ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-21 09:42:09 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
openwrt/target/linux/ath79/dts
History
Guan-Hong Lin 9ebb44aef4 ath79: add support for EnGenius EWS511AP 
EnGenius EWS511AP is a wireless managed wall AP with PoE support,
based on Qualcomm/Atheros QCA9531(Honeybee) + QCA9887.

Short specification:

- 128MB of RAM
- 16 MB of SPI FLASH
- 2T2R 2.4 GHz (QCA9531), 802.11b/g/n
- 1T1R 5 GHz (QCA9887), 802.11ac/n/a
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x Power LED, 2x LAN LEDs, 1x WLAN 2.4G LED, 1x WLAN 5G LED
- 1x RESET button
- built-in watchdog chipset

Flash instruction:

From EnGenius firmware to OpenWrt firmware:

Original firmware is based on QSDK.
Use sysupgrade firmware directly in vendor GUI.
Reset to factory default is necessary.

From OpenWrt firmware to EnGenius firmware:

1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8
   Put the OpenWrt firmware in the root directory on your computer.
2. Power up EWS511AP. Press 4 and then press any key to enter u-boot.
3. Download OpenWrt firmware
   (ath)> tftpboot 0x80060000 ${dir}"openwrt-ath79-generic-engenius_ews511ap-squashfs-sysupgrade.bin"
4. Flash the firmware
   (ath)> erase 0x9f060000 +f50000
   (ath)> cp.b $fileaddr 0x9f060000 $filesize
5. Reboot
   (ath)> reset

