mirror of
https://github.com/openwrt/openwrt.git
synced 2025-03-25 21:38:14 +00:00
9dc38e48f7
The .init and .fini sections are built by concatenating code fragments. Putting mips16 code in the middle of a mips32 code block doesn't work. Make gcc built the magic crt stuff in no-mips16 mode. This is specific to 4.6-linaro but is probably portable to other gcc flavors. Adding this to the t-libgcc-mips16 makefile fragment is a hack not suitable for pushing upstream, but there is no mips/t-linux or mips/t-uclibc and I am not going to touch gcc/configure for two lines. Signed-off-by: Jay Carlson <nop@nop.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36200
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org