mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
b754b0c721
Removed upstreamed: backport-5.10/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch pending-5.10/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
48 lines
2.0 KiB
Diff
48 lines
2.0 KiB
Diff
From 7acd8ef92e8789e10b5d736d73cea3b625087f26 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
|
|
Date: Wed, 8 Dec 2021 06:07:44 +0100
|
|
Subject: [PATCH] PCI: aardvark: Add support for PME interrupts
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does
|
|
nothing. This is because PCIe PME driver expects to receive PCIe interrupt
|
|
defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not
|
|
trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom
|
|
aardvark interrupt which this driver is not processing yet.
|
|
|
|
Fix this issue by handling PME interrupt in advk_pcie_handle_int() and
|
|
chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since
|
|
aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver
|
|
finally starts receiving PME interrupt.
|
|
|
|
Signed-off-by: Pali Rohár <pali@kernel.org>
|
|
Signed-off-by: Marek Behún <kabel@kernel.org>
|
|
---
|
|
drivers/pci/controller/pci-aardvark.c | 13 +++++++++++++
|
|
1 file changed, 13 insertions(+)
|
|
|
|
--- a/drivers/pci/controller/pci-aardvark.c
|
|
+++ b/drivers/pci/controller/pci-aardvark.c
|
|
@@ -1488,6 +1488,19 @@ static void advk_pcie_handle_int(struct
|
|
isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
|
|
isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
|
|
|
|
+ /* Process PME interrupt */
|
|
+ if (isr0_status & PCIE_MSG_PM_PME_MASK) {
|
|
+ /*
|
|
+ * Do not clear PME interrupt bit in ISR0, it is cleared by IRQ
|
|
+ * receiver by writing to the PCI_EXP_RTSTA register of emulated
|
|
+ * root bridge. Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ,
|
|
+ * so use PCIe interrupt 0.
|
|
+ */
|
|
+ virq = irq_find_mapping(pcie->irq_domain, 0);
|
|
+ if (generic_handle_irq(virq) == -EINVAL)
|
|
+ dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n");
|
|
+ }
|
|
+
|
|
/* Process ERR interrupt */
|
|
if (isr0_status & PCIE_ISR0_ERR_MASK) {
|
|
advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG);
|