mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 15:56:49 +00:00
a1a8cd8282
Hardware Specification: SoC: Mediatek MT7621DAT (MIPS1004Kc 880 MHz, dual core) RAM: 128 MB Storage: 128 MB NAND flash Ethernet: 5x 10/100/1000 Mbps LAN1,LAN2,LAN3,LAN4 & WAN Wireless: 2.4GHz: Mediatek MT7603EN up to 300Mbps (802.11b/g/n MIMO 2x2) Wireless: 5GHz: Mediatek MT7615N up to 1733Mbps (802.11n/ac MU-MIMO 4x4) LEDs: Power (white & amber), Internet (white & amber) LEDs: 2.4G (White), 5Ghz (White) Buttons: WPS, Reset USB: Front V3.0 & Rear V2.0 MAC Table Label xx:xx:xx:xx:xx:38 LAN xx:xx:xx:xx:xx:39 2.4Ghz xx:xx:xx:xx:xx:3A 5Ghz xx:xx:xx:xx:xx:3C WAN xx:xx:xx:xx:xx:38 Flash Instructions: D-Link normal OEM firmware update page 1. upload OpenWRT factory.bin like any D-Link upgrade image D-Link Fail Safe GUI: 1. Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. 2. Give it ~30 seconds, to boot the fail safe GUI 3. Connect your client computer to LAN1 of the device 4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0 5. Call the fail safe page for the device at http://192.168.0.1/ 6. Use the provided fail safe web GUI to upload the factory.bin to the device Signed-off-by: Alan Luck <luckyhome2008@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16269 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
200 lines
3.3 KiB
Plaintext
200 lines
3.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "dlink,dir-2150-r1", "mediatek,mt7621-soc";
|
|
model = "D-Link DIR-2150 R1";
|
|
|
|
aliases {
|
|
label-mac-device = &gmac1;
|
|
led-boot = &led_power_orange;
|
|
led-failsafe = &led_power_white;
|
|
led-running = &led_power_white;
|
|
led-upgrade = &led_net_orange;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power_orange: led-0 {
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_ORANGE>;
|
|
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_power_white: led-1 {
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_net_orange: led-2 {
|
|
function = LED_FUNCTION_WAN;
|
|
color = <LED_COLOR_ID_ORANGE>;
|
|
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-3 {
|
|
function = LED_FUNCTION_WAN;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "Bootloader";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "config";
|
|
reg = <0x80000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "factory";
|
|
reg = <0x100000 0x40000>;
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x400>;
|
|
};
|
|
|
|
eeprom_factory_8000: eeprom@8000 {
|
|
reg = <0x8000 0x4da8>;
|
|
};
|
|
|
|
macaddr_factory_e006: macaddr@e006 {
|
|
compatible = "mac-base";
|
|
reg = <0xe006 0x6>;
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@140000 {
|
|
label = "firmware";
|
|
compatible = "denx,uimage";
|
|
reg = <0x140000 0x7E80000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e006 2>;
|
|
nvmem-cell-names = "eeprom", "mac-address";
|
|
ieee80211-freq-limit = <2400000 2500000>;
|
|
|
|
led {
|
|
led-active-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e006 4>;
|
|
nvmem-cell-names = "eeprom", "mac-address";
|
|
ieee80211-freq-limit = <5000000 6000000>;
|
|
|
|
led {
|
|
led-active-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
nvmem-cells = <&macaddr_factory_e006 1>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&gmac1 {
|
|
status = "okay";
|
|
label = "wan";
|
|
phy-handle = <ðphy4>;
|
|
|
|
nvmem-cells = <&macaddr_factory_e006 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
ðphy4 {
|
|
/delete-property/ interrupts;
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
port@0 {
|
|
status = "okay";
|
|
label = "lan4";
|
|
};
|
|
|
|
port@1 {
|
|
status = "okay";
|
|
label = "lan3";
|
|
};
|
|
|
|
port@2 {
|
|
status = "okay";
|
|
label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
status = "okay";
|
|
label = "lan1";
|
|
};
|
|
};
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "i2c", "uart3", "jtag", "wdt";
|
|
function = "gpio";
|
|
};
|
|
};
|