mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
bd512e368f
Add support for Gateworks Venice imx8m family of boards:
- required kernel modules for on-board devices
- image generation
- initial network config
- sysupgrade support
The resulting compressed disk image
(bin/targets/imx/cortexa53/openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz)
can be installed on a Gateworks venice board via U-Boot:
u-boot=> tftpboot $loadaddr openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz && \
gzwrite mmc $dev $loadaddr $filesize
WARNING: this will overwrite any boot firmware on the eMMC user hardware
partition which if being used will brick your board requiring JTAG to
re-program boot firmware and recover
The compressed disk image contains the partition table and filesystems only
and that it is expected that boot firmware is installed properly on the
eMMC boot0 hardware partition. The easiest way to ensure this is to
use the Gateworks JTAG adapter/process to install the latest boot firmware
as follows from a Linux host:
wget http://dev.gateworks.com/jtag/jtag_usbv4
chmod +x jtag_usbv4
wget http://dev.gateworks.com/venice/images/firmware-venice-imx8mm.bin
sudo ./jtag_usbv4 -p firmware-venice-imx8mm.bin
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
61 lines
1.8 KiB
Makefile
61 lines
1.8 KiB
Makefile
define Build/boot-scr
|
|
rm -f $@-boot.scr
|
|
mkimage -A arm64 -O linux -T script -C none -a 0 -e 0 \
|
|
-d bootscript-$(BOOT_SCRIPT) $@-boot.scr
|
|
endef
|
|
|
|
define Build/boot-img-ext4
|
|
rm -fR $@.boot
|
|
mkdir -p $@.boot
|
|
$(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
|
|
$(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
|
|
-$(CP) $@-boot.scr $@.boot/boot.scr
|
|
make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M \
|
|
$(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
|
|
$@.bootimg $@.boot
|
|
endef
|
|
|
|
define Build/sdcard-img-ext4
|
|
SIGNATURE="$(IMG_PART_SIGNATURE)" \
|
|
PARTOFFSET="$(PARTITION_OFFSET)" PADDING=1 \
|
|
$(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
|
|
$@ \
|
|
$(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
|
|
$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
|
|
256
|
|
endef
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
FILESYSTEMS := squashfs ubifs ext4
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/freescale
|
|
KERNEL_INSTALL := 1
|
|
KERNEL_NAME := Image
|
|
KERNEL := kernel-bin
|
|
endef
|
|
|
|
define Device/imx8m
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := i.MX8M
|
|
DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*.dts)))
|
|
endef
|
|
TARGET_DEVICES += imx8m
|
|
|
|
define Device/gateworks_venice
|
|
$(call Device/Default)
|
|
FILESYSTEMS := squashfs ext4
|
|
DEVICE_VENDOR := Gateworks
|
|
DEVICE_MODEL := i.MX8M Venice
|
|
BOOT_SCRIPT := gateworks_venice
|
|
PARTITION_OFFSET := 16M
|
|
DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*-venice*.dts)))
|
|
DEVICE_PACKAGES := \
|
|
kmod-hwmon-gsc kmod-rtc-ds1672 kmod-eeprom-at24 \
|
|
kmod-gpio-button-hotplug kmod-leds-gpio kmod-pps-gpio \
|
|
kmod-lan743x kmod-sky2 kmod-iio-st_accel-i2c \
|
|
kmod-can kmod-can-flexcan kmod-can-mcp251x
|
|
IMAGES := img.gz
|
|
IMAGE/img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
|
|
endef
|
|
TARGET_DEVICES += gateworks_venice
|