openwrt/target/linux
INAGAKI Hiroshi a1373bc6fc ipq806x: add support for NEC Aterm WG2600HP
NEC Aterm WG2600HP is a 2.4/5 GHz band 11ac router, based on Qualcomm
IPQ8064.

Specification:

- IPQ8064 (384 - 1,400 MHz)
- 512 MB of RAM
- 32 MB of Flash (SPI)
- 4T4R 2.4/5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 12x LEDs, 4x keys
- 1x USB 3.0 Type-A
- UART header on PCB
  - RX, TX, NC, GND, Vcc from power connector side
  - baudrate: 115200 bps

Flash instruction using initramfs image:
1. Connect serial cable to UART header
2. Connect power cable and turn on the router
3. When the "Press the [f] key and hit [enter] to enter failsafe mode"
message is displayed on the console, press the "f" key and Enter key
sequentially to enter the failsafe mode
4. create fw_env.config file with following contents on failsafe mode:
  /dev/mtd9 0x0 0x10000 0x10000
5. Execute following commands to add and change the environment
variables of U-Boot
  fw_setenv ipaddr "192.168.0.1"
  fw_setenv serverip "192.168.0.2"
  fw_setenv autostart "yes"
  fw_setenv bootcmd "tftpboot 0x44000000 wg2600hp-initramfs.bin;
  bootipq"
6. Set the IP address of the computer to 192.168.0.2, connect to the LAN
port of WG2600HP, and start the TFTP server on the computer
7. Rename OpenWrt initramfs image for WG2600HP to
"wg2600hp-initramfs.bin" and place it in the TFTP directory
8. Remove power cable from WG2600HP, reconnect it and restart WG2600HP
9. WG2600HP downloads initramfs image from TFTP server on the computer,
loads it and boot with initramfs image
10. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with the sysupgrade image
11. Wait ~180 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-06-19 22:44:27 +02:00
..
apm821xx kernel: bump 4.14 to 4.14.48 for 18.06 2018-06-07 09:03:24 +02:00
ar7 kernel: bump 4.9 to 4.9.102 for 18.06 2018-05-24 16:03:58 +02:00
ar71xx ar71xx: add kmod-usb-ehci to fix USB on RB hAP AC 2018-06-18 21:21:56 +02:00
arc770 arc770: remove source-only 2018-05-24 17:24:30 +02:00
archs38 kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
armvirt arm64: enable harden branch predictor 2018-04-27 21:34:18 +02:00
at91 kernel: bump 4.9 to 4.9.102 for 18.06 2018-05-24 16:03:58 +02:00
ath25 ath25: drop 4.9 kernel support 2018-05-24 17:24:30 +02:00
bcm53xx kernel: bump 4.14 to 4.14.48 for 18.06 2018-06-07 09:03:24 +02:00
brcm47xx kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
brcm63xx kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
brcm2708 kernel: bump 4.9 to 4.9.109 for 18.06 2018-06-18 15:28:48 +02:00
cns3xxx kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
gemini kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
generic kernel: atm: pppoatm fix vc-mux connection failures 2018-06-18 21:29:34 +02:00
imx6 kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
ipq40xx ipq40xx: essedma: fixup ip align 2018-06-18 21:21:55 +02:00
ipq806x ipq806x: add support for NEC Aterm WG2600HP 2018-06-19 22:44:27 +02:00
ixp4xx kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
kirkwood kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
lantiq kernel: bump 4.14 to 4.14.48 for 18.06 2018-06-07 09:03:24 +02:00
layerscape kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mediatek mediatek: mt7622: Do not deactivate CONFIG_BLK_DEV 2018-06-18 21:21:55 +02:00
mpc85xx kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
mvebu mvebu: reduce speed to gen1 for espressobin pcie 2018-06-19 12:54:24 +02:00
mxs kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
octeon kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
octeontx kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
omap kernel: enable EXPORTFS by default 2018-05-24 17:24:31 +02:00
orion orion: remove linux 4.4 support 2018-04-19 14:38:57 +02:00
oxnas oxnas: reboot target 2018-06-18 18:44:14 +02:00
pistachio kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
ramips ramips: mt7621: fix wireless package selection 2018-06-19 22:44:27 +02:00
rb532 treewide: move nand_do_upgrade call to platform_do_upgrade 2018-02-16 14:44:02 +01:00
sunxi kernel: bump 4.9 to 4.9.108 for 18.06 2018-06-18 06:42:18 +02:00
uml kernel: bump 4.9 to 4.9.102 for 18.06 2018-05-24 16:03:58 +02:00
x86 kernel: bump 4.9 to 4.9.106 for 18.06 2018-06-07 09:03:05 +02:00
Makefile