Ryan Mounce a156045688 ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac) ... This patch adds support for the MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac) Specifications: - SoC: QCA9558 - RAM: 128 MB - Flash: 16 MB SPI - 2.4GHz WLAN: 3x3:3 802.11n on SoC - 5GHz WLAN: 3x3:3 802.11ac on QCA9880 connected via PCIe - Switch: 5x 1000/100/10 on QCA8337 connected via RGMII - SFP cage: connected via SGMII (tested with genuine & generic GLC-T) - USB: 1x type A, GPIO power switch - PoE: Passive input on Ether1, GPIO switched passthrough to Ether5 - Reset button - "SFP" LED connected to SoC - Ethernet LEDs connected to QCA8337 switch - Green WLAN LED connected to QCA9880 Not working: - Red WLAN LED Installation: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Ryan Mounce <ryan@mounce.com.au> (cherry picked from commit c2140e32ce)		2022-04-19 21:45:46 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: migrate Archer C5 5GHz radio device paths	2022-03-31 18:07:53 +02:00
dts	ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)	2022-04-19 21:45:46 +02:00
files	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
generic	ath79: add support for Yuncore XD3200	2022-04-15 08:14:50 +02:00
image	ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)	2022-04-19 21:45:46 +02:00
mikrotik	ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)	2022-04-19 21:45:46 +02:00
nand	ath79: improve support for GL.iNet GL-XE300	2022-03-17 21:55:10 +01:00
patches-5.10	kernel: bump 5.10 to 5.10.103	2022-03-05 21:05:45 +01:00
tiny	ath79: Move TPLink WPA8630Pv2 to ath79-tiny target	2022-04-10 16:26:01 +01:00
config-5.10	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
Makefile	ath79: switch to Kernel 5.10	2021-12-21 21:38:52 +01:00
modules.mk