ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
a200f0cee7
openwrt/target/linux/bcm27xx/patches-6.6/950-0092-MMC-added-alternative-MMC-driver.patch
Christian Marangi f9a70a20c5
generic: backport BLOCK OF support patch 
Backport BLOCK OF support patch merged upstream and refresh pending
BLOCK patches.

This is a new way to declare partition table for BLOCK device (eMMC
currently supported) with the use of DTS.

Current pending patch are adapted to not cause regression with current
downstream implementation of a similar functionality.

Also enable the new OF_PARTITION config by default.

Link: https://github.com/openwrt/openwrt/pull/16663
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-11 17:18:40 +02:00

2024 lines
55 KiB
Diff
Raw Blame History

From c75d96f4d9fe73fbacb0b927ed9e4f59caa668e7 Mon Sep 17 00:00:00 2001
From: gellert <gellert@raspberrypi.org>
Date: Fri, 15 Aug 2014 16:35:06 +0100
Subject: [PATCH 0092/1085] MMC: added alternative MMC driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
mmc: Disable CMD23 transfers on all cards
Pending wire-level investigation of these types of transfers
and associated errors on bcm2835-mmc, disable for now. Fallback of
CMD18/CMD25 transfers will be used automatically by the MMC layer.
Reported/Tested-by: Gellert Weisz <gellert@raspberrypi.org>
mmc: bcm2835-mmc: enable DT support for all architectures
Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now.
Enable Device Tree support for all architectures.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
mmc: bcm2835-mmc: fix probe error handling
Probe error handling is broken in several places.
Simplify error handling by using device managed functions.
Replace pr_{err,info} with dev_{err,info}.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2835-mmc: Add locks when accessing sdhost registers
bcm2835-mmc: Add range of debug options for slowing things down
bcm2835-mmc: Add option to disable some delays
bcm2835-mmc: Add option to disable MMC_QUIRK_BLK_NO_CMD23
bcm2835-mmc: Default to disabling MMC_QUIRK_BLK_NO_CMD23
bcm2835-mmc: Adding overclocking option
Allow a different clock speed to be substitued for a requested 50MHz.
This option is exposed using the "overclock_50" DT parameter.
Note that the mmc interface is restricted to EVEN integer divisions of
250MHz, and the highest sensible option is 63 (250/4 = 62.5), the
next being 125 (250/2) which is much too high.
Use at your own risk.
bcm2835-mmc: Round up the overclock, so 62 works for 62.5Mhz
Also only warn once for each overclock setting.
mmc: bcm2835-mmc: Make available on ARCH_BCM2835
Make the bcm2835-mmc driver available for use on ARCH_BCM2835.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
BCM270x_DT: add bcm2835-mmc entry
Add Device Tree entry for bcm2835-mmc.
In non-DT mode, don't add the device in the board file.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2835-mmc: Don't overwrite MMC capabilities from DT
bcm2835-mmc: Don't override bus width capabilities from devicetree
Take out the force setting of the MMC_CAP_4_BIT_DATA host capability
so that the result read from devicetree via mmc_of_parse() is
preserved.
bcm2835-mmc: Only claim one DMA channel
With both MMC controllers enabled there are few DMA channels left. The
bcm2835-mmc driver only uses DMA in one direction at a time, so it
doesn't need to claim two channels.
See: https://github.com/raspberrypi/linux/issues/1327
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-mmc: New timer API
mmc: bcm2835-mmc: Support underclocking
Support underclocking of the SD bus using the max-frequency DT property
(which currently has no DT parameter). The sd_overclock parameter
already provides another way to achieve the same thing which should be
equivalent in end result, but it is a bug not to support max-frequency
as well.
See: https://github.com/raspberrypi/linux/issues/2350
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
mmc/bcm2835: Recover from MMC_SEND_EXT_CSD
If the user issues an "mmc extcsd read", the SD controller receives
what it thinks is a SEND_IF_COND command with an unexpected data block.
The resulting operations leave the FSM stuck in READWAIT, a state which
persists until the MMC framework resets the controller, by which point
the root filesystem is likely to have been unmounted.
A less heavyweight solution is to detect the condition and nudge the
FSM by asserting the (self-clearing) FORCE_DATA_MODE bit.
N.B. This workaround was essentially discovered by accident and without
a full understanding the inner workings of the controller, so it is
fortunate that the "fix" only modifies error paths.
See: https://github.com/raspberrypi/linux/issues/2728
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-mmc: Fix DMA channel leak
The BCM2835 MMC host driver requests a DMA channel on probe but neglects
to release the channel in the probe error path and on driver unbind.
I'm seeing this happen on every boot of the Compute Module 3: On first
driver probe, DMA channel 2 is allocated and then leaked with a "could
not get clk, deferring probe" message. On second driver probe, channel 4
is allocated.
Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Fix struct mmc_host leak on probe
The BCM2835 MMC host driver requests the bus address of the host's
register map on probe. If that fails, the driver leaks the struct
mmc_host allocated earlier.
Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Fix duplicate free_irq() on remove
The BCM2835 MMC host driver requests its interrupt as a device-managed
resource, so the interrupt is automatically freed after the driver is
unbound.
However on driver unbind, bcm2835_mmc_remove() frees the interrupt
explicitly to avoid invocation of the interrupt handler after driver
structures have been torn down.
The interrupt is thus freed twice, leading to a WARN splat in
__free_irq(). Fix by not requesting the interrupt as a device-managed
resource.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Handle mmc_add_host() errors
The BCM2835 MMC host driver calls mmc_add_host() but doesn't check its
return value. Errors occurring in that function are therefore not
handled. Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Deduplicate reset of driver data on remove
The BCM2835 MMC host driver sets the device's driver data pointer to
NULL on ->remove() even though the driver core subsequently does the
same in __device_release_driver(). Drop the duplicate assignment.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835_mmc: Remove vestigial threaded IRQ
With SDIO processing now managed by the MMC framework with a
workqueue, the bcm2835_mmc driver no longer needs a threaded
IRQ.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Add missing dma_unmap_sg calls to free relevant swiotlb bounce buffers.
This prevents DMA leaks.
Signed-off-by: Yaroslav Rosomakho <yaroslavros@gmail.com>
Limit max_req_size under arm64 (or any other platform that uses swiotlb) to prevent potential buffer overflow due to bouncing.
Signed-off-by: Yaroslav Rosomakho <yaroslavros@gmail.com>
mmc: sdhci: Silence MMC warnings
When the MMC isn't plugged in, the driver will spam the console which is
pretty annoying when using NFS.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
mmc: sdhci-iproc: Fix vmmc regulators on iProc
The Linux support for controlling card power via regulators appears to
be contentious. I would argue that the default behaviour is contrary to
the SDHCI spec - turning off the power writes a reserved value to the
SD Bus Voltage Select field of the Power Control Register, which
seems to kill the Arasan/iProc controller - but fortunately there is a
hook in sdhci_ops to override the behaviour. Borrow the implementation
from sdhci_arasan_set_power.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-mmc: uninitialized_var is no more
Revert "mmc: sdhci-iproc: Fix vmmc regulators on iProc"
This reverts commit aed19399a01733dbad9be8bf026a4f7dd823b04f.
