mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-21 09:42:09 +00:00
a0cc6803c8
Part of rev 44173 added setting the SM Power Save capability in the hostapd.conf file if the driver indicated that it was supported. It appears this was incorrect, because the field in the actual HT Capabilities field in the AP configuration is really a state indication. Just copying the state from the capability resulted in the AP indicating that it had SMPS enabled all the time if it supported SMPS. This effectively just disables all clients from sending packets to the AP with more than one spatial stream, for no good reason. So remove this part of the change. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> SVN-Revision: 44239
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org