Signed-off-by: Guan-Hong Lin <GH.Lin@senao.com>
2018-12-31 16:25:09 +01:00
..
ar724x.dtsi
ath79: add pinmux node to ar724x.dtsi
2018-06-01 08:23:02 +02:00
ar934x.dtsi
ath79: fix dts warnings
2018-08-08 08:11:11 +02:00
ar1022_iodata_wn-ag300dgr.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7100.dtsi
ath79: fix dtc compiler warnings
2018-12-12 12:28:26 +01:00
ar7161_buffalo_wzr-hp-ag300h.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7161_dlink_dir-825-b1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7161_netgear_wndr3700.dts
ath79: specify "firmware" partition format for WNDR3700 and v2
2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3700.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7161_netgear_wndr3700v2.dts
ath79: specify "firmware" partition format for WNDR3700 and v2
2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3800.dts
ath79: specify "firmware" partition format for Netgear WNDR3800
2018-11-24 08:46:59 +01:00
ar7161_ubnt_routerstation-pro.dts
ath79: add syscon compatible property to ar7100 ethernet nodes
2018-09-06 21:35:53 +02:00
ar7161_ubnt_routerstation.dts
ath79: initial support for Ubiquiti RouterStation and RouterStation Pro
2018-08-27 19:31:17 +02:00
ar7161_ubnt_routerstation.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7240_buffalo_whr-g301n.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7240_netgear_wnr612-v2.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240_netgear_wnr612-v2.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7240_on_n150r.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr74xn-v1.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7240_tplink_tl-wr740n-v1.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr740n-v3.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr741-v1.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr743nd-v1.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr841-v5.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr941-v4.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7240.dtsi
ath79: fix dts warnings
2018-08-08 08:11:11 +02:00
ar7241_tplink_tl-mr3x20.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3220-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3420-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-wr841-v7.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-wr842n-v1.dts
ath79: add support for TP-Link TL-WR842N/ND v1 router
2018-12-15 21:35:45 +01:00
ar7241_tplink.dtsi
ath79: Define firmware partition format to all boards where applicable
2018-12-06 13:28:22 +01:00
ar7241_ubnt_airrouter.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7241_ubnt_bullet-m.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7241_ubnt_nano-m.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7241_ubnt_rocket-m.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar7241_ubnt_unifi.dts
ath79: Define firmware partition format to all boards where applicable
2018-12-06 13:28:22 +01:00
ar7241_ubnt_xm_outdoor.dtsi
ath79: split ubnt outdoor device leds into separate dtsi
2018-12-03 07:58:49 +01:00
ar7241_ubnt_xm.dtsi
ath79: Define firmware partition format to all boards where applicable
2018-12-06 13:28:22 +01:00
ar7241.dtsi
ath79: fix dts warnings
2018-08-08 08:11:11 +02:00
ar7242_avm_fritz300e.dts
ath79: add AVM EVA firmware partition compatible
2018-12-06 13:28:22 +01:00
ar7242_buffalo_bhr-4grv.dts
ath79: fix MAC address for Buffalo BHR-4GRV
2018-10-07 10:46:20 +02:00
ar7242_buffalo_wzr-bhr.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g450h.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7242_tplink_tl-wr2543-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar7242.dtsi
ath79: Add switch reset definition in dts
2018-07-30 10:43:35 +02:00
ar9132_tplink_tl-wa901nd-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr941-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr1043nd-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9132.dtsi
ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x
2018-08-28 11:26:53 +02:00
ar9330_glinet_gl-ar150.dts
ath79: fix boardname of GL.iNet GL-AR150
2018-12-31 14:05:26 +01:00
ar9330_pqi_air-pen.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9330.dtsi
ath79: fix dts warnings
2018-08-08 08:11:11 +02:00
ar9331_dptechnics_dpt-module.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9331_dragino_ms14.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9331_embeddedwireless_dorin.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9331_etactica_eg200.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9331_onion_omega.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9331_pisen_wmm003n.dts
ath79: Define firmware partition format to all boards where applicable
2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-mr10u.dts
ath79: rename dts/image using manufacturer_board scheme
2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-mr3020-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-mr3040-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
ath79: Define firmware partition format to all boards where applicable
2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-wr703n.dts
ath79: rename dts/image using manufacturer_board scheme
2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr740nd-v4.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-wr741nd-v4.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-wr741nd-v4.dtsi
ath79: Fix system LED on TP-Link WR740/741 v4
2018-12-31 13:28:31 +01:00
ar9331.dtsi
ath79: add tl-mr3020-v1 support
2018-06-08 12:19:49 +02:00
ar9341_pcs_cr3000.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9341_tplink_tl-wr841-v8.dts
ath79: add support for TP-Link TL-WR841N/ND v8
2018-12-31 13:28:31 +01:00
ar9341_tplink_tl-wr842n-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9341.dtsi
ath79: ar934x: Update dts for current ag71xx driver
2018-07-30 10:43:33 +02:00
ar9342_iodata_etg3-r.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9342_ubnt_bullet-m-xw.dts
ath79: ubnt-bullet-m-xw: Remove eth1 disabled node
2018-12-27 16:02:25 +01:00
ar9342_ubnt_lap-120.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanostation-ac-loco.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanostation-ac.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9342_ubnt_wa.dtsi
