ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 21:58:04 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
9e86e0b33b
openwrt/target/linux/bcm27xx/patches-6.1/950-0865-usb-dwc3-Set-DMA-and-coherent-masks-early.patch
John Audia 5fe80218f9
kernel: bump 6.1 to 6.1.78 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.78

Manually rebased:
	bcm27xx/patches-6.1/950-0865-usb-dwc3-Set-DMA-and-coherent-masks-early.patch
	bcm27xx/patches-6.1/950-0124-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch

All other patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-02-18 11:20:27 +00:00

385 lines
12 KiB
Diff
Raw Blame History

From 4ffa5f2c5fc7854683964bb2f2bf23907c18213f Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.com>
Date: Mon, 13 Sep 2021 11:14:32 +0100
Subject: [PATCH] usb: dwc3: Set DMA and coherent masks early
dwc3 allocates scratch and event buffers in the top-level driver. Hack the
probe function to set the DMA mask before trying to allocate these.
I think the event buffers are only used in device mode, but the scratch
buffers may be used if core hibernation is enabled.
usb: dwc3: add support for new DT quirks
Apply the optional axi-pipe-limit and dis-in-autoretry-quirk properties
during driver probe.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
phy: phy-brcm-usb: Add 2712 support
usb: dwc3: if the host controller instance number is present in DT, use it
If two instances of a dwc3 host controller are specified in devicetree,
then the probe order may be arbitrary which results in the device names
swapping on a per-boot basis.
If a "usb" alias with the instance number is specified, then use
that to construct the device name instead of autogenerating one.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
rp1 dwc3 changes
drivers: usb: dwc3: allow setting GTXTHRCFG on dwc_usb3.0 hardware
Equivalent register fields exist in the SuperSpeed Host version of the
hardware, so allow the use of TX thresholds if specified in devicetree.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
drivers: usb: dwc3: remove downstream quirk dis-in-autoretry
Upstream have unilaterally disabled the feature.
Partially reverts 6e9142a26ee0fdc3a5adc49ed6cedc0b16ec2ed1 (downstream)
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
---
drivers/phy/broadcom/Kconfig | 2 +-
.../phy/broadcom/phy-brcm-usb-init-synopsys.c | 59 +++++++++++++++++++
drivers/phy/broadcom/phy-brcm-usb-init.h | 2 +
drivers/phy/broadcom/phy-brcm-usb.c | 18 +++++-
drivers/usb/dwc3/core.c | 52 ++++++++++++++++
drivers/usb/dwc3/core.h | 10 ++++
drivers/usb/dwc3/host.c | 17 ++++--
7 files changed, 153 insertions(+), 7 deletions(-)
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,7 +93,7 @@ config PHY_BRCM_SATA
config PHY_BRCM_USB
tristate "Broadcom STB USB PHY driver"
- depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
+ depends on ARCH_BCMBCA || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
depends on OF
select GENERIC_PHY
select SOC_BRCMSTB if ARCH_BRCMSTB
--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
@@ -318,6 +318,36 @@ static void usb_init_common_7216(struct
usb_init_common(params);
}
+static void usb_init_common_2712(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+ void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC];
+ u32 reg;
+
+ if (params->syscon_piarbctl)
+ syscon_piarbctl_init(params->syscon_piarbctl);
+
+ USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
+
+ usb_wake_enable_7211b0(params, false);
+
+ usb_init_common(params);
+
+ /*
+ * The BDC controller will get occasional failures with
+ * the default "Read Transaction Size" of 6 (1024 bytes).
+ * Set it to 4 (256 bytes).
