mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
2eef4f7354
The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
261 lines
7.0 KiB
Diff
261 lines
7.0 KiB
Diff
From a1490c1e8a12a8286c6a34c3d277a519066fc51e Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Sat, 7 Oct 2023 14:32:40 +0200
|
|
Subject: [PATCH] ARM: dts: ixp4xx: Add USRobotics USR8200 device tree
|
|
|
|
This is a USRobotics NAS/Firewall/router that has been supported
|
|
by OpenWrt in the past. It had dedicated users so let's get it
|
|
properly supported.
|
|
|
|
Some debugging and fixing was provided by Howard Harte.
|
|
|
|
Link: https://lore.kernel.org/r/20231007-ixp4xx-usr8200-v1-1-aded3d6ff6f1@linaro.org
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
---
|
|
arch/arm/boot/dts/intel/ixp/Makefile | 3 +-
|
|
.../ixp/intel-ixp42x-usrobotics-usr8200.dts | 229 ++++++++++++++++++
|
|
2 files changed, 231 insertions(+), 1 deletion(-)
|
|
create mode 100644 arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
|
|
|
|
--- a/arch/arm/boot/dts/intel/ixp/Makefile
|
|
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
|
|
@@ -16,4 +16,5 @@ dtb-$(CONFIG_ARCH_IXP4XX) += \
|
|
intel-ixp43x-gateworks-gw2358.dtb \
|
|
intel-ixp42x-netgear-wg302v1.dtb \
|
|
intel-ixp42x-arcom-vulcan.dtb \
|
|
- intel-ixp42x-gateway-7001.dtb
|
|
+ intel-ixp42x-gateway-7001.dtb \
|
|
+ intel-ixp42x-usrobotics-usr8200.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
|
|
@@ -0,0 +1,229 @@
|
|
+// SPDX-License-Identifier: ISC
|
|
+/*
|
|
+ * Device Tree file for the USRobotics USR8200 firewall
|
|
+ * VPN and NAS. Based on know-how from Peter Denison.
|
|
+ *
|
|
+ * This machine is based on IXP422, the USR internal codename
|
|
+ * is "Jeeves".
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "intel-ixp42x.dtsi"
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+/ {
|
|
+ model = "USRobotics USR8200";
|
|
+ compatible = "usr,usr8200", "intel,ixp42x";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ memory@0 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x4000000>;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200n8";
|
|
+ stdout-path = "uart1:115200n8";
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ /* These are switched around */
|
|
+ serial0 = &uart1;
|
|
+ serial1 = &uart0;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+ ieee1394_led: led-1394 {
|
|
+ label = "usr8200:green:1394";
|
|
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
|
+ default-state = "off";
|
|
+ };
|
|
+ usb1_led: led-usb1 {
|
|
+ label = "usr8200:green:usb1";
|
|
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
|
|
+ default-state = "off";
|
|
+ };
|
|
+ usb2_led: led-usb2 {
|
|
+ label = "usr8200:green:usb2";
|
|
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
|
+ default-state = "off";
|
|
+ };
|
|
+ wireless_led: led-wireless {
|
|
+ /*
|
|
+ * This LED is mounted inside the case but cannot be
|
|
+ * seen from the outside: probably USR planned at one
|
|
+ * point for the device to have a wireless card, then
|
|
+ * changed their mind and didn't mount it, leaving the
|
|
+ * LED in place.