Commit 6c92ae1e452f ("mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()")
introduced a generic helper that does the same thing so use that instead in
the following commit.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
mmc: sdhci-iproc: Fix vmmc regulators (pre-bcm2711)
The Linux support for controlling card power via regulators appears to
be contentious. I would argue that the default behaviour is contrary to
the SDHCI spec - turning off the power writes a reserved value to the
SD Bus Voltage Select field of the Power Control Register, which
seems to kill the Arasan/iProc controller - but fortunately there is a
hook in sdhci_ops to override the behaviour.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
bcm2835-mmc: Honor return value of mmc_of_parse()
bcm2835_mmc_probe() ignores errors returned by mmc_of_parse() and in
particular ignores -EPROBE_DEFER, which may be returned if the power
sequencing driver configured in the devicetree is compiled as a module.
The user-visible result is that access to the SDIO device fails because
its power sequencing requirements have not been observed. Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
bcm2835-mmc: Use phys addresses for slave DMA config
Contrary to what struct snd_dmaengine_dai_dma_data suggests, the
configuration of addresses of DMA slave interfaces should be done in
CPU physical addresses.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
drivers/mmc/core/block.c | 31 +-
drivers/mmc/core/core.c | 3 +-
drivers/mmc/core/quirks.h | 8 +
drivers/mmc/host/Kconfig | 29 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/bcm2835-mmc.c | 1562 ++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-iproc.c | 1 +
drivers/mmc/host/sdhci.c | 6 +-
include/linux/mmc/card.h | 1 +
9 files changed, 1637 insertions(+), 5 deletions(-)
create mode 100644 drivers/mmc/host/bcm2835-mmc.c
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -171,6 +171,13 @@ static DEFINE_MUTEX(open_lock);
module_param(perdev_minors, int, 0444);
MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
+/*
+ * Allow quirks to be overridden for the current card
+ */
+static char *card_quirks;
+module_param(card_quirks, charp, 0644);
+MODULE_PARM_DESC(card_quirks, "Force the use of the indicated quirks (a bitfield)");
+
static inline int mmc_blk_part_switch(struct mmc_card *card,
unsigned int part_type);
static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
@@ -3066,6 +3073,8 @@ static int mmc_blk_probe(struct mmc_card
{
struct mmc_blk_data *md;
int ret = 0;
+ char quirk_str[24];
+ char cap_str[10];
/*
* Check that the card supports the command class(es) we need.
@@ -3073,7 +3082,16 @@ static int mmc_blk_probe(struct mmc_card
if (!(card->csd.cmdclass & CCC_BLOCK_READ))
return -ENODEV;
- mmc_fixup_device(card, mmc_blk_fixups);
+ if (card_quirks) {
+ unsigned long quirks;
+ if (kstrtoul(card_quirks, 0, &quirks) == 0)
+ card->quirks = (unsigned int)quirks;
+ else
+ pr_err("mmc_block: Invalid card_quirks parameter '%s'\n",
+ card_quirks);
+ }
+ else
+ mmc_fixup_device(card, mmc_blk_fixups);
card->complete_wq = alloc_workqueue("mmc_complete",
WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
@@ -3088,6 +3106,17 @@ static int mmc_blk_probe(struct mmc_card
goto out_free;
}
+ string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2,
+ cap_str, sizeof(cap_str));
+ if (card->quirks)
+ snprintf(quirk_str, sizeof(quirk_str),
+ " (quirks 0x%08x)", card->quirks);
+ else
+ quirk_str[0] = '\0';
+ pr_info("%s: %s %s %s%s%s\n",
+ md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
+ cap_str, md->read_only ? " (ro)" : "", quirk_str);
+
ret = mmc_blk_alloc_parts(card, md);
if (ret)
goto out;
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1818,7 +1818,8 @@ EXPORT_SYMBOL(mmc_erase);
int mmc_can_erase(struct mmc_card *card)
{
- if (card->csd.cmdclass & CCC_ERASE && card->erase_size)
+ if (card->csd.cmdclass & CCC_ERASE && card->erase_size &&
+ !(card->quirks & MMC_QUIRK_ERASE_BROKEN))
return 1;
return 0;
}
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -134,6 +134,14 @@ static const struct mmc_fixup __maybe_un
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd,
MMC_QUIRK_BROKEN_SD_DISCARD),
+ /*
+ * On some Kingston SD cards, multiple erases of less than 64
+ * sectors can cause corruption.
+ */
+ MMC_FIXUP("SD16G", 0x41, 0x3432, add_quirk, MMC_QUIRK_ERASE_BROKEN),
+ MMC_FIXUP("SD32G", 0x41, 0x3432, add_quirk, MMC_QUIRK_ERASE_BROKEN),
+ MMC_FIXUP("SD64G", 0x41, 0x3432, add_quirk, MMC_QUIRK_ERASE_BROKEN),
+
END_FIXUP
};
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -5,6 +5,35 @@
comment "MMC/SD/SDIO Host Controller Drivers"
+config MMC_BCM2835_MMC
+ tristate "MMC support on BCM2835"
+ depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835
+ help
+ This selects the MMC Interface on BCM2835.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
+config MMC_BCM2835_DMA
+ bool "DMA support on BCM2835 Arasan controller"
+ depends on MMC_BCM2835_MMC
+ help
+ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708
+ based chips.
+
+ If unsure, say N.
+
+config MMC_BCM2835_PIO_DMA_BARRIER
+ int "Block count limit for PIO transfers"
+ depends on MMC_BCM2835_MMC && MMC_BCM2835_DMA
+ range 0 256
+ default 2
+ help
+ The inclusive limit in bytes under which PIO will be used instead of DMA
+
+ If unsure, say 2 here.
+
config MMC_DEBUG
bool "MMC host drivers debugging"
depends on MMC != n
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci
obj-$(CONFIG_MMC_SDHCI_MILBEAUT) += sdhci-milbeaut.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_SDHCI_AM654) += sdhci_am654.o
+obj-$(CONFIG_MMC_BCM2835_MMC) += bcm2835-mmc.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_ALCOR) += alcor.o
--- /dev/null
+++ b/drivers/mmc/host/bcm2835-mmc.c
@@ -0,0 +1,1562 @@
+/*
+ * BCM2835 MMC host driver.
