mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
2baded9ecc
Not all targets create /var/lock or touch /var/lock/fw_printenv.lock in their platform.sh. This is problematic as fw_printenv then fails in case /var/lock/fw_printenv.lock has not been created by previous calls to fw_printenv/fw_setenv before sysupgrade is run. Targets using fw_printenv/fw_setenv during sysupgrade: * ath79/* * ipq40xx/* * ipq806x/* * kirkwood/* * layerscape/* * mediatek/mt7622 * mvebu/* * ramips/* * realtek/* Targets currently using additional steps in /lib/upgrade/platform.sh to make sure /var/lock/fw_printenv.lock (or at least /var/lock) actually exists: * ath79/* (openmesh devices) * ipq40xx/* (linksys devices) * ipq806x/* (linksys devices) * kirkwood/* (linksys devices) * layerscape/* * mvebu/cortexa9 (linksys devices) Given that accessing the U-Boot environment during sysupgrade is not uncommon and the situation across targets is currently quite diverse, just make sure both tools as well fw_env.config are always copied to the ramdisk used for sysupgrade. Also make sure /var/lock always exists. This now allows to remove copying of fw_printenv/fw_setenv as well as fw_env.config, creation of /var/lock or even /var/lock/fw_printenv.lock from lib/upgrade/platform.sh or files included there. As the same applies also to 'fwtool' which is used by generic eMMC sysupgrade, also always copy that to ramdisk. Signed-off-by: Daniel Golle <daniel@makrotopia.org> |
||
|---|---|---|
| .. | ||
| base-files | ||
| boot | ||
| devel | ||
| firmware | ||
| kernel | ||
| libs | ||
| network | ||
| system | ||
| utils | ||
| Makefile | ||