mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
4bb5e331a7
This resolves a hazard between a mtc0 and a mfc0 instruction after activating the DSP support. Without this fix the CPU could use the old value again and the DSP support would not be active. Fixes: FS#2928, FS#2899 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ath79/tl-wdr3600; ath79/tl-wdr4300] Tested-by: David Bauer <mail@david-bauer.net> [ocedo_koala/ocedo_raccoon]
62 lines
2.6 KiB
Diff
62 lines
2.6 KiB
Diff
From db4603e30effd74d4adb6bcdf73072b2c06fafcd Mon Sep 17 00:00:00 2001
|
|
From: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Date: Fri, 3 Jul 2020 00:07:15 +0200
|
|
Subject: [PATCH] MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
|
|
|
|
This resolves the hazard between the mtc0 in the change_c0_status() and
|
|
the mfc0 in configure_exception_vector(). Without resolving this hazard
|
|
configure_exception_vector() could read an old value and would restore
|
|
this old value again. This would revert the changes change_c0_status()
|
|
did. I checked this by printing out the read_c0_status() at the end of
|
|
per_cpu_trap_init() and the ST0_MX is not set without this patch.
|
|
|
|
The hazard is documented in the MIPS Architecture Reference Manual Vol.
|
|
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
|
|
6.03 table 8.1 which includes:
|
|
|
|
Producer | Consumer | Hazard
|
|
----------|----------|----------------------------
|
|
mtc0 | mfc0 | any coprocessor 0 register
|
|
|
|
I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
|
|
There the change_c0_status() function would activate the DSPen by
|
|
setting ST0_MX in the c0_status register. This was reverted and then the
|
|
system got a DSP exception when the DSP registers were saved in
|
|
save_dsp() in the first process switch. The crash looks like this:
|
|
|
|
[ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
|
|
[ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
|
|
[ 0.107070] Kernel panic - not syncing: Unexpected DSP exception
|
|
[ 0.113470] Rebooting in 1 seconds..
|
|
|
|
We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
|
|
not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
|
|
kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
|
|
did not happen.
|
|
|
|
In the kernel I bisected this problem to commit 9012d011660e ("compiler:
|
|
allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
|
|
reverted it also happened after commit 172dcd935c34b ("MIPS: Always
|
|
allocate exception vector for MIPSr2+").
|
|
|
|
Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
|
|
does similar changes to a different file. I am not sure if there are
|
|
more places affected by this problem.
|
|
|
|
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Cc: <stable@vger.kernel.org>
|
|
---
|
|
arch/mips/kernel/traps.c | 1 +
|
|
1 file changed, 1 insertion(+)
|
|
|
|
--- a/arch/mips/kernel/traps.c
|
|
+++ b/arch/mips/kernel/traps.c
|
|
@@ -2096,6 +2096,7 @@ static void configure_status(void)
|
|
|
|
change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
|
|
status_set);
|
|
+ back_to_back_c0_hazard();
|
|
}
|
|
|
|
unsigned int hwrena;
|