+ *
+ * Author: Gellert Weisz <gellert@raspberrypi.org>
+ * Copyright 2014
+ *
+ * Based on
+ * sdhci-bcm2708.c by Broadcom
+ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko
+ * sdhci.c and sdhci-pci.c by Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sd.h>
+#include <linux/scatterlist.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/blkdev.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_dma.h>
+#include <linux/swiotlb.h>
+
+#include "sdhci.h"
+
+
+#define DRIVER_NAME "mmc-bcm2835"
+
+#define DBG(f, x...) \
+pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x)
+
+#ifndef CONFIG_MMC_BCM2835_DMA
+ #define FORCE_PIO
+#endif
+
+
+/* the inclusive limit in bytes under which PIO will be used instead of DMA */
+#ifdef CONFIG_MMC_BCM2835_PIO_DMA_BARRIER
+#define PIO_DMA_BARRIER CONFIG_MMC_BCM2835_PIO_DMA_BARRIER
+#else
+#define PIO_DMA_BARRIER 00
+#endif
+
+#define MIN_FREQ 400000
+#define TIMEOUT_VAL 0xE
+#define BCM2835_SDHCI_WRITE_DELAY(f) (((2 * 1000000) / f) + 1)
+
+
+unsigned mmc_debug;
+unsigned mmc_debug2;
+
+struct bcm2835_host {
+ spinlock_t lock;
+
+ void __iomem *ioaddr;
+ u32 bus_addr;
+
+ struct mmc_host *mmc;
+
+ u32 timeout;
+
+ int clock; /* Current clock speed */
+ u8 pwr; /* Current voltage */
+
+ unsigned int max_clk; /* Max possible freq */
+ unsigned int timeout_clk; /* Timeout freq (KHz) */
+ unsigned int clk_mul; /* Clock Muliplier value */
+
+ struct tasklet_struct finish_tasklet; /* Tasklet structures */
+
+ struct timer_list timer; /* Timer for timeouts */
+
+ struct sg_mapping_iter sg_miter; /* SG state for PIO */
+ unsigned int blocks; /* remaining PIO blocks */
+
+ int irq; /* Device IRQ */
+
+
+ u32 ier; /* cached registers */
+
+ struct mmc_request *mrq; /* Current request */
+ struct mmc_command *cmd; /* Current command */
+ struct mmc_data *data; /* Current data request */
+ unsigned int data_early:1; /* Data finished before cmd */
+
+ wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
+
+ u32 shadow;
+
+ /*DMA part*/
+ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */
+ struct dma_slave_config dma_cfg_rx;
+ struct dma_slave_config dma_cfg_tx;
+ struct dma_async_tx_descriptor *tx_desc; /* descriptor */
+
+ bool have_dma;
+ bool use_dma;
+ bool wait_for_dma;
+ /*end of DMA part*/
+
+ int max_delay; /* maximum length of time spent waiting */
+
+ int flags; /* Host attributes */
+#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
+#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
+#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
+#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
+
+ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */
+ u32 max_overclock; /* Highest reported */
+};
+
+
+static inline void bcm2835_mmc_writel(struct bcm2835_host *host, u32 val, int reg, int from)
+{
+ unsigned delay;
+ lockdep_assert_held_once(&host->lock);
+ writel(val, host->ioaddr + reg);
+ udelay(BCM2835_SDHCI_WRITE_DELAY(max(host->clock, MIN_FREQ)));
+
+ delay = ((mmc_debug >> 16) & 0xf) << ((mmc_debug >> 20) & 0xf);
+ if (delay && !((1<<from) & mmc_debug2))
+ udelay(delay);
+}
+
+static inline void mmc_raw_writel(struct bcm2835_host *host, u32 val, int reg)
+{
+ unsigned delay;
+ lockdep_assert_held_once(&host->lock);
+ writel(val, host->ioaddr + reg);
+
+ delay = ((mmc_debug >> 24) & 0xf) << ((mmc_debug >> 28) & 0xf);
+ if (delay)
+ udelay(delay);
+}
+
+static inline u32 bcm2835_mmc_readl(struct bcm2835_host *host, int reg)
+{
+ lockdep_assert_held_once(&host->lock);
+ return readl(host->ioaddr + reg);
+}
+
+static inline void bcm2835_mmc_writew(struct bcm2835_host *host, u16 val, int reg)
+{
+ u32 oldval = (reg == SDHCI_COMMAND) ? host->shadow :
+ bcm2835_mmc_readl(host, reg & ~3);
+ u32 word_num = (reg >> 1) & 1;
+ u32 word_shift = word_num * 16;
+ u32 mask = 0xffff << word_shift;
+ u32 newval = (oldval & ~mask) | (val << word_shift);
+
+ if (reg == SDHCI_TRANSFER_MODE)
+ host->shadow = newval;
+ else
+ bcm2835_mmc_writel(host, newval, reg & ~3, 0);
+
+}
+
+static inline void bcm2835_mmc_writeb(struct bcm2835_host *host, u8 val, int reg)
+{
+ u32 oldval = bcm2835_mmc_readl(host, reg & ~3);
+ u32 byte_num = reg & 3;
+ u32 byte_shift = byte_num * 8;
+ u32 mask = 0xff << byte_shift;
+ u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+ bcm2835_mmc_writel(host, newval, reg & ~3, 1);
+}
+
+
+static inline u16 bcm2835_mmc_readw(struct bcm2835_host *host, int reg)
+{
+ u32 val = bcm2835_mmc_readl(host, (reg & ~3));
+ u32 word_num = (reg >> 1) & 1;
+ u32 word_shift = word_num * 16;
+ u32 word = (val >> word_shift) & 0xffff;
+
+ return word;
+}
+
+static inline u8 bcm2835_mmc_readb(struct bcm2835_host *host, int reg)
+{
+ u32 val = bcm2835_mmc_readl(host, (reg & ~3));
+ u32 byte_num = reg & 3;
+ u32 byte_shift = byte_num * 8;
+ u32 byte = (val >> byte_shift) & 0xff;
+
+ return byte;
+}
+
+static void bcm2835_mmc_unsignal_irqs(struct bcm2835_host *host, u32 clear)
+{
+ u32 ier;
+
+ ier = bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE);
+ ier &= ~clear;
+ /* change which requests generate IRQs - makes no difference to
+ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */
+ bcm2835_mmc_writel(host, ier, SDHCI_SIGNAL_ENABLE, 2);
+}
+
+
+static void bcm2835_mmc_dumpregs(struct bcm2835_host *host)
+{
+ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
+ mmc_hostname(host->mmc));
+
+ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
+ bcm2835_mmc_readl(host, SDHCI_DMA_ADDRESS),
+ bcm2835_mmc_readw(host, SDHCI_HOST_VERSION));
+ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ bcm2835_mmc_readw(host, SDHCI_BLOCK_SIZE),
+ bcm2835_mmc_readw(host, SDHCI_BLOCK_COUNT));
+ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
+ bcm2835_mmc_readl(host, SDHCI_ARGUMENT),
+ bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE));
+ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
+ bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE),
+ bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL));
+ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
+ bcm2835_mmc_readb(host, SDHCI_POWER_CONTROL),
+ bcm2835_mmc_readb(host, SDHCI_BLOCK_GAP_CONTROL));
+ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
