openwrt/target/linux/bcm27xx/patches-6.6/950-1083-ARM-dts-Update-strict_gpiod-dtparams.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

37 lines
1.3 KiB
Diff

From c10f02385f07e40a35eef2fc9d69ecf5a37da778 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Tue, 7 May 2024 13:38:21 +0100
Subject: [PATCH 1083/1085] ARM: dts: Update strict_gpiod dtparams
Following the adoption upstream of a similar parameter but with another
name, update the dtparam definitions to use the new name and sense.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi | 2 +-
arch/arm/boot/dts/broadcom/bcm2712-rpi.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi
@@ -111,7 +111,7 @@
<&csi0>, "sync-gpios:4",
<&csi0>, "sync-gpios:8=0", <GPIO_ACTIVE_LOW>;
- strict_gpiod = <&chosen>, "bootargs=pinctrl_bcm2835.strict_gpiod=y";
+ strict_gpiod = <&chosen>, "bootargs=pinctrl_bcm2835.persist_gpio_outputs=n";
};
};
--- a/arch/arm/boot/dts/broadcom/bcm2712-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi.dtsi
@@ -99,7 +99,7 @@
nvmem_cust_rw = <&nvmem_cust>,"rw?";
nvmem_priv_rw = <&nvmem_priv>,"rw?";
nvmem_mac_rw = <&nvmem_mac>,"rw?";
- strict_gpiod = <&chosen>, "bootargs=pinctrl_rp1.strict_gpiod=y";
+ strict_gpiod = <&chosen>, "bootargs=pinctrl_rp1.persist_gpio_outputs=n";
};
};