|
|
+ */
|
|
+ label = "usr8200:green:wireless";
|
|
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
+ default-state = "off";
|
|
+ };
|
|
+ pwr_led: led-pwr {
|
|
+ label = "usr8200:green:pwr";
|
|
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
|
+ default-state = "on";
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio_keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ button-reset {
|
|
+ wakeup-source;
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ label = "reset";
|
|
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ bus@c4000000 {
|
|
+ flash@0,0 {
|
|
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
|
|
+ bank-width = <2>;
|
|
+ /* Enable writes on the expansion bus */
|
|
+ intel,ixp4xx-eb-write-enable = <1>;
|
|
+ /* 16 MB of Flash mapped in at CS0 */
|
|
+ reg = <0 0x00000000 0x1000000>;
|
|
+
|
|
+ partitions {
|
|
+ compatible = "redboot-fis";
|
|
+ /* Eraseblock at 0x0fe0000 */
|
|
+ fis-index-block = <0x7f>;
|
|
+ };
|
|
+ };
|
|
+ rtc@2,0 {
|
|
+ /* EPSON RTC7301 DG DIL-capsule */
|
|
+ compatible = "epson,rtc7301dg";
|
|
+ /*
|
|
+ * These timing settings were found in the boardfile patch:
|
|
+ * IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
|
|
+ * IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
|
|
+ */
|
|
+ intel,ixp4xx-eb-t1 = <0>; // no cycles extra address phase
|
|
+ intel,ixp4xx-eb-t2 = <0>; // no cycles extra setup phase
|
|
+ intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
|
|
+ intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
|
|
+ intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
|
|
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle
|
|
+ intel,ixp4xx-eb-byte-access-on-halfword = <0>;
|
|
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
|
|
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
|
|
+ intel,ixp4xx-eb-write-enable = <1>;
|
|
+ intel,ixp4xx-eb-byte-access = <1>;
|
|
+ /* 512 bytes at CS2 */
|
|
+ reg = <2 0x00000000 0x0000200>;
|
|
+ reg-io-width = <1>;
|
|
+ native-endian;
|
|
+ /* FIXME: try to check if there is an IRQ for the RTC? */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pci@c0000000 {
|
|
+ status = "okay";
|
|
+
|
|
+ /*
|
|
+ * Taken from USR8200 boardfile from OpenWrt
|
|
+ *
|
|
+ * We have 3 slots (IDSEL) with partly swizzled IRQs on slot 16.
|
|
+ * We assume the same IRQ for all pins on the remaining slots, that
|
|
+ * is what the boardfile was doing.
|
|
+ */
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0xf800 0 0 7>;
|
|
+ interrupt-map =
|
|
+ /* IDSEL 14 used for "Wireless" in the board file */
|
|
+ <0x7000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
|
|
+ /* IDSEL 15 used for VIA VT6307 IEEE 1394 Firewire */
|
|
+ <0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 8 */
|
|
+ /* IDSEL 16 used for VIA VT6202 USB 2.0 4+1 */
|
|
+ <0x8000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 16 is irq 11 */
|
|
+ <0x8000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 16 is irq 10 */
|
|
+ <0x8000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 16 is irq 9 */
|
|
+ };
|
|
+
|
|
+ gpio@c8004000 {
|
|
+ /* Enable clock out on GPIO 15 */
|
|
+ intel,ixp4xx-gpio15-clkout;
|
|
+ };
|
|
+
|
|
+ /* EthB WAN */
|
|
+ ethernet@c8009000 {
|
|
+ status = "okay";
|
|
+ queue-rx = <&qmgr 3>;
|
|
+ queue-txready = <&qmgr 20>;
|
|
+ phy-mode = "rgmii";
|
|
+ phy-handle = <&phy9>;
|
|
+
|
|
+ mdio {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ phy9: ethernet-phy@9 {
|
|
+ reg = <9>;
|
|
+ };
|
|
+
|
|
+ /* The switch uses MDIO addresses 16 thru 31 */
|
|
+ switch@16 {
|
|
+ compatible = "marvell,mv88e6060";
|
|
+ reg = <16>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ label = "lan1";
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan2";
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan3";
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "lan4";
|
|
+ };
|
|
+
|
|
+ port@5 {
|
|
+ /* Port 5 is the CPU port according to the MV88E6060 datasheet */
|
|
+ reg = <5>;
|
|
+ phy-mode = "rgmii-id";
|
|
+ ethernet = <ðc>;
|
|
+ label = "cpu";
|
|
+ fixed-link {
|
|
+ speed = <100>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* EthC LAN connected to the Marvell DSA Switch */
|
|
+ ethc: ethernet@c800a000 {
|
|
+ status = "okay";
|
|
+ queue-rx = <&qmgr 4>;
|
|
+ queue-txready = <&qmgr 21>;
|
|
+ phy-mode = "rgmii";
|
|
+ fixed-link {
|
|
+ speed = <100>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|