+ */
+ if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) {
+ reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
+ reg &= ~BDC_EC_AXIRDA_RTS_MASK;
+ reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
+ brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA);
+ }
+
+ usb2_eye_fix_7211b0(params);
+}
+
static void usb_init_xhci(struct brcm_usb_init_params *params)
{
pr_debug("%s\n", __func__);
@@ -363,6 +393,18 @@ static void usb_uninit_common_7211b0(str
}
+static void usb_uninit_common_2712(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+ if (params->wake_enabled) {
+ USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
+ usb_wake_enable_7211b0(params, true);
+ } else {
+ USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
+ }
+}
+
static void usb_uninit_xhci(struct brcm_usb_init_params *params)
{
@@ -417,6 +459,16 @@ static const struct brcm_usb_init_ops bc
.set_dual_select = usb_set_dual_select,
};
+static const struct brcm_usb_init_ops bcm2712_ops = {
+ .init_ipp = usb_init_ipp,
+ .init_common = usb_init_common_2712,
+ .init_xhci = usb_init_xhci,
+ .uninit_common = usb_uninit_common_2712,
+ .uninit_xhci = usb_uninit_xhci,
+ .get_dual_select = usb_get_dual_select,
+ .set_dual_select = usb_set_dual_select,
+};
+
void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
{
@@ -434,3 +486,10 @@ void brcm_usb_dvr_init_7211b0(struct brc
params->family_name = "7211";
params->ops = &bcm7211b0_ops;
}
+
+void brcm_usb_dvr_init_2712(struct brcm_usb_init_params *params)
+{
+ params->family_name = "2712";
+ params->ops = &bcm2712_ops;
+ params->suspend_with_clocks = true;
+}
--- a/drivers/phy/broadcom/phy-brcm-usb-init.h
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -61,12 +61,14 @@ struct brcm_usb_init_params {
const struct brcm_usb_init_ops *ops;
struct regmap *syscon_piarbctl;
bool wake_enabled;
+ bool suspend_with_clocks;
};
void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params);
+void brcm_usb_dvr_init_2712(struct brcm_usb_init_params *params);
static inline u32 brcm_usb_readl(void __iomem *addr)
{
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -76,7 +76,7 @@ struct brcm_usb_phy_data {
};
static s8 *node_reg_names[BRCM_REGS_MAX] = {
- "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
+ "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
};
static int brcm_pm_notifier(struct notifier_block *notifier,
@@ -315,6 +315,18 @@ static const struct match_chip_info chip
.optional_reg = BRCM_REGS_BDC_EC,
};
+static const struct match_chip_info chip_info_2712 = {
+ .init_func = &brcm_usb_dvr_init_2712,
+ .required_regs = {
+ BRCM_REGS_CTRL,
+ BRCM_REGS_XHCI_EC,
+ BRCM_REGS_XHCI_GBL,
+ BRCM_REGS_USB_MDIO,
+ -1,
+ },
+ .optional_reg = BRCM_REGS_BDC_EC,
+};
+
static const struct match_chip_info chip_info_7445 = {
.init_func = &brcm_usb_dvr_init_7445,
.required_regs = {
@@ -338,6 +350,10 @@ static const struct of_device_id brcm_us
.data = &chip_info_7211b0,
},
{
+ .compatible = "brcm,bcm2712-usb-phy",
+ .data = &chip_info_2712,
+ },
+ {
.compatible = "brcm,brcmstb-usb-phy",
.data = &chip_info_7445,
},
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1179,6 +1179,24 @@ static void dwc3_config_threshold(struct
}
}
+static void dwc3_set_axi_pipe_limit(struct dwc3 *dwc)
+{
+ struct device *dev = dwc->dev;
+ u32 cfg;
+
+ if (!dwc->axi_pipe_limit)
+ return;
+ if (dwc->axi_pipe_limit > 16) {
+ dev_err(dev, "Invalid axi_pipe_limit property\n");
+ return;
+ }
+ cfg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1);
+ cfg &= ~DWC3_GSBUSCFG1_PIPETRANSLIMIT(15);
+ cfg |= DWC3_GSBUSCFG1_PIPETRANSLIMIT(dwc->axi_pipe_limit - 1);
+
+ dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, cfg);
+}
+
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
@@ -1271,6 +1289,8 @@ static int dwc3_core_init(struct dwc3 *d
dwc3_set_incr_burst_type(dwc);
+ dwc3_set_axi_pipe_limit(dwc);
+
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
@@ -1504,6 +1524,7 @@ static void dwc3_get_properties(struct d
u8 tx_thr_num_pkt_prd = 0;
u8 tx_max_burst_prd = 0;
