openwrt/target
Roger Pueyo Centelles a0ef42e77c ath79: add support for Ubiquiti PowerBeam 5AC 500
The Ubiquiti PowerBeam 5AC 500 (PBE-5AC-500) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna.

Specifications:
 - SoC: Qualcomm Atheros QCA9558
 - RAM: 128 MB DDR2
 - Flash: 16 MB SPI NOR (mx25l12805d)
 - Ethernet: 1x 10/100/1000 Mbps Atheros 8031, 24 Vdc PoE-in
 - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
 - Buttons: 1x (reset)
 - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue
 - UART: not tested

Not supported:
 - RSSI LEDs (probably through 74HC595 chip)

Installation from stock airOS firmware:
 - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at
   https://openwrt.org/toh/ubiquiti/common

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-05-17 21:03:30 +02:00
..
imagebuilder build: refactor JSON info files to profiles.json 2020-04-03 12:17:45 +02:00
linux ath79: add support for Ubiquiti PowerBeam 5AC 500 2020-05-17 21:03:30 +02:00
sdk sdk: use bundle-libraries.sh to ship kernel objtool tools 2019-09-03 10:45:25 +02:00
toolchain toolchain: wrapper.sh: harmonize leading whitespaces 2019-12-31 01:36:16 +01:00
Config.in build: define RTC_SUPPORT as a bool 2020-04-09 12:51:10 +02:00
Makefile build: make <subdir>/install opt-in, use it for target/ only 2017-02-09 13:51:35 +01:00