Pawel Dembicki 426fb8cf84 ramips: add support for LB-Link BL-W1200 ... The BL-W1200 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7612E) - 5x 10/100/1000 Mbps Ethernet (MT7530) - 2x external, non-detachable antennas (Wifi 2.4G/5G) - 1x USB 2.0 - UART (R2) on PCB (57600 8n1) - 9x LED (1 GPIO controlled), 1x button - u-Boot bootloader Known issues: - No status LED. Used WPS LED during boot/failsafe/sysupgrade. Installation: 1. Apply initramfs image via factory web-gui. 2. Install sysupgrade image. How to revert to OEM firmware: - sysupgrade -n -F stock_firmware.bin Reviewed-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>		2020-05-09 20:02:17 +02:00
..
base-files/etc	ramips: remove set_preinit_iface script	2020-04-04 14:56:14 +08:00
dts	ramips: add support for LB-Link BL-W1200	2020-05-09 20:02:17 +02:00
files/drivers	ramips: ralink-eth: fix leftover dma dev argument	2020-04-13 11:32:50 +08:00
image	ramips: add support for LB-Link BL-W1200	2020-05-09 20:02:17 +02:00
mt76x8	ramips: remove config-4.14 for mt7621/mt76x8	2020-04-23 18:39:48 +02:00
mt7620	ramips: add support for LB-Link BL-W1200	2020-05-09 20:02:17 +02:00
mt7621	ramips/mt7621: mikrotik: don't use mtd-mac-address in DTS	2020-05-08 15:17:18 +02:00
patches-4.14	kernel: bump 4.14 to 4.14.176	2020-04-16 13:23:11 +02:00
patches-5.4	kernel: bump 5.4 to 5.4.36	2020-04-30 00:52:04 +02:00
rt288x	Revert "ramips: explicitly disable built-in switch for lan-only devices"	2020-04-28 16:53:29 +02:00
rt305x	ramips: explicitly disable built-in switch for lan-only devices	2020-04-27 22:54:51 +02:00
rt3883	Revert "ramips: explicitly disable built-in switch for lan-only devices"	2020-04-28 16:53:29 +02:00
Makefile	ramips: add 5.4 as testing kernel	2020-04-12 22:27:18 +08:00
modules.mk	ramips: fix path for dma-ralink and mtk-hsdma	2020-04-05 18:16:17 +08:00