openwrt/target/linux/bcm27xx/patches-6.6/950-0133-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

47 lines
1.6 KiB
Diff

From ceaf767bea165e6d36421371ada1f2cc6106a934 Mon Sep 17 00:00:00 2001
From: Joshua Emele <jemele@acm.org>
Date: Wed, 7 Nov 2018 16:07:40 -0800
Subject: [PATCH 0133/1085] lan78xx: Debounce link events to minimize poll
storm
The bInterval is set to 4 (i.e. 8 microframes => 1ms) and the only bit
that the driver pays attention to is "link was reset". If there's a
flapping status bit in that endpoint data, (such as if PHY negotiation
needs a few tries to get a stable link) then polling at a slower rate
would act as a de-bounce.
See: https://github.com/raspberrypi/linux/issues/2447
---
drivers/net/usb/lan78xx.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -618,6 +618,11 @@ static bool enable_tso;
module_param(enable_tso, bool, 0644);
MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload");
+#define INT_URB_MICROFRAMES_PER_MS 8
+static int int_urb_interval_ms = 8;
+module_param(int_urb_interval_ms, int, 0);
+MODULE_PARM_DESC(int_urb_interval_ms, "Override usb interrupt urb interval");
+
static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
{
u32 *buf;
@@ -4455,7 +4460,13 @@ static int lan78xx_probe(struct usb_inte
if (ret < 0)
goto out4;
- period = ep_intr->desc.bInterval;
+ if (int_urb_interval_ms <= 0)
+ period = ep_intr->desc.bInterval;
+ else
+ period = int_urb_interval_ms * INT_URB_MICROFRAMES_PER_MS;
+
+ netif_notice(dev, probe, netdev, "int urb period %d\n", period);
+
maxp = usb_maxpacket(dev->udev, dev->pipe_intr);
buf = kmalloc(maxp, GFP_KERNEL);
if (!buf) {