Zoltan HERPAI 98eb95dd00 ath79: add support for Atheros DB120 reference board ... Atheros DB120 reference board. Specifications: SoC: QCA9344 DRAM: 128Mb DDR2 Flash: 8Mb SPI-NOR, 128Mb NAND flash Switch: 5x 10/100Mbps via AR8229 switch (integrated into SoC), 5x 10/100/1000Mbps via QCA8237 via RGMII WLAN: AR9300 (SoC, 2.4G+5G) + AR9340 (PCIe, 5G-only) USB: 1x 2.0 UART: standard QCA UART header JTAG: yes Button: 1x reset LEDs: a lot Slots: 2x mPCIe + 1x mini-PCI, but using them requires additional undocumented changes. Misc: The board allows to boot off NAND, and there is I2S audio support as well - also requiring additional undocumented changes. Installation: 1. Original bootloader Connect the board to ethernet Set up a server with an IP address of 192.168.1.10 Make the openwrt-ath79-generic-atheros_db120-squashfs-factory.bin available via TFTP tftpboot 0x80060000 openwrt-ath79-generic-atheros_db120-squashfs-factory.bin erase 0x9f050000 +$filesize cp.b $fileaddr 0x9f050000 $filesize 2. pepe2k's u-boot_mod Connect the board to ethernet Set up a server with an IP address of 192.168.1.10 Make the openwrt-ath79-generic-atheros_db120-squashfs-factory.bin available via TFTP, as "firmware.bin" run fw_upg Reboot the board. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> [explicit factory recipe in generic.mk, sorting in 10-ath9k-eeprom, convert to nvmem, use fwconcat* names in DTS, remove unneeded DT labels, remove redundant uart node] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2021-08-22 23:02:08 +02:00
..
imagebuilder	imagebuilder: unset BINARY_FOLDER and DOWNLOAD_FOLDER in final archive	2021-05-08 12:14:00 +02:00
linux	ath79: add support for Atheros DB120 reference board	2021-08-22 23:02:08 +02:00
sdk	sdk: unset BINARY_FOLDER and DOWNLOAD_FOLDER in final archives	2021-05-08 12:14:04 +02:00
toolchain	target: fix copying of licenses for SDK/toolchain	2021-02-14 21:56:29 +01:00
Config.in	base-files: rename 'sdcard' to 'legacy-sdcard'	2021-08-16 12:22:17 +01:00
Makefile