mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
84 lines
2.7 KiB
Diff
84 lines
2.7 KiB
Diff
From a3c59bad71de2b3c09a25fd6ce5e3632c33c4bba Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 26 Nov 2018 19:46:58 +0000
|
|
Subject: [PATCH] net: lan78xx: Support auto-downshift to 100Mb/s
|
|
|
|
Ethernet cables with faulty or missing pairs (specifically pairs C and
|
|
D) allow auto-negotiation to 1000Mbs, but do not support the successful
|
|
establishment of a link. Add a DT property, "microchip,downshift-after",
|
|
to configure the number of auto-negotiation failures after which it
|
|
falls back to 100Mbs. Valid values are 2, 3, 4, 5 and 0, where 0 means
|
|
never downshift.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
drivers/net/phy/microchip.c | 32 ++++++++++++++++++++++++++++++++
|
|
include/linux/microchipphy.h | 8 ++++++++
|
|
2 files changed, 40 insertions(+)
|
|
|
|
--- a/drivers/net/phy/microchip.c
|
|
+++ b/drivers/net/phy/microchip.c
|
|
@@ -228,6 +228,7 @@ static int lan88xx_probe(struct phy_devi
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct lan88xx_priv *priv;
|
|
u32 led_modes[4];
|
|
+ u32 downshift_after = 0;
|
|
int len;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
@@ -257,6 +258,37 @@ static int lan88xx_probe(struct phy_devi
|
|
return -EINVAL;
|
|
}
|
|
|
|
+ if (!of_property_read_u32(dev->of_node,
|
|
+ "microchip,downshift-after",
|
|
+ &downshift_after)) {
|
|
+ u32 mask = LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK;
|
|
+ u32 val = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT;
|
|
+
|
|
+ switch (downshift_after) {
|
|
+ case 2:
|
|
+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2;
|
|
+ break;
|
|
+ case 3:
|
|
+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3;
|
|
+ break;
|
|
+ case 4:
|
|
+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4;
|
|
+ break;
|
|
+ case 5:
|
|
+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5;
|
|
+ break;
|
|
+ case 0:
|
|
+ /* Disable completely */
|
|
+ mask = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT;
|
|
+ val = 0;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ (void)phy_modify_paged(phydev, 1, LAN78XX_PHY_CTRL3,
|
|
+ mask, val);
|
|
+ }
|
|
+
|
|
/* these values can be used to identify internal PHY */
|
|
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
|
|
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
|
|
--- a/include/linux/microchipphy.h
|
|
+++ b/include/linux/microchipphy.h
|
|
@@ -73,6 +73,14 @@
|
|
/* Registers specific to the LAN7800/LAN7850 embedded phy */
|
|
#define LAN78XX_PHY_LED_MODE_SELECT (0x1D)
|
|
|
|
+#define LAN78XX_PHY_CTRL3 (0x14)
|
|
+#define LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT (0x0010)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK (0x000c)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2 (0x0000)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3 (0x0004)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4 (0x0008)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5 (0x000c)
|
|
+
|
|
/* DSP registers */
|
|
#define PHY_ARDENNES_MMD_DEV_3_PHY_CFG (0x806A)
|
|
#define PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_ (0x2000)
|