+ bcm2835_mmc_readb(host, SDHCI_WAKE_UP_CONTROL),
+ bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL));
+ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
+ bcm2835_mmc_readb(host, SDHCI_TIMEOUT_CONTROL),
+ bcm2835_mmc_readl(host, SDHCI_INT_STATUS));
+ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
+ bcm2835_mmc_readl(host, SDHCI_INT_ENABLE),
+ bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE));
+ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
+ bcm2835_mmc_readw(host, SDHCI_AUTO_CMD_STATUS),
+ bcm2835_mmc_readw(host, SDHCI_SLOT_INT_STATUS));
+ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
+ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES),
+ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES_1));
+ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
+ bcm2835_mmc_readw(host, SDHCI_COMMAND),
+ bcm2835_mmc_readl(host, SDHCI_MAX_CURRENT));
+ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
+ bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2));
+
+ pr_debug(DRIVER_NAME ": ===========================================\n");
+}
+
+
+static void bcm2835_mmc_reset(struct bcm2835_host *host, u8 mask)
+{
+ unsigned long timeout;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ bcm2835_mmc_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+
+ if (mask & SDHCI_RESET_ALL)
+ host->clock = 0;
+
+ /* Wait max 100 ms */
+ timeout = 100;
+
+ /* hw clears the bit when it's done */
+ while (bcm2835_mmc_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
+ if (timeout == 0) {
+ pr_err("%s: Reset 0x%x never completed.\n",
+ mmc_hostname(host->mmc), (int)mask);
+ bcm2835_mmc_dumpregs(host);
+ return;
+ }
+ timeout--;
+ spin_unlock_irqrestore(&host->lock, flags);
+ mdelay(1);
+ spin_lock_irqsave(&host->lock, flags);
+ }
+
+ if (100-timeout > 10 && 100-timeout > host->max_delay) {
+ host->max_delay = 100-timeout;
+ pr_warn("Warning: MMC controller hung for %d ms\n", host->max_delay);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
+
+static void bcm2835_mmc_init(struct bcm2835_host *host, int soft)
+{
+ unsigned long flags;
+ if (soft)
+ bcm2835_mmc_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
+ else
+ bcm2835_mmc_reset(host, SDHCI_RESET_ALL);
+
+ host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
+ SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
+ SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
+ SDHCI_INT_RESPONSE;
+
+ spin_lock_irqsave(&host->lock, flags);
+ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 3);
+ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 3);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ if (soft) {
+ /* force clock reconfiguration */
+ host->clock = 0;
+ bcm2835_mmc_set_ios(host->mmc, &host->mmc->ios);
+ }
+}
+
+
+
+static void bcm2835_mmc_finish_data(struct bcm2835_host *host);
+
+static void bcm2835_mmc_dma_complete(void *param)
+{
+ struct bcm2835_host *host = param;
+ struct dma_chan *dma_chan;
+ unsigned long flags;
+ u32 dir_data;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->use_dma = false;
+
+ if (host->data) {
+ dma_chan = host->dma_chan_rxtx;
+ if (host->data->flags & MMC_DATA_WRITE)
+ dir_data = DMA_TO_DEVICE;
+ else
+ dir_data = DMA_FROM_DEVICE;
+ dma_unmap_sg(dma_chan->device->dev,
+ host->data->sg, host->data->sg_len,
+ dir_data);
+ if (! (host->data->flags & MMC_DATA_WRITE))
+ bcm2835_mmc_finish_data(host);
+ } else if (host->wait_for_dma) {
+ host->wait_for_dma = false;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void bcm2835_bcm2835_mmc_read_block_pio(struct bcm2835_host *host)
+{
+ unsigned long flags;
+ size_t blksize, len, chunk;
+
+ u32 scratch = 0;
+ u8 *buf;
+
+ blksize = host->data->blksz;
+ chunk = 0;
+
+ local_irq_save(flags);
+
+ while (blksize) {
+ if (!sg_miter_next(&host->sg_miter))
+ BUG();
+
+ len = min(host->sg_miter.length, blksize);
+
+ blksize -= len;
+ host->sg_miter.consumed = len;
+
+ buf = host->sg_miter.addr;
+
+ while (len) {
+ if (chunk == 0) {
+ scratch = bcm2835_mmc_readl(host, SDHCI_BUFFER);
+ chunk = 4;
+ }
+
+ *buf = scratch & 0xFF;
+
+ buf++;
+ scratch >>= 8;
+ chunk--;
+ len--;
+ }
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+static void bcm2835_bcm2835_mmc_write_block_pio(struct bcm2835_host *host)
+{
+ unsigned long flags;
+ size_t blksize, len, chunk;
+ u32 scratch;
+ u8 *buf;
+
+ blksize = host->data->blksz;
+ chunk = 0;
+ chunk = 0;
+ scratch = 0;
+
+ local_irq_save(flags);
+
+ while (blksize) {
+ if (!sg_miter_next(&host->sg_miter))
+ BUG();
+
+ len = min(host->sg_miter.length, blksize);
+
+ blksize -= len;
+ host->sg_miter.consumed = len;
+
+ buf = host->sg_miter.addr;
+
+ while (len) {
+ scratch |= (u32)*buf << (chunk * 8);
+
+ buf++;
+ chunk++;
+ len--;
+
+ if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
+ mmc_raw_writel(host, scratch, SDHCI_BUFFER);
+ chunk = 0;
+ scratch = 0;
+ }
+ }
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+
+static void bcm2835_mmc_transfer_pio(struct bcm2835_host *host)
+{
+ u32 mask;
+
+ BUG_ON(!host->data);
+
+ if (host->blocks == 0)
+ return;
+
+ if (host->data->flags & MMC_DATA_READ)
+ mask = SDHCI_DATA_AVAILABLE;
+ else
+ mask = SDHCI_SPACE_AVAILABLE;
+
+ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) {
+
+ if (host->data->flags & MMC_DATA_READ)
+ bcm2835_bcm2835_mmc_read_block_pio(host);
+ else
+ bcm2835_bcm2835_mmc_write_block_pio(host);
+
+ host->blocks--;
+
+ /* QUIRK used in sdhci.c removes the 'if' */
+ /* but it seems this is unnecessary */
+ if (host->blocks == 0)
+ break;
+
+
+ }
+}
+
+
+static void bcm2835_mmc_transfer_dma(struct bcm2835_host *host)
+{
+ u32 len, dir_data, dir_slave;
+ struct dma_async_tx_descriptor *desc = NULL;
+ struct dma_chan *dma_chan;
+
+
+ WARN_ON(!host->data);
+
+ if (!host->data)
+ return;
+
+ if (host->blocks == 0)
+ return;
+
+ dma_chan = host->dma_chan_rxtx;
+ if (host->data->flags & MMC_DATA_READ) {
+ dir_data = DMA_FROM_DEVICE;
+ dir_slave = DMA_DEV_TO_MEM;
+ } else {
+ dir_data = DMA_TO_DEVICE;
+ dir_slave = DMA_MEM_TO_DEV;
+ }
+
+ /* The parameters have already been validated, so this will not fail */
+ (void)dmaengine_slave_config(dma_chan,
+ (dir_data == DMA_FROM_DEVICE) ?
