mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
85caf21ade
With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit touches only Single Shot variant, because all have revision 1.3. Some boards could be placed in an enclosure, therefore the LED18 is enabled by default, since that'll be the only visible indicator that the board is operating. Ref: http://wiki.macchiatobin.net/tiki-index.php?page=Schematics#Revision1.3_Electrical_Design_Changes Ref: http://macchiatobin.net/wp-content/uploads/2017/11/MACCHIATOBin-rev-1_3.pdf Reported-by: Alexandra Alth <alexandra@alth.de> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
66 lines
1.9 KiB
Diff
66 lines
1.9 KiB
Diff
From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
|
|
From: Tomasz Maciej Nowak <tmn505@gmail.com>
|
|
Date: Tue, 10 Nov 2020 16:38:31 +0100
|
|
Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
|
|
|
|
With board revision 1.3, SolidRun moved the power LED to the middle of
|
|
the board. In old place of power LED a GPIO controllable heartbeat LED
|
|
was added. This commit only touches Single Shot variant, since only this
|
|
variant is all revision 1.3.
|
|
|
|
Note:
|
|
This is slightly modified patch. Some boards could be placed in an
|
|
enclosure, so the LED18 is enabled by default, since that'll be the only
|
|
visible indicator that the board is operating.
|
|
|
|
Reported-by: Alexandra Alth <alexandra@alth.de>
|
|
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
|
|
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
---
|
|
.../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++
|
|
1 file changed, 22 insertions(+)
|
|
|
|
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
|
|
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
|
|
@@ -5,6 +5,8 @@
|
|
* Device Tree file for MACCHIATOBin Armada 8040 community board platform
|
|
*/
|
|
|
|
+#include <dt-bindings/leds/common.h>
|
|
+
|
|
#include "armada-8040-mcbin.dtsi"
|
|
|
|
/ {
|
|
@@ -12,6 +14,20 @@
|
|
compatible = "marvell,armada8040-mcbin-singleshot",
|
|
"marvell,armada8040-mcbin", "marvell,armada8040",
|
|
"marvell,armada-ap806-quad", "marvell,armada-ap806";
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-0 = <&cp0_led18_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ led18 {
|
|
+ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
|
|
+ function = LED_FUNCTION_HEARTBEAT;
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ default-state = "on";
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
&cp0_eth0 {
|
|
@@ -27,3 +43,10 @@
|
|
managed = "in-band-status";
|
|
sfp = <&sfp_eth1>;
|
|
};
|
|
+
|
|
+&cp0_pinctrl {
|
|
+ cp0_led18_pins: led18-pins {
|
|
+ marvell,pins = "mpp33";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+};
|