Alessio Prescenzo e431195abf ramips: add support for Cudy X6 ... Specifications: SoC: MediaTek MT7621 RAM: 256 MB Flash: 32 MB WiFi: MediaTek MT7915E Switch: 1 WAN, 4 LAN (Gigabit) Ports: 1 USB 3.0 Buttons: Reset, WPS LEDs: Power, System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS, USB Power: DC 12V 1A tip positive Installation: Download and flash the manufacturer's built OpenWRT image available at http://www.cudytech.com/openwrt_software_download Install the new OpenWRT image via luci (System -> Backup/Flash firmware) Be sure to NOT keep settings. The force upgrade may need to be checked due to differences in router naming conventions. Recovery: Loads only signed manufacture firmware due to bootloader RSA verification serve tftp-recovery image as /recovery.bin on 192.168.1.88/24 connect to any lan ethernet port power on the device while holding the reset button wait at least 8 seconds before releasing reset button for image to download Signed-off-by: Alessio Prescenzo <alessioprescenzo@gmail.com> [ensure unique wireless MAC, fix GPIO pingroup] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4a8eaa5c7c)		2022-05-17 21:14:46 +02:00
..
board.d	ramips: Add support for SERCOMM NA502S	2022-05-17 21:14:45 +02:00
hotplug.d/ieee80211	ramips: add support for Cudy X6	2022-05-17 21:14:46 +02:00
init.d	ramips: add support for Linksys EA6350 v4	2022-01-08 00:49:59 +01:00
uci-defaults	ramips: remove model name from LED labels	2020-10-02 14:51:57 +02:00