+ &host->dma_cfg_rx :
+ &host->dma_cfg_tx);
+
+ BUG_ON(!dma_chan->device);
+ BUG_ON(!dma_chan->device->dev);
+ BUG_ON(!host->data->sg);
+
+ len = dma_map_sg(dma_chan->device->dev, host->data->sg,
+ host->data->sg_len, dir_data);
+ if (len > 0) {
+ desc = dmaengine_prep_slave_sg(dma_chan, host->data->sg,
+ len, dir_slave,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ } else {
+ dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n");
+ }
+ if (desc) {
+ unsigned long flags;
+ spin_lock_irqsave(&host->lock, flags);
+ bcm2835_mmc_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
+ SDHCI_INT_SPACE_AVAIL);
+ host->tx_desc = desc;
+ desc->callback = bcm2835_mmc_dma_complete;
+ desc->callback_param = host;
+ spin_unlock_irqrestore(&host->lock, flags);
+ dmaengine_submit(desc);
+ dma_async_issue_pending(dma_chan);
+ } else {
+ dma_unmap_sg(dma_chan->device->dev, host->data->sg, len, dir_data);
+ }
+
+}
+
+
+
+static void bcm2835_mmc_set_transfer_irqs(struct bcm2835_host *host)
+{
+ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
+ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
+
+ if (host->use_dma)
+ host->ier = (host->ier & ~pio_irqs) | dma_irqs;
+ else
+ host->ier = (host->ier & ~dma_irqs) | pio_irqs;
+
+ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 4);
+ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 4);
+}
+
+
+static void bcm2835_mmc_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd)
+{
+ u8 count;
+ struct mmc_data *data = cmd->data;
+
+ WARN_ON(host->data);
+
+ if (data || (cmd->flags & MMC_RSP_BUSY)) {
+ count = TIMEOUT_VAL;
+ bcm2835_mmc_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+ }
+
+ if (!data)
+ return;
+
+ /* Sanity checks */
+ BUG_ON(data->blksz * data->blocks > 524288);
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
+ BUG_ON(data->blocks > 65535);
+
+ host->data = data;
+ host->data_early = 0;
+ host->data->bytes_xfered = 0;
+
+
+ if (!(host->flags & SDHCI_REQ_USE_DMA)) {
+ int flags;
+
+ flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ host->blocks = data->blocks;
+ }
+
+ host->use_dma = host->have_dma && data->blocks > PIO_DMA_BARRIER;
+
+ bcm2835_mmc_set_transfer_irqs(host);
+
+ /* Set the DMA boundary value and block size */
+ bcm2835_mmc_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
+ data->blksz), SDHCI_BLOCK_SIZE);
+ bcm2835_mmc_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+
+ BUG_ON(!host->data);
+}
+
+static void bcm2835_mmc_set_transfer_mode(struct bcm2835_host *host,
+ struct mmc_command *cmd)
+{
+ u16 mode;
+ struct mmc_data *data = cmd->data;
+
+ if (data == NULL) {
+ /* clear Auto CMD settings for no data CMDs */
+ mode = bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE);
+ bcm2835_mmc_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+ SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
+ return;
+ }
+
+ WARN_ON(!host->data);
+
+ mode = SDHCI_TRNS_BLK_CNT_EN;
+
+ if ((mmc_op_multi(cmd->opcode) || data->blocks > 1)) {
+ mode |= SDHCI_TRNS_MULTI;
+
+ /*
+ * If we are sending CMD23, CMD12 never gets sent
+ * on successful completion (so no Auto-CMD12).
+ */
+ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12))
+ mode |= SDHCI_TRNS_AUTO_CMD12;
+ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
+ mode |= SDHCI_TRNS_AUTO_CMD23;
+ bcm2835_mmc_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2, 5);
+ }
+ }
+
+ if (data->flags & MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ mode |= SDHCI_TRNS_DMA;
+
+ bcm2835_mmc_writew(host, mode, SDHCI_TRANSFER_MODE);
+}
+
+void bcm2835_mmc_send_command(struct bcm2835_host *host, struct mmc_command *cmd)
+{
+ int flags;
+ u32 mask;
+ unsigned long timeout;
+
+ WARN_ON(host->cmd);
+
+ /* Wait max 10 ms */
+ timeout = 1000;
+
+ mask = SDHCI_CMD_INHIBIT;
+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ mask |= SDHCI_DATA_INHIBIT;
+
+ /* We shouldn't wait for data inihibit for stop commands, even
+ though they might use busy signaling */
+ if (host->mrq->data && (cmd == host->mrq->data->stop))
+ mask &= ~SDHCI_DATA_INHIBIT;
+
+ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) {
+ if (timeout == 0) {
+ pr_err("%s: Controller never released inhibit bit(s).\n",
+ mmc_hostname(host->mmc));
+ bcm2835_mmc_dumpregs(host);
+ cmd->error = -EIO;
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+ timeout--;
+ udelay(10);
+ }
+
+ if ((1000-timeout)/100 > 1 && (1000-timeout)/100 > host->max_delay) {
+ host->max_delay = (1000-timeout)/100;
+ pr_warn("Warning: MMC controller hung for %d ms\n", host->max_delay);
+ }
+
+ timeout = jiffies;
+ if (!cmd->data && cmd->busy_timeout > 9000)
+ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+ else
+ timeout += 10 * HZ;
+ mod_timer(&host->timer, timeout);
+
+ host->cmd = cmd;
+ host->use_dma = false;
+
+ bcm2835_mmc_prepare_data(host, cmd);
+
+ bcm2835_mmc_writel(host, cmd->arg, SDHCI_ARGUMENT, 6);
+
+ bcm2835_mmc_set_transfer_mode(host, cmd);
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ pr_err("%s: Unsupported response type!\n",
+ mmc_hostname(host->mmc));
+ cmd->error = -EINVAL;
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+
+ if (!(cmd->flags & MMC_RSP_PRESENT))
+ flags = SDHCI_CMD_RESP_NONE;
+ else if (cmd->flags & MMC_RSP_136)
+ flags = SDHCI_CMD_RESP_LONG;
+ else if (cmd->flags & MMC_RSP_BUSY)
+ flags = SDHCI_CMD_RESP_SHORT_BUSY;
+ else
+ flags = SDHCI_CMD_RESP_SHORT;
+
+ if (cmd->flags & MMC_RSP_CRC)
+ flags |= SDHCI_CMD_CRC;
+ if (cmd->flags & MMC_RSP_OPCODE)
+ flags |= SDHCI_CMD_INDEX;
+
+ if (cmd->data)
+ flags |= SDHCI_CMD_DATA;
+
+ bcm2835_mmc_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
+}
+
+
+static void bcm2835_mmc_finish_data(struct bcm2835_host *host)
+{
+ struct mmc_data *data;
+
+ BUG_ON(!host->data);
+
+ data = host->data;
+ host->data = NULL;
+
+ if (data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blksz * data->blocks;
+
+ /*
+ * Need to send CMD12 if -
+ * a) open-ended multiblock transfer (no CMD23)
+ * b) error in multiblock transfer
+ */
+ if (data->stop &&
+ (data->error ||
+ !host->mrq->sbc)) {
+
+ /*
+ * The controller needs a reset of internal state machines
+ * upon error conditions.
