openwrt/target/linux/ramips/mt7621/base-files
Chukun Pan 82032f3509 ramips: add support for JCG Y2
JCG Y2 is an AC1300M router

Hardware specs:
  SoC: MediaTek MT7621AT
  Flash: Winbond W25Q128JVSQ 16MiB
  RAM: Nanya NT5CB128M16 256MiB
  WLAN: 2.4/5 GHz 2T2R (1x MediaTek MT7615)
  Ethernet: 10/100/1000 Mbps x5
  LED: POWER, INTERNET, 2.4G, 5G
  Button: Reset
  Power: DC 12V,1A

Flash instructions:
  Upload factory.bin in stock firmware's upgrade page.

MAC addresses map:
  0x0004  *:c8  wlan2g/wlan5g/label
  0xe000  *:c7  lan
  0xe006  *:c6  wan

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2021-02-09 13:10:33 +01:00
..
etc ramips: add support for JCG Y2 2021-02-09 13:10:33 +01:00
lib ramips: mt7621: use preferred logic in lib/upgrade/iodata.sh 2021-02-07 21:58:51 +01:00
sbin ramips: split base-files into subtargets 2019-11-03 00:26:17 +01:00