u8 tx_fifo_resize_max_num;
+ u8 axi_pipe_limit;
const char *usb_psy_name;
int ret;
@@ -1526,6 +1547,9 @@ static void dwc3_get_properties(struct d
*/
tx_fifo_resize_max_num = 6;
+ /* Default to 0 (don't override hardware defaults) */
+ axi_pipe_limit = 0;
+
dwc->maximum_speed = usb_get_maximum_speed(dev);
dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
dwc->dr_mode = usb_get_dr_mode(dev);
@@ -1641,6 +1665,9 @@ static void dwc3_get_properties(struct d
dwc->dis_split_quirk = device_property_read_bool(dev,
"snps,dis-split-quirk");
+ device_property_read_u8(dev, "snps,axi-pipe-limit",
+ &axi_pipe_limit);
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1658,6 +1685,8 @@ static void dwc3_get_properties(struct d
dwc->tx_thr_num_pkt_prd = tx_thr_num_pkt_prd;
dwc->tx_max_burst_prd = tx_max_burst_prd;
+ dwc->axi_pipe_limit = axi_pipe_limit;
+
dwc->imod_interval = 0;
dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;
@@ -1866,6 +1895,12 @@ static int dwc3_probe(struct platform_de
dwc3_get_properties(dwc);
+ if (!dwc->sysdev_is_parent) {
+ ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
+ if (ret)
+ return ret;
+ }
+
dwc->reset = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(dwc->reset)) {
ret = PTR_ERR(dwc->reset);
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -183,6 +183,9 @@
#define DWC3_GSBUSCFG0_INCRBRSTENA (1 << 0) /* undefined length enable */
#define DWC3_GSBUSCFG0_INCRBRST_MASK 0xff
+/* Global SoC Bus Configuration Register 1 */
+#define DWC3_GSBUSCFG1_PIPETRANSLIMIT(n) (((n) & 0xf) << 8)
+
/* Global Debug LSP MUX Select */
#define DWC3_GDBGLSPMUX_ENDBC BIT(15) /* Host only */
#define DWC3_GDBGLSPMUX_HOSTSELECT(n) ((n) & 0x3fff)
@@ -1056,6 +1059,7 @@ struct dwc3_scratchpad_array {
* @tx_max_burst_prd: max periodic ESS transmit burst size
* @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
* @clear_stall_protocol: endpoint number that requires a delayed status phase
+ * @axi_max_pipe: set to override the maximum number of pipelined AXI transfers
* @hsphy_interface: "utmi" or "ulpi"
* @connected: true when we're connected to a host, false otherwise
* @softconnect: true when gadget connect is called, false when disconnect runs
@@ -1287,6 +1291,7 @@ struct dwc3 {
u8 tx_max_burst_prd;
u8 tx_fifo_resize_max_num;
u8 clear_stall_protocol;
+ u8 axi_pipe_limit;
const char *hsphy_interface;
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -30,10 +30,10 @@ static void dwc3_host_fill_xhci_irq_res(
static int dwc3_host_get_irq(struct dwc3 *dwc)
{
- struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+ struct platform_device *pdev = to_platform_device(dwc->dev);
int irq;
- irq = platform_get_irq_byname_optional(dwc3_pdev, "host");
+ irq = platform_get_irq_byname_optional(pdev, "host");
if (irq > 0) {
dwc3_host_fill_xhci_irq_res(dwc, irq, "host");
goto out;
@@ -42,7 +42,7 @@ static int dwc3_host_get_irq(struct dwc3
if (irq == -EPROBE_DEFER)
goto out;
- irq = platform_get_irq_byname_optional(dwc3_pdev, "dwc_usb3");
+ irq = platform_get_irq_byname_optional(pdev, "dwc_usb3");
if (irq > 0) {
dwc3_host_fill_xhci_irq_res(dwc, irq, "dwc_usb3");
goto out;
@@ -51,7 +51,7 @@ static int dwc3_host_get_irq(struct dwc3
if (irq == -EPROBE_DEFER)
goto out;
- irq = platform_get_irq(dwc3_pdev, 0);
+ irq = platform_get_irq(pdev, 0);
if (irq > 0) {
dwc3_host_fill_xhci_irq_res(dwc, irq, NULL);
goto out;
@@ -66,16 +66,23 @@ out:
int dwc3_host_init(struct dwc3 *dwc)
{
+ struct platform_device *pdev = to_platform_device(dwc->dev);
struct property_entry props[5];
struct platform_device *xhci;
int ret, irq;
int prop_idx = 0;
+ int id;
irq = dwc3_host_get_irq(dwc);
if (irq < 0)
return irq;
- xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+ id = of_alias_get_id(pdev->dev.of_node, "usb");
+ if (id >= 0)
+ xhci = platform_device_alloc("xhci-hcd", id);
+ else
+ xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+
if (!xhci) {
dev_err(dwc->dev, "couldn't allocate xHCI device\n");
return -ENOMEM;
Reference in New Issue View Git Blame Copy Permalink