+ */
+ if (data->error) {
+ bcm2835_mmc_reset(host, SDHCI_RESET_CMD);
+ bcm2835_mmc_reset(host, SDHCI_RESET_DATA);
+ }
+
+ bcm2835_mmc_send_command(host, data->stop);
+ } else if (host->use_dma) {
+ host->wait_for_dma = true;
+ } else {
+ tasklet_schedule(&host->finish_tasklet);
+ }
+}
+
+static void bcm2835_mmc_finish_command(struct bcm2835_host *host)
+{
+ int i;
+
+ BUG_ON(host->cmd == NULL);
+
+ if (host->cmd->flags & MMC_RSP_PRESENT) {
+ if (host->cmd->flags & MMC_RSP_136) {
+ /* CRC is stripped so we need to do some shifting. */
+ for (i = 0; i < 4; i++) {
+ host->cmd->resp[i] = bcm2835_mmc_readl(host,
+ SDHCI_RESPONSE + (3-i)*4) << 8;
+ if (i != 3)
+ host->cmd->resp[i] |=
+ bcm2835_mmc_readb(host,
+ SDHCI_RESPONSE + (3-i)*4-1);
+ }
+ } else {
+ host->cmd->resp[0] = bcm2835_mmc_readl(host, SDHCI_RESPONSE);
+ }
+ }
+
+ host->cmd->error = 0;
+
+ /* Finished CMD23, now send actual command. */
+ if (host->cmd == host->mrq->sbc) {
+ host->cmd = NULL;
+ bcm2835_mmc_send_command(host, host->mrq->cmd);
+
+ if (host->mrq->cmd->data && host->use_dma) {
+ /* DMA transfer starts now, PIO starts after interrupt */
+ bcm2835_mmc_transfer_dma(host);
+ }
+ } else {
+
+ /* Processed actual command. */
+ if (host->data && host->data_early)
+ bcm2835_mmc_finish_data(host);
+
+ if (!host->cmd->data)
+ tasklet_schedule(&host->finish_tasklet);
+
+ host->cmd = NULL;
+ }
+}
+
+
+static void bcm2835_mmc_timeout_timer(struct timer_list *t)
+{
+ struct bcm2835_host *host = from_timer(host, t, timer);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->mrq) {
+ pr_err("%s: Timeout waiting for hardware interrupt.\n",
+ mmc_hostname(host->mmc));
+ bcm2835_mmc_dumpregs(host);
+
+ if (host->data) {
+ host->data->error = -ETIMEDOUT;
+ bcm2835_mmc_finish_data(host);
+ } else {
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->mrq->cmd->error = -ETIMEDOUT;
+
+ tasklet_schedule(&host->finish_tasklet);
+ }
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+
+static void bcm2835_mmc_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable)
+{
+ if (!(host->flags & SDHCI_DEVICE_DEAD)) {
+ if (enable)
+ host->ier |= SDHCI_INT_CARD_INT;
+ else
+ host->ier &= ~SDHCI_INT_CARD_INT;
+
+ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 7);
+ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 7);
+ }
+}
+
+static void bcm2835_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (enable)
+ host->flags |= SDHCI_SDIO_IRQ_ENABLED;
+ else
+ host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
+
+ bcm2835_mmc_enable_sdio_irq_nolock(host, enable);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void bcm2835_mmc_cmd_irq(struct bcm2835_host *host, u32 intmask)
+{
+
+ BUG_ON(intmask == 0);
+
+ if (!host->cmd) {
+ pr_err("%s: Got command interrupt 0x%08x even "
+ "though no command operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
+ bcm2835_mmc_dumpregs(host);
+ return;
+ }
+
+ if (intmask & SDHCI_INT_TIMEOUT)
+ host->cmd->error = -ETIMEDOUT;
+ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
+ SDHCI_INT_INDEX)) {
+ host->cmd->error = -EILSEQ;
+ }
+
+ if (host->cmd->error) {
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+
+ if (intmask & SDHCI_INT_RESPONSE)
+ bcm2835_mmc_finish_command(host);
+
+}
+
+static void bcm2835_mmc_data_irq(struct bcm2835_host *host, u32 intmask)
+{
+ struct dma_chan *dma_chan;
+ u32 dir_data;
+
+ BUG_ON(intmask == 0);
+
+ if (!host->data) {
+ /*
+ * The "data complete" interrupt is also used to
+ * indicate that a busy state has ended. See comment
+ * above in sdhci_cmd_irq().
+ */
+ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
+ if (intmask & SDHCI_INT_DATA_END) {
+ bcm2835_mmc_finish_command(host);
+ return;
+ }
+ }
+
+ pr_debug("%s: Got data interrupt 0x%08x even "
+ "though no data operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
+ bcm2835_mmc_dumpregs(host);
+
+ return;
+ }
+
+ if (intmask & SDHCI_INT_DATA_TIMEOUT)
+ host->data->error = -ETIMEDOUT;
+ else if (intmask & SDHCI_INT_DATA_END_BIT)
+ host->data->error = -EILSEQ;
+ else if ((intmask & SDHCI_INT_DATA_CRC) &&
+ SDHCI_GET_CMD(bcm2835_mmc_readw(host, SDHCI_COMMAND))
+ != MMC_BUS_TEST_R)
+ host->data->error = -EILSEQ;
+
+ if (host->use_dma) {
+ if (host->data->flags & MMC_DATA_WRITE) {
+ /* IRQ handled here */
+
+ dma_chan = host->dma_chan_rxtx;
+ dir_data = DMA_TO_DEVICE;
+ dma_unmap_sg(dma_chan->device->dev,
+ host->data->sg, host->data->sg_len,
+ dir_data);
+
+ bcm2835_mmc_finish_data(host);
+ }
+
+ } else {
+ if (host->data->error)
+ bcm2835_mmc_finish_data(host);
+ else {
+ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
+ bcm2835_mmc_transfer_pio(host);
+
+ if (intmask & SDHCI_INT_DATA_END) {
+ if (host->cmd) {
+ /*
+ * Data managed to finish before the
+ * command completed. Make sure we do
+ * things in the proper order.
