openwrt/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch
Olliver Schinagl 943905b0b6 realtek: Fix typo in Kconfig prompt
As the symbol RTL930x shows, the bool enables the RTL930x platform, not
the RTL839x one.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
(slightly changed commit subject)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-08-05 14:10:42 +02:00

82 lines
2.0 KiB
Diff

--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA) += pic32/
platform-$(CONFIG_MACH_PISTACHIO) += pistachio/
platform-$(CONFIG_RALINK) += ralink/
platform-$(CONFIG_MIKROTIK_RB532) += rb532/
+platform-$(CONFIG_RTL83XX) += rtl838x/
platform-$(CONFIG_SGI_IP22) += sgi-ip22/
platform-$(CONFIG_SGI_IP27) += sgi-ip27/
platform-$(CONFIG_SGI_IP28) += sgi-ip22/
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1037,8 +1037,58 @@ config NLM_XLP_BOARD
This board is based on Netlogic XLP Processor.
Say Y here if you have a XLP based board.
+config RTL83XX
+ bool "Realtek based platforms"
+ select DMA_NONCOHERENT
+ select IRQ_MIPS_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_MIPS16
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_EARLY_PRINTK_8250
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select BOOT_RAW
+ select PINCTRL
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
+ select USE_OF
+
endchoice
+config RTL838X
+ bool "Realtek RTL838X based platforms"
+ depends on RTL83XX
+ select CSRC_R4K
+ select CEVT_R4K
+
+config RTL839X
+ bool "Realtek RTL839X based platforms"
+ depends on RTL83XX
+ select CSRC_R4K
+ select CEVT_R4K
+ select SYS_SUPPORTS_MULTITHREADING
+
+config RTL930X
+ bool "Realtek RTL930X based platforms"
+ depends on RTL83XX
+ select MIPS_CPU_SCACHE
+ select CSRC_R4K
+ select CEVT_RTL9300
+ select SYS_SUPPORTS_MULTITHREADING
+
+config RTL931X
+ bool "Realtek RTL931X based platforms"
+ depends on RTL930X
+ select MIPS_GIC
+ select COMMON_CLK
+ select CLKSRC_MIPS_GIC
+ select SYS_SUPPORTS_VPE_LOADER
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_MIPS_CPS
+
source "arch/mips/alchemy/Kconfig"
source "arch/mips/ath25/Kconfig"
source "arch/mips/ath79/Kconfig"
@@ -1097,6 +1147,9 @@ config CEVT_GT641XX
config CEVT_R4K
bool
+config CEVT_RTL9300
+ bool
+
config CEVT_SB1250
bool