mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
2e715fb4fc
Add support for BCM2712 (Raspberry Pi 5).
3bb5880ab3
Patches were generated from the diff between linux kernel branch linux-6.1.y
and rpi-6.1.y from raspberry pi kernel source:
- git format-patch linux-6.1.y...rpi-6.1.y
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2710/RPi3B, bcm2711/RPi4B
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[Remove applied and reverted patches, squash patches and config commits]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
154 lines
4.3 KiB
Diff
154 lines
4.3 KiB
Diff
From 33b514cb16dbf13395a0becf7442d19676ae4224 Mon Sep 17 00:00:00 2001
|
|
From: Jonathan Bell <jonathan@raspberrypi.com>
|
|
Date: Fri, 15 Sep 2023 17:33:03 +0100
|
|
Subject: [PATCH] drivers: rtc-rpi: add battery charge circuit control and
|
|
readback
|
|
|
|
Parse devicetree for a charger voltage and apply it. If nonzero and a
|
|
valid voltage, the firmware will enable charging, otherwise the charger
|
|
circuit is disabled.
|
|
|
|
Add sysfs attributes to read back the supported charge voltage range,
|
|
the measured battery voltage, and the charger setpoint.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
---
|
|
drivers/rtc/rtc-rpi.c | 106 ++++++++++++++++++++++++++++++++++++++++--
|
|
1 file changed, 103 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/rtc/rtc-rpi.c
|
|
+++ b/drivers/rtc/rtc-rpi.c
|
|
@@ -19,11 +19,22 @@
|
|
struct rpi_rtc_data {
|
|
struct rtc_device *rtc;
|
|
struct rpi_firmware *fw;
|
|
+ u32 bbat_vchg_microvolts;
|
|
};
|
|
|
|
#define RPI_FIRMWARE_GET_RTC_REG 0x00030087
|
|
#define RPI_FIRMWARE_SET_RTC_REG 0x00038087
|
|
-enum {RTC_TIME, RTC_ALARM, RTC_ALARM_PENDING, RTC_ALARM_ENABLE};
|
|
+
|
|
+enum {
|
|
+ RTC_TIME,
|
|
+ RTC_ALARM,
|
|
+ RTC_ALARM_PENDING,
|
|
+ RTC_ALARM_ENABLE,
|
|
+ RTC_BBAT_CHG_VOLTS,
|
|
+ RTC_BBAT_CHG_VOLTS_MIN,
|
|
+ RTC_BBAT_CHG_VOLTS_MAX,
|
|
+ RTC_BBAT_VOLTS
|
|
+};
|
|
|
|
static int rpi_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
@@ -114,6 +125,83 @@ static const struct rtc_class_ops rpi_rt
|
|
.alarm_irq_enable = rpi_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
+static int rpi_rtc_set_charge_voltage(struct device *dev)
|
|
+{
|
|
+ struct rpi_rtc_data *vrtc = dev_get_drvdata(dev);
|
|
+ u32 data[2] = {RTC_BBAT_CHG_VOLTS, vrtc->bbat_vchg_microvolts};
|
|
+ int err;
|
|
+
|
|
+ err = rpi_firmware_property(vrtc->fw, RPI_FIRMWARE_SET_RTC_REG,
|
|
+ &data, sizeof(data));
|
|
+
|
|
+ if (err)
|
|
+ dev_err(dev, "failed to set trickle charge voltage to %uuV: %d\n",
|
|
+ vrtc->bbat_vchg_microvolts, err);
|
|
+ else if (vrtc->bbat_vchg_microvolts)
|
|
+ dev_info(dev, "trickle charging enabled at %uuV\n",
|
|
+ vrtc->bbat_vchg_microvolts);
|
|
+
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static ssize_t rpi_rtc_print_uint_reg(struct device *dev, char *buf, u32 reg)
|
|
+{
|
|
+ struct rpi_rtc_data *vrtc = dev_get_drvdata(dev->parent);
|
|
+ u32 data[2] = {reg, 0};
|
|
+ int ret = 0;
|
|
+
|
|
+ ret = rpi_firmware_property(vrtc->fw, RPI_FIRMWARE_GET_RTC_REG,
|
|
+ &data, sizeof(data));
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ return sprintf(buf, "%u\n", data[1]);
|
|
+}
|
|
+
|
|
+static ssize_t charging_voltage_show(struct device *dev,
|
|
+ struct device_attribute *attr,
|
|
+ char *buf)
|
|
+{
|
|
+ return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_CHG_VOLTS);
|
|
+}
|
|
+static DEVICE_ATTR_RO(charging_voltage);
|
|
+
|
|
+static ssize_t charging_voltage_min_show(struct device *dev,
|
|
+ struct device_attribute *attr,
|
|
+ char *buf)
|
|
+{
|
|
+ return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_CHG_VOLTS_MIN);
|
|
+}
|
|
+static DEVICE_ATTR_RO(charging_voltage_min);
|
|
+
|
|
+static ssize_t charging_voltage_max_show(struct device *dev,
|
|
+ struct device_attribute *attr,
|
|
+ char *buf)
|
|
+{
|
|
+ return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_CHG_VOLTS_MAX);
|
|
+}
|
|
+static DEVICE_ATTR_RO(charging_voltage_max);
|
|
+
|
|
+static ssize_t battery_voltage_show(struct device *dev,
|
|
+ struct device_attribute *attr,
|
|
+ char *buf)
|
|
+{
|
|
+ return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_VOLTS);
|
|
+}
|
|
+static DEVICE_ATTR_RO(battery_voltage);
|
|
+
|
|
+static struct attribute *rpi_rtc_attrs[] = {
|
|
+ &dev_attr_charging_voltage.attr,
|
|
+ &dev_attr_charging_voltage_min.attr,
|
|
+ &dev_attr_charging_voltage_max.attr,
|
|
+ &dev_attr_battery_voltage.attr,
|
|
+ NULL
|
|
+};
|
|
+
|
|
+static const struct attribute_group rpi_rtc_sysfs_files = {
|
|
+ .attrs = rpi_rtc_attrs,
|
|
+};
|
|
+
|
|
static int rpi_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct rpi_rtc_data *vrtc;
|
|
@@ -151,10 +239,22 @@ static int rpi_rtc_probe(struct platform
|
|
clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, vrtc->rtc->features);
|
|
|
|
vrtc->rtc->ops = &rpi_rtc_ops;
|
|
- ret = devm_rtc_register_device(vrtc->rtc);
|
|
+ ret = rtc_add_group(vrtc->rtc, &rpi_rtc_sysfs_files);
|
|
+ if (ret)
|
|
+ return ret;
|
|
|
|
rpi_rtc_alarm_clear_pending(dev);
|
|
- return ret;
|
|
+
|
|
+ /*
|
|
+ * Optionally enable trickle charging - if the property isn't
|
|
+ * present (or set to zero), trickle charging is disabled.
|
|
+ */
|
|
+ of_property_read_u32(np, "trickle-charge-microvolt",
|
|
+ &vrtc->bbat_vchg_microvolts);
|
|
+
|
|
+ rpi_rtc_set_charge_voltage(dev);
|
|
+
|
|
+ return devm_rtc_register_device(vrtc->rtc);
|
|
}
|
|
|
|
static const struct of_device_id rpi_rtc_dt_match[] = {
|