+ */
+ host->data_early = 1;
+ } else {
+ bcm2835_mmc_finish_data(host);
+ }
+ }
+ }
+ }
+}
+
+
+static irqreturn_t bcm2835_mmc_irq(int irq, void *dev_id)
+{
+ irqreturn_t result = IRQ_NONE;
+ struct bcm2835_host *host = dev_id;
+ u32 intmask, mask, unexpected = 0;
+ int max_loops = 16;
+
+ spin_lock(&host->lock);
+
+ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS);
+
+ if (!intmask || intmask == 0xffffffff) {
+ result = IRQ_NONE;
+ goto out;
+ }
+
+ do {
+ /* Clear selected interrupts. */
+ mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+ SDHCI_INT_BUS_POWER);
+ bcm2835_mmc_writel(host, mask, SDHCI_INT_STATUS, 8);
+
+
+ if (intmask & SDHCI_INT_CMD_MASK)
+ bcm2835_mmc_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+
+ if (intmask & SDHCI_INT_DATA_MASK)
+ bcm2835_mmc_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
+
+ if (intmask & SDHCI_INT_BUS_POWER)
+ pr_err("%s: Card is consuming too much power!\n",
+ mmc_hostname(host->mmc));
+
+ if (intmask & SDHCI_INT_CARD_INT) {
+ bcm2835_mmc_enable_sdio_irq_nolock(host, false);
+ sdio_signal_irq(host->mmc);
+ }
+
+ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
+ SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+ SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
+ SDHCI_INT_CARD_INT);
+
+ if (intmask) {
+ unexpected |= intmask;
+ bcm2835_mmc_writel(host, intmask, SDHCI_INT_STATUS, 9);
+ }
+
+ if (result == IRQ_NONE)
+ result = IRQ_HANDLED;
+
+ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS);
+ } while (intmask && --max_loops);
+out:
+ spin_unlock(&host->lock);
+
+ if (unexpected) {
+ pr_err("%s: Unexpected interrupt 0x%08x.\n",
+ mmc_hostname(host->mmc), unexpected);
+ bcm2835_mmc_dumpregs(host);
+ }
+
+ return result;
+}
+
+
+static void bcm2835_mmc_ack_sdio_irq(struct mmc_host *mmc)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
+ bcm2835_mmc_enable_sdio_irq_nolock(host, true);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void bcm2835_mmc_set_clock(struct bcm2835_host *host, unsigned int clock)
+{
+ int div = 0; /* Initialized for compiler warning */
+ int real_div = div, clk_mul = 1;
+ u16 clk = 0;
+ unsigned long timeout;
+ unsigned int input_clock = clock;
+
+ if (host->overclock_50 && (clock == 50000000))
+ clock = host->overclock_50 * 1000000 + 999999;
+
+ host->mmc->actual_clock = 0;
+
+ bcm2835_mmc_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ /* Version 3.00 divisors must be a multiple of 2. */
+ if (host->max_clk <= clock)
+ div = 1;
+ else {
+ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
+ div += 2) {
+ if ((host->max_clk / div) <= clock)
+ break;
+ }
+ }
+
+ real_div = div;
+ div >>= 1;
+
+ if (real_div)
+ clock = (host->max_clk * clk_mul) / real_div;
+ host->mmc->actual_clock = clock;
+
+ if ((clock > input_clock) && (clock > host->max_overclock)) {
+ pr_warn("%s: Overclocking to %dHz\n",
+ mmc_hostname(host->mmc), clock);
+ host->max_overclock = clock;
+ }
+
+ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
+ clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
+ << SDHCI_DIVIDER_HI_SHIFT;
+ clk |= SDHCI_CLOCK_INT_EN;
+ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ pr_err("%s: Internal clock never "
+ "stabilised.\n", mmc_hostname(host->mmc));
+ bcm2835_mmc_dumpregs(host);
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ if (20-timeout > 10 && 20-timeout > host->max_delay) {
+ host->max_delay = 20-timeout;
+ pr_warn("Warning: MMC controller hung for %d ms\n", host->max_delay);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static void bcm2835_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct bcm2835_host *host;
+ unsigned long flags;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = mrq;
+
+ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
+ bcm2835_mmc_send_command(host, mrq->sbc);
+ else
+ bcm2835_mmc_send_command(host, mrq->cmd);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ if (!(mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) && mrq->cmd->data && host->use_dma) {
+ /* DMA transfer starts now, PIO starts after interrupt */
+ bcm2835_mmc_transfer_dma(host);
+ }
+}
+
+
+static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+
+ struct bcm2835_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ u8 ctrl;
+ u16 clk, ctrl_2;
+
+ pr_debug("bcm2835_mmc_set_ios: clock %d, pwr %d, bus_width %d, timing %d, vdd %d, drv_type %d\n",
+ ios->clock, ios->power_mode, ios->bus_width,
+ ios->timing, ios->signal_voltage, ios->drv_type);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!ios->clock || ios->clock != host->clock) {
+ bcm2835_mmc_set_clock(host, ios->clock);
+ host->clock = ios->clock;
+ }
+
+ if (host->pwr != SDHCI_POWER_330) {
+ host->pwr = SDHCI_POWER_330;
+ bcm2835_mmc_writeb(host, SDHCI_POWER_330 | SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+ }
+
+ ctrl = bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL);
+
+ /* set bus width */
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+
+ ctrl &= ~SDHCI_CTRL_HISPD; /* NO_HISPD_BIT */
+
+
+ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ /*
+ * We only need to set Driver Strength if the
+ * preset value enable is not set.
+ */
+ ctrl_2 = bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
+ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
+ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
+
+ bcm2835_mmc_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+
+ /* Reset SD Clock Enable */
+ clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Re-enable SD Clock */
+ bcm2835_mmc_set_clock(host, host->clock);
+ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+
+static struct mmc_host_ops bcm2835_ops = {
+ .request = bcm2835_mmc_request,
+ .set_ios = bcm2835_mmc_set_ios,
+ .enable_sdio_irq = bcm2835_mmc_enable_sdio_irq,
+ .ack_sdio_irq = bcm2835_mmc_ack_sdio_irq,
+};
+
+
+static void bcm2835_mmc_tasklet_finish(unsigned long param)
+{
+ struct bcm2835_host *host;
+ unsigned long flags;
+ struct mmc_request *mrq;
+
+ host = (struct bcm2835_host *)param;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /*
+ * If this tasklet gets rescheduled while running, it will
+ * be run again afterwards but without any active request.
+ */
+ if (!host->mrq) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ del_timer(&host->timer);
+
+ mrq = host->mrq;
+
+ /*
+ * The controller needs a reset of internal state machines
+ * upon error conditions.
+ */
+ if (!(host->flags & SDHCI_DEVICE_DEAD) &&
+ ((mrq->cmd && mrq->cmd->error) ||
+ (mrq->data && (mrq->data->error ||
+ (mrq->data->stop && mrq->data->stop->error))))) {
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ bcm2835_mmc_reset(host, SDHCI_RESET_CMD);
+ bcm2835_mmc_reset(host, SDHCI_RESET_DATA);
+ spin_lock_irqsave(&host->lock, flags);
+ }
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ mmc_request_done(host->mmc, mrq);
+}
+
+
+
+static int bcm2835_mmc_add_host(struct bcm2835_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ struct device *dev = mmc->parent;
+#ifndef FORCE_PIO
+ struct dma_slave_config cfg;
+#endif
+ int ret;
+
+ bcm2835_mmc_reset(host, SDHCI_RESET_ALL);
+
+ host->clk_mul = 0;
+
+ if (!mmc->f_max || mmc->f_max > host->max_clk)
+ mmc->f_max = host->max_clk;
+ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+
+ /* SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK */
+ host->timeout_clk = mmc->f_max / 1000;
+ mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
+
+ /* host controller capabilities */
+ mmc->caps |= MMC_CAP_CMD23 | MMC_CAP_NEEDS_POLL |
