mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
971f31bedc
"There are often transient line events when the system is powered up and initialized and it is often necessary for the gpio_chip driver to clear any interrupt flags in hardware before setting up the gpio chip, especially the irqchip portions of it." <http://lists.infradead.org/pipermail/openwrt-devel/2019-June/017630.html> This patch adds a fix for the APM821XX's interrupt controller to clear any bogus pending toggled interrupts that happens on various APM821XX boards on boot. The patch also changes the debouce-interval from the default 5ms debounce interval to 60ms all around. The default setting caused on occasions that the button state became stuck in a pressed state, even though the button was released. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
221 lines
3.6 KiB
Plaintext
221 lines
3.6 KiB
Plaintext
/*
|
|
* Device Tree Source for Netgear WNDAP620 and WNDAP660
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include "apm82181.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &UART0;
|
|
led-boot = &status;
|
|
led-failsafe = &failsafe;
|
|
led-running = &status;
|
|
led-upgrade = &status;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "/plb/opb/serial@ef600300";
|
|
};
|
|
};
|
|
|
|
&CRYPTO {
|
|
status = "okay";
|
|
};
|
|
|
|
&PKA {
|
|
status = "okay";
|
|
};
|
|
|
|
&TRNG {
|
|
status = "okay";
|
|
};
|
|
|
|
&EBC0 {
|
|
ndfc@1,0 {
|
|
status = "okay";
|
|
/* 32 MiB SLC NAND Flash */
|
|
nand {
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x00000000 0x00100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "u-boot-env";
|
|
reg = <0x00100000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@110000,0 {
|
|
label = "firmware";
|
|
reg = <0x00110000 0x01ac0000>;
|
|
};
|
|
|
|
partition@110000,1 {
|
|
/*
|
|
* The u-boot bootloader will look at this
|
|
* offset (0x110000) for an uImage binary.
|
|
*/
|
|
label = "kernel";
|
|
reg = <0x00110000 0x003f0000>;
|
|
};
|
|
|
|
partition@500000 {
|
|
label = "ubi";
|
|
reg = <0x00500000 0x016d0000>;
|
|
};
|
|
|
|
partition@1bd0000 {
|
|
/*
|
|
* original vendor device-tree - do not use or
|
|
* overwrite. The original u-boot also supports
|
|
* the gzipped legacy monolithic/Multi-File Image
|
|
* format, which is a better choice.
|
|
*/
|
|
label = "device-tree";
|
|
reg = <0x01bd0000 0x0010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1be0000 {
|
|
label = "var";
|
|
reg = <0x01be0000 0x0400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1fe0000 {
|
|
label = "manudata";
|
|
reg = <0x01fe0000 0x20000 >;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&UART0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&GPIO0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&EMAC0 {
|
|
status = "okay";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
pause;
|
|
asym-pause;
|
|
};
|
|
|
|
mdio0: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&POB0 {
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "Reset Button";
|
|
gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|
|
|
|
LEDS: leds {
|
|
compatible = "gpio-leds";
|
|
|
|
status: power {
|
|
label = "wndap6x0:green:power";
|
|
gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
failsafe: test {
|
|
label = "wndap6x0:amber:test";
|
|
gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
|
|
panic-indicator;
|
|
};
|
|
|
|
activity {
|
|
label = "wndap6x0:green:activity";
|
|
gpios = <&GPIO0 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan2g {
|
|
label = "wndap6x0:green:wlan2g";
|
|
gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan5g {
|
|
label = "wndap6x0:green:wlan5g";
|
|
gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
gpio-export {
|
|
compatible = "gpio-export";
|
|
|
|
internal-antenna {
|
|
gpio-export,name = "wndap6x0:internal-antenna";
|
|
gpio-export,output = <1>;
|
|
gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
external-antenna {
|
|
gpio-export,name = "wndap6x0:external-antenna";
|
|
gpio-export,output = <0>;
|
|
gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
mains-powered {
|
|
/*
|
|
* Input pin describing what powers the AP
|
|
* 0/Low = PoE
|
|
* 1/High = 12v mains powered
|
|
*/
|
|
gpio-export,name = "wndap620:mains-powered";
|
|
gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
rtl8367b {
|
|
compatible = "realtek,rtl8367b";
|
|
cpu_port = <5>;
|
|
realtek,extif0 = <1 2 1 1 1 1 1 1 2>;
|
|
mii-bus = <&mdio0>;
|
|
};
|
|
};
|
|
|
|
&PCIE0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&MSI {
|
|
status = "okay";
|
|
};
|
|
|
|
&IIC0 {
|
|
status = "okay";
|
|
|
|
at24@52 {
|
|
compatible = "atmel,24c04";
|
|
reg = <0x52>;
|
|
pagesize = <16>;
|
|
read-only;
|
|
};
|
|
};
|
|
|