 0x15
+#define PM8005_SUBTYPE 0x18
+#define PM660L_SUBTYPE 0x1A
+#define PM660_SUBTYPE 0x1B
+#define PM8150_SUBTYPE 0x1E
+#define PM8150L_SUBTYPE 0x1f
+#define PM8150B_SUBTYPE 0x20
+#define PMK8002_SUBTYPE 0x21
+#define PM8009_SUBTYPE 0x24
+#define PM8150C_SUBTYPE 0x26
+#define SMB2351_SUBTYPE 0x29
+
+#define PMI8998_FAB_ID_SMIC 0x11
+#define PMI8998_FAB_ID_GF 0x30
+
+#define PM660_FAB_ID_GF 0x0
+#define PM660_FAB_ID_TSMC 0x2
+#define PM660_FAB_ID_MX 0x3
+
+struct qcom_spmi_pmic {
+ unsigned int type;
+ unsigned int subtype;
+ unsigned int major;
+ unsigned int minor;
+ unsigned int rev2;
+ const char *name;
+};
+
+const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev);
+
+#endif /* __QCOM_SPMI_PMIC_H__ */
Reference in New Issue View Git Blame Copy Permalink