mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
60 lines
2.3 KiB
Diff
60 lines
2.3 KiB
Diff
From d7044f06dea839c61a01e6016a4b9dee15543f8d Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Thu, 30 Jan 2020 09:47:00 +0000
|
|
Subject: [PATCH] ARM: dts: Add sd_poll_once dtparam to bcm283x/2711
|
|
|
|
The old sdtweak overlay allowed the SD interface to be effectively
|
|
disabled unless there was a card present at boot time, but that
|
|
overlay doesn't work on bcm2711 and has largely been replaced by
|
|
a set of sd_* dtparams (which have the advantage of being board-
|
|
specific.
|
|
|
|
Add an sd_poll_once dtparam to allow the same functionality on
|
|
all Raspberry Pi boards.
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/3286
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/bcm2708-rpi.dtsi | 1 +
|
|
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 ++
|
|
arch/arm/boot/dts/overlays/README | 7 +++++++
|
|
3 files changed, 10 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi
|
|
@@ -92,6 +92,7 @@
|
|
watchdog = <&watchdog>,"status";
|
|
random = <&random>,"status";
|
|
sd_overclock = <&sdhost>,"brcm,overclock-50:0";
|
|
+ sd_poll_once = <&sdhost>,"non-removable?";
|
|
sd_force_pio = <&sdhost>,"brcm,force-pio?";
|
|
sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
|
|
sd_debug = <&sdhost>,"brcm,debug";
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
@@ -349,5 +349,7 @@
|
|
|
|
eth_led0 = <&phy1>,"led-modes:0";
|
|
eth_led1 = <&phy1>,"led-modes:4";
|
|
+
|
|
+ sd_poll_once = <&emmc2>, "non-removable?";
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -165,6 +165,13 @@ Params:
|
|
sd_overclock Clock (in MHz) to use when the MMC framework
|
|
requests 50MHz
|
|
|
|
+ sd_poll_once Looks for a card once after booting. Useful
|
|
+ for network booting scenarios to avoid the
|
|
+ overhead of continuous polling. N.B. Using
|
|
+ this option restricts the system to using a
|
|
+ single card per boot (or none at all).
|
|
+ (default off)
|
|
+
|
|
sd_force_pio Disable DMA support for SD driver (default off)
|
|
|
|
sd_pio_limit Number of blocks above which to use DMA for
|