+ MMC_CAP_SDIO_IRQ | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_MMC_HIGHSPEED;
+
+ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+
+ host->flags = SDHCI_AUTO_CMD23;
+
+ dev_info(dev, "mmc_debug:%x mmc_debug2:%x\n", mmc_debug, mmc_debug2);
+#ifdef FORCE_PIO
+ dev_info(dev, "Forcing PIO mode\n");
+ host->have_dma = false;
+#else
+ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) {
+ dev_err(dev, "%s: Unable to initialise DMA channel. Falling back to PIO\n",
+ DRIVER_NAME);
+ host->have_dma = false;
+ } else {
+ dev_info(dev, "DMA channel allocated");
+
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+ /* Validate the slave configurations */
+
+ cfg.direction = DMA_MEM_TO_DEV;
+ cfg.src_addr = 0;
+ cfg.dst_addr = host->bus_addr + SDHCI_BUFFER;
+
+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg);
+
+ if (ret == 0) {
+ host->dma_cfg_tx = cfg;
+
+ cfg.direction = DMA_DEV_TO_MEM;
+ cfg.src_addr = host->bus_addr + SDHCI_BUFFER;
+ cfg.dst_addr = 0;
+
+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg);
+ }
+
+ if (ret == 0) {
+ host->dma_cfg_rx = cfg;
+
+ host->have_dma = true;
+ } else {
+ pr_err("%s: unable to configure DMA channel. "
+ "Falling back to PIO\n",
+ mmc_hostname(mmc));
+ dma_release_channel(host->dma_chan_rxtx);
+ host->dma_chan_rxtx = NULL;
+ host->have_dma = false;
+ }
+ }
+#endif
+ mmc->max_segs = 128;
+ mmc->max_req_size = min_t(size_t, 524288, dma_max_mapping_size(dev));
+ mmc->max_seg_size = mmc->max_req_size;
+ mmc->max_blk_size = 512;
+ mmc->max_blk_count = 65535;
+
+ /* report supported voltage ranges */
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ tasklet_init(&host->finish_tasklet,
+ bcm2835_mmc_tasklet_finish, (unsigned long)host);
+
+ timer_setup(&host->timer, bcm2835_mmc_timeout_timer, 0);
+ init_waitqueue_head(&host->buf_ready_int);
+
+ bcm2835_mmc_init(host, 0);
+ ret = request_irq(host->irq, bcm2835_mmc_irq, IRQF_SHARED,
+ mmc_hostname(mmc), host);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ %d: %d\n", host->irq, ret);
+ goto untasklet;
+ }
+
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ dev_err(dev, "could not add MMC host\n");
+ goto free_irq;
+ }
+
+ return 0;
+
+free_irq:
+ free_irq(host->irq, host);
+untasklet:
+ tasklet_kill(&host->finish_tasklet);
+
+ return ret;
+}
+
+static int bcm2835_mmc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct clk *clk;
+ struct resource *iomem;
+ struct bcm2835_host *host;
+ struct mmc_host *mmc;
+ int ret;
+
+ mmc = mmc_alloc_host(sizeof(*host), dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ mmc->ops = &bcm2835_ops;
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->timeout = msecs_to_jiffies(1000);
+ spin_lock_init(&host->lock);
+
+ host->ioaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &iomem);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
+ goto err;
+ }
+
+ host->bus_addr = iomem->start;
+
+#ifndef FORCE_PIO
+ if (node) {
+ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx");
+ if (!host->dma_chan_rxtx)
+ host->dma_chan_rxtx =
+ dma_request_slave_channel(dev, "tx");
+ if (!host->dma_chan_rxtx)
+ host->dma_chan_rxtx =
+ dma_request_slave_channel(dev, "rx");
+ } else {
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ /* we don't care about the channel, any would work */
+ dma_cap_set(DMA_SLAVE, mask);
+ host->dma_chan_rxtx = dma_request_channel(mask, NULL, NULL);
+ }
+#endif
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ if (ret == -EPROBE_DEFER)
+ dev_info(dev, "could not get clk, deferring probe\n");
+ else
+ dev_err(dev, "could not get clk\n");
+ goto err;
+ }
+
+ host->max_clk = clk_get_rate(clk);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq <= 0) {
+ dev_err(dev, "get IRQ failed\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (node) {
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto err;
+
+ /* Read any custom properties */
+ of_property_read_u32(node,
+ "brcm,overclock-50",
+ &host->overclock_50);
+ } else {
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ }
+
+ ret = bcm2835_mmc_add_host(host);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+err:
+ if (host->dma_chan_rxtx)
+ dma_release_channel(host->dma_chan_rxtx);
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static int bcm2835_mmc_remove(struct platform_device *pdev)
+{
+ struct bcm2835_host *host = platform_get_drvdata(pdev);
+ unsigned long flags;
+ int dead;
+ u32 scratch;
+
+ dead = 0;
+ scratch = bcm2835_mmc_readl(host, SDHCI_INT_STATUS);
+ if (scratch == (u32)-1)
+ dead = 1;
+
+
+ if (dead) {
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->flags |= SDHCI_DEVICE_DEAD;
+
+ if (host->mrq) {
+ pr_err("%s: Controller removed during "
+ " transfer!\n", mmc_hostname(host->mmc));
+
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
+
+ mmc_remove_host(host->mmc);
+
+ if (!dead)
+ bcm2835_mmc_reset(host, SDHCI_RESET_ALL);
+
+ free_irq(host->irq, host);
+
+ del_timer_sync(&host->timer);
+
+ tasklet_kill(&host->finish_tasklet);
+
+ if (host->dma_chan_rxtx)
+ dma_release_channel(host->dma_chan_rxtx);
+
+ mmc_free_host(host->mmc);
+
+ return 0;
+}
+
+
+static const struct of_device_id bcm2835_mmc_match[] = {
+ { .compatible = "brcm,bcm2835-mmc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_mmc_match);
+
+
+
+static struct platform_driver bcm2835_mmc_driver = {
+ .probe = bcm2835_mmc_probe,
+ .remove = bcm2835_mmc_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = bcm2835_mmc_match,
+ },
+};
+module_platform_driver(bcm2835_mmc_driver);
+
+module_param(mmc_debug, uint, 0644);
+module_param(mmc_debug2, uint, 0644);
+MODULE_ALIAS("platform:mmc-bcm2835");
+MODULE_DESCRIPTION("BCM2835 SDHCI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gellert Weisz");
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -198,6 +198,7 @@ static const struct sdhci_ops sdhci_ipro
.write_b = sdhci_iproc_writeb,
.set_clock = sdhci_set_clock,
.get_max_clock = sdhci_iproc_get_max_clock,
+ .set_power = sdhci_set_power_and_bus_voltage,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -40,7 +40,7 @@
pr_debug("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
#define SDHCI_DUMP(f, x...) \
- pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
+ pr_debug("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
#define MAX_TUNING_LOOP 40
@@ -3212,7 +3212,7 @@ static void sdhci_timeout_timer(struct t
spin_lock_irqsave(&host->lock, flags);
if (host->cmd && !sdhci_data_line_cmd(host->cmd)) {
- pr_err("%s: Timeout waiting for hardware cmd interrupt.\n",
+ pr_debug("%s: Timeout waiting for hardware cmd interrupt.\n",
mmc_hostname(host->mmc));
sdhci_err_stats_inc(host, REQ_TIMEOUT);
sdhci_dumpregs(host);
@@ -3235,7 +3235,7 @@ static void sdhci_timeout_data_timer(str
if (host->data || host->data_cmd ||
(host->cmd && sdhci_data_line_cmd(host->cmd))) {
- pr_err("%s: Timeout waiting for hardware interrupt.\n",
+ pr_debug("%s: Timeout waiting for hardware interrupt.\n",
mmc_hostname(host->mmc));
sdhci_err_stats_inc(host, REQ_TIMEOUT);
sdhci_dumpregs(host);
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -296,6 +296,7 @@ struct mmc_card {
#define MMC_QUIRK_BROKEN_SD_DISCARD (1<<14) /* Disable broken SD discard support */
#define MMC_QUIRK_BROKEN_SD_CACHE (1<<15) /* Disable broken SD cache support */
#define MMC_QUIRK_BROKEN_CACHE_FLUSH (1<<16) /* Don't flush cache until the write has occurred */
+#define MMC_QUIRK_ERASE_BROKEN (1<<31) /* Skip erase */
bool written_flag; /* Indicates eMMC has been written since power on */
bool reenable_cmdq; /* Re-enable Command Queue */
Reference in New Issue View Git Blame Copy Permalink