mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
2e715fb4fc
Add support for BCM2712 (Raspberry Pi 5).
3bb5880ab3
Patches were generated from the diff between linux kernel branch linux-6.1.y
and rpi-6.1.y from raspberry pi kernel source:
- git format-patch linux-6.1.y...rpi-6.1.y
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2710/RPi3B, bcm2711/RPi4B
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[Remove applied and reverted patches, squash patches and config commits]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
103 lines
3.7 KiB
Diff
103 lines
3.7 KiB
Diff
From 3fa2fbb7f6e60b85086e454403c5eab1af63b1aa Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Wed, 14 Jun 2023 13:43:58 +0100
|
|
Subject: [PATCH] dtoverlays: Add i2c bus overrides to edt-ft5406 overlay
|
|
|
|
Adds the option for the touch controller to be connected to any
|
|
of the I2C ports.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 17 +++++++++++++++-
|
|
.../boot/dts/overlays/edt-ft5406-overlay.dts | 20 +++++++++++++++++++
|
|
arch/arm/boot/dts/overlays/edt-ft5406.dtsi | 9 ++++++++-
|
|
3 files changed, 44 insertions(+), 2 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1040,9 +1040,11 @@ Params: dr_mode Dual rol
|
|
|
|
|
|
Name: edt-ft5406
|
|
-Info: Overlay for the EDT FT5406 touchscreen on the CSI/DSI I2C interface.
|
|
+Info: Overlay for the EDT FT5406 touchscreen.
|
|
This works with the Raspberry Pi 7" touchscreen when not being polled
|
|
by the firmware.
|
|
+ By default the overlay uses the i2c_csi_dsi I2C interface, but this
|
|
+ can be overridden
|
|
You MUST use either "disable_touchscreen=1" or "ignore_lcd=1" in
|
|
config.txt to stop the firmware polling the touchscreen.
|
|
Load: dtoverlay=edt-ft5406,<param>=<val>
|
|
@@ -1051,6 +1053,19 @@ Params: sizex Touchscr
|
|
invx Touchscreen inverted x axis
|
|
invy Touchscreen inverted y axis
|
|
swapxy Touchscreen swapped x y axis
|
|
+ i2c0 Choose the I2C0 bus on GPIOs 0&1
|
|
+ i2c1 Choose the I2C1 bus on GPIOs 2&3
|
|
+ i2c3 Choose the I2C3 bus (configure with the i2c3
|
|
+ overlay - BCM2711 only)
|
|
+ i2c4 Choose the I2C4 bus (configure with the i2c4
|
|
+ overlay - BCM2711 only)
|
|
+ i2c5 Choose the I2C5 bus (configure with the i2c5
|
|
+ overlay - BCM2711 only)
|
|
+ i2c6 Choose the I2C6 bus (configure with the i2c6
|
|
+ overlay - BCM2711 only)
|
|
+ addr Sets the address for the touch controller. Note
|
|
+ that the device must be configured to use the
|
|
+ specified address.
|
|
|
|
|
|
Name: enc28j60
|
|
--- a/arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts
|
|
@@ -23,4 +23,24 @@
|
|
status = "okay";
|
|
};
|
|
};
|
|
+
|
|
+ __overrides__ {
|
|
+ i2c0 = <&frag13>,"target:0=",<&i2c0>;
|
|
+ i2c1 = <&frag13>, "target?=0",
|
|
+ <&frag13>, "target-path=i2c1",
|
|
+ <0>,"-0-1";
|
|
+ i2c3 = <&frag13>, "target?=0",
|
|
+ <&frag13>, "target-path=i2c3",
|
|
+ <0>,"-0-1";
|
|
+ i2c4 = <&frag13>, "target?=0",
|
|
+ <&frag13>, "target-path=i2c4",
|
|
+ <0>,"-0-1";
|
|
+ i2c5 = <&frag13>, "target?=0",
|
|
+ <&frag13>, "target-path=i2c5",
|
|
+ <0>,"-0-1";
|
|
+ i2c6 = <&frag13>, "target?=0",
|
|
+ <&frag13>, "target-path=i2c6",
|
|
+ <0>,"-0-1";
|
|
+ addr = <&ft5406>,"reg:0";
|
|
+ };
|
|
};
|
|
--- a/arch/arm/boot/dts/overlays/edt-ft5406.dtsi
|
|
+++ b/arch/arm/boot/dts/overlays/edt-ft5406.dtsi
|
|
@@ -23,7 +23,7 @@
|
|
};
|
|
|
|
fragment@12 {
|
|
- target = <&i2c_csi_dsi>;
|
|
+ target = <&i2cbus>;
|
|
__overlay__ {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
@@ -37,6 +37,13 @@
|
|
};
|
|
};
|
|
|
|
+ frag13: fragment@13 {
|
|
+ target = <&i2c_csi_dsi>;
|
|
+ i2cbus: __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
__overrides__ {
|
|
sizex = <&ft5406>,"touchscreen-size-x:0";
|
|
sizey = <&ft5406>,"touchscreen-size-y:0";
|