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9342_ubnt_xw.dtsi
ath79: ubnt-bullet-m-xw: Move eth0 mtd-mac-address to the common include
2018-12-27 16:02:25 +01:00
ar9344_dlink_dir-8x5.dtsi
ath79: add d-link dir-825-c1 and dir-835-a1
2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-825-c1.dts
ath79: add d-link dir-825-c1 and dir-835-a1
2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-835-a1.dts
ath79: add d-link dir-825-c1 and dir-835-a1
2018-12-17 00:21:34 +01:00
ar9344_ocedo_raccoon.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9344_pcs_cap324.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9344_pcs_cr5000.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9344_tplink_tl-wdr3600.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9344_tplink_tl-wdr4300.dts
ath79: add SoC or family compatible
2018-12-06 13:28:22 +01:00
ar9344_tplink_tl-wdr4300.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9344_wd_mynet-wifi-rangeextender.dts
ath79: add support for WD My Net Wi-Fi Range Extender
2018-09-10 09:07:41 +02:00
ar9344_winchannel_wb2000.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
ar9344.dtsi
ath79: fix dts warnings
2018-08-08 08:11:11 +02:00
ath79.dtsi
ath79: ar934x: Update dts for current ag71xx driver
2018-07-30 10:43:33 +02:00
qca953x_tplink_tl-wr810n.dtsi
ath79: Add support for TP-Link WR810N
2018-12-31 14:18:19 +01:00
qca953x.dtsi
ath79: rename qca9533.dtsi to qca953x.dtsi
2018-12-06 12:17:25 +01:00
qca956x.dtsi
ath79: fix pinmux reg value for QCA956x
2018-12-24 19:18:07 +01:00
qca9531_engenius_ews511ap.dts
ath79: add support for EnGenius EWS511AP
2018-12-31 16:25:09 +01:00
qca9531_glinet_gl-ar300m-nand.dts
ath79: fix boardname of GL.iNet GL-AR300M
2018-12-31 14:24:21 +01:00
qca9531_glinet_gl-ar300m-nor.dts
ath79: fix boardname of GL.iNet GL-AR300M
2018-12-31 14:24:21 +01:00
qca9531_glinet_gl-ar300m.dtsi
ath79: add status LED on GL.iNet AR300M
2018-12-31 14:24:55 +01:00
qca9531_glinet_gl-x750.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9531_tplink_tl-wr810n-v1.dts
ath79: Add support for TP-Link WR810N
2018-12-31 14:18:19 +01:00
qca9533_tplink_tl-wr810n-v2.dts
ath79: Add support for TP-Link WR810N
2018-12-31 14:18:19 +01:00
qca9533_tplink_tl-wr841-v9.dts
ath79: add support for indicating the boot state using multiple leds
2018-08-15 07:42:36 +02:00
qca9533_tplink_tl-wr841-v11.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9533_tplink_tl-wr841.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9557_buffalo_bhr-4grv2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9557_iodata_wn-ac1167dgr.dts
ath79: add support for I-O DATA WN-AC1167DGR
2018-08-16 21:20:57 +02:00
qca9557_iodata_wn-ac1600dgr2.dts
ath79: add support for I-O DATA WN-AC1167DGR
2018-08-16 21:20:57 +02:00
qca9557_iodata_wn-ac-dgr.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9557.dtsi
ath79: fix pinmux reg size for QCA955x
2018-12-24 19:18:07 +01:00
qca9558_devolo_dvl1xxx.dtsi
ath79: add support for devolo WiFi pro 1200e
2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200e.dts
ath79: add support for devolo WiFi pro 1200e
2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1750c.dts
ath79: add support for devolo WiFi pro 1750c
2018-12-27 14:06:38 +01:00
qca9558_ocedo_koala.dts
ath79: fix OCEDO Koala ethernet configuration
2018-12-30 20:08:13 +01:00
qca9558_openmesh_om5p-ac-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9558_tplink_archer-c7-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9558_tplink_archer-c7-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9558_tplink_archer-c7.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wdr4900-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wr1043nd-v2.dts
ath79: rename dts/image using manufacturer_board scheme
2018-08-06 07:31:54 +02:00
qca9558_tplink_tl-wr1043nd-v3.dts
ath79: rename dts/image using manufacturer_board scheme
2018-08-06 07:31:54 +02:00
qca9558_tplink_tl-wr1043nd.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9561_avm_fritz4020.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9561_tplink_archer-c5x.dtsi
ath79: add support for Archer C58/C59 v1
2018-11-26 12:05:45 +01:00
qca9561_tplink_archer-c58-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9561_tplink_archer-c59-v1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9563_dlink_dir-859-a1.dts
ath79: add support for D-Link DIR-859 A1
2018-12-30 20:08:13 +01:00
qca9563_elecom_wrc-300ghbk2-i.dts
ath79: add support for ELECOM WRC-1750GHBK2-I/C
2018-12-31 21:38:53 +09:00
qca9563_elecom_wrc-1750ghbk2-i.dts
ath79: add support for ELECOM WRC-1750GHBK2-I/C
2018-12-31 21:38:53 +09:00
qca9563_elecom_wrc-ghbk2-i.dtsi
ath79: add support for ELECOM WRC-1750GHBK2-I/C
2018-12-31 21:38:53 +09:00
qca9563_glinet_ar750s.dts
ath79: add support for GL.iNet GL-AR750S
2018-12-31 13:28:20 +01:00
qca9563_nec_wg800hp.dts
ath79: add support for NEC Aterm WG800HP
2018-12-24 19:18:07 +01:00
qca9563_phicomm_k2t.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9563_rosinson_wr818.dts
ath79: Define firmware partition format to all boards where applicable
2018-12-06 13:28:22 +01:00
qca9563_tplink_archer-a7-v5.dts
ath79: add support for TP-Link Archer A7
2018-12-17 08:09:13 +01:00
qca9563_tplink_archer-c7-v5.dts
ath79: add support for TP-Link Archer C7 v5
2018-12-27 14:06:38 +01:00
qca9563_tplink_archer-x7-v5.dtsi
ath79: dts: Remove newly added default-state=off property
2018-12-17 14:22:28 +01:00
qca9563_tplink_re450-v2.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9563_tplink_tl-wr1043n.dtsi
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9563_tplink_tl-wr1043nd-v4.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
qca9563_ubnt_unifiac-lite.dts
ath79: add support for Unifi AC Mesh
2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi
ath79: add support for Unifi AC Mesh
2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts
ath79: add support for UniFi AC-Mesh Pro
2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts
ath79: add support for Unifi AC Mesh
2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts
ath79: add support for UniFi AC-Mesh Pro
2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi
ath79: add support for UniFi AC-Mesh Pro
2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi
ath79: Fix UBNT Unifi AC LEDs
2018-12-31 13:28:31 +01:00