mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
368 lines
7.0 KiB
Diff
368 lines
7.0 KiB
Diff
From 9542646d9211ab4305beb75da97f61cc1968ae6c Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Tue, 28 May 2019 16:36:04 +0100
|
|
Subject: [PATCH 507/806] BCM270X_DT: Rename Pi Zero W DT files
|
|
|
|
The downtream Pi Zero W dts file uses the digit 0, whereas upstream
|
|
chose to spell it out - "zero-w". The firmware has, for a long time,
|
|
looked for bcm2708-rpi-zero-w.dtb first before falling back to the
|
|
numerical version. Therefore it is better to follow upstream and
|
|
make the switch to "bcm2708-rpi-zero-w".
|
|
|
|
At the same time, remove some overrides that duplicate values
|
|
inherited from the shared .dtsi files.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 2 +-
|
|
.../boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} | 5 -----
|
|
2 files changed, 1 insertion(+), 6 deletions(-)
|
|
rename arch/arm/boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} (97%)
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -4,7 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
|
|
bcm2708-rpi-b.dtb \
|
|
bcm2708-rpi-b-plus.dtb \
|
|
bcm2708-rpi-cm.dtb \
|
|
- bcm2708-rpi-0-w.dtb \
|
|
+ bcm2708-rpi-zero-w.dtb \
|
|
bcm2709-rpi-2-b.dtb \
|
|
bcm2710-rpi-3-b.dtb \
|
|
bcm2710-rpi-3-b-plus.dtb \
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
|
|
+++ /dev/null
|
|
@@ -1,167 +0,0 @@
|
|
-/dts-v1/;
|
|
-
|
|
-#include "bcm2708.dtsi"
|
|
-#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
-
|
|
-/ {
|
|
- compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
- model = "Raspberry Pi Zero W";
|
|
-
|
|
- chosen {
|
|
- bootargs = "coherent_pool=1M 8250.nr_uarts=1";
|
|
- };
|
|
-
|
|
- aliases {
|
|
- serial0 = &uart1;
|
|
- serial1 = &uart0;
|
|
- mmc1 = &mmcnr;
|
|
- };
|
|
-};
|
|
-
|
|
-&gpio {
|
|
- spi0_pins: spi0_pins {
|
|
- brcm,pins = <9 10 11>;
|
|
- brcm,function = <4>; /* alt0 */
|
|
- };
|
|
-
|
|
- spi0_cs_pins: spi0_cs_pins {
|
|
- brcm,pins = <8 7>;
|
|
- brcm,function = <1>; /* output */
|
|
- };
|
|
-
|
|
- i2c0_pins: i2c0 {
|
|
- brcm,pins = <0 1>;
|
|
- brcm,function = <4>;
|
|
- };
|
|
-
|
|
- i2c1_pins: i2c1 {
|
|
- brcm,pins = <2 3>;
|
|
- brcm,function = <4>;
|
|
- };
|
|
-
|
|
- i2s_pins: i2s {
|
|
- brcm,pins = <18 19 20 21>;
|
|
- brcm,function = <4>; /* alt0 */
|
|
- };
|
|
-
|
|
- sdio_pins: sdio_pins {
|
|
- brcm,pins = <34 35 36 37 38 39>;
|
|
- brcm,function = <7>; /* ALT3 = SD1 */
|
|
- brcm,pull = <0 2 2 2 2 2>;
|
|
- };
|
|
-
|
|
- bt_pins: bt_pins {
|
|
- brcm,pins = <43>;
|
|
- brcm,function = <4>; /* alt0:GPCLK2 */
|
|
- brcm,pull = <0>; /* none */
|
|
- };
|
|
-
|
|
- uart0_pins: uart0_pins {
|
|
- brcm,pins = <30 31 32 33>;
|
|
- brcm,function = <7>; /* alt3=UART0 */
|
|
- brcm,pull = <2 0 0 2>; /* up none none up */
|
|
- };
|
|
-
|
|
- uart1_pins: uart1_pins {
|
|
- brcm,pins;
|
|
- brcm,function;
|
|
- brcm,pull;
|
|
- };
|
|
-
|
|
- audio_pins: audio_pins {
|
|
- brcm,pins = <>;
|
|
- brcm,function = <>;
|
|
- };
|
|
-};
|
|
-
|
|
-&mmcnr {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&sdio_pins>;
|
|
- bus-width = <4>;
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&uart0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&uart0_pins &bt_pins>;
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&uart1 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&uart1_pins>;
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&spi0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
|
- cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
-
|
|
- spidev0: spidev@0{
|
|
- compatible = "spidev";
|
|
- reg = <0>; /* CE0 */
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- spi-max-frequency = <125000000>;
|
|
- };
|
|
-
|
|
- spidev1: spidev@1{
|
|
- compatible = "spidev";
|
|
- reg = <1>; /* CE1 */
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- spi-max-frequency = <125000000>;
|
|
- };
|
|
-};
|
|
-
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
- clock-frequency = <100000>;
|
|
-};
|
|
-
|
|
-&i2c1 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c1_pins>;
|
|
- clock-frequency = <100000>;
|
|
-};
|
|
-
|
|
-&i2c2 {
|
|
- clock-frequency = <100000>;
|
|
-};
|
|
-
|
|
-&i2s {
|
|
- #sound-dai-cells = <0>;
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2s_pins>;
|
|
-};
|
|
-
|
|
-&random {
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&leds {
|
|
- act_led: act {
|
|
- label = "led0";
|
|
- linux,default-trigger = "mmc0";
|
|
- gpios = <&gpio 47 0>;
|
|
- };
|
|
-};
|
|
-
|
|
-&hdmi {
|
|
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
-};
|
|
-
|
|
-&audio {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&audio_pins>;
|
|
-};
|
|
-
|
|
-/ {
|
|
- __overrides__ {
|
|
- act_led_gpio = <&act_led>,"gpios:4";
|
|
- act_led_activelow = <&act_led>,"gpios:8";
|
|
- act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
- };
|
|
-};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
@@ -0,0 +1,162 @@
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm2708.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
+ model = "Raspberry Pi Zero W";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1";
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart1;
|
|
+ serial1 = &uart0;
|
|
+ mmc1 = &mmcnr;
|
|
+ };
|
|
+};
|
|
+
|
|
+&gpio {
|
|
+ spi0_pins: spi0_pins {
|
|
+ brcm,pins = <9 10 11>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ spi0_cs_pins: spi0_cs_pins {
|
|
+ brcm,pins = <8 7>;
|
|
+ brcm,function = <1>; /* output */
|
|
+ };
|
|
+
|
|
+ i2c0_pins: i2c0 {
|
|
+ brcm,pins = <0 1>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2c1_pins: i2c1 {
|
|
+ brcm,pins = <2 3>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2s_pins: i2s {
|
|
+ brcm,pins = <18 19 20 21>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ sdio_pins: sdio_pins {
|
|
+ brcm,pins = <34 35 36 37 38 39>;
|
|
+ brcm,function = <7>; /* ALT3 = SD1 */
|
|
+ brcm,pull = <0 2 2 2 2 2>;
|
|
+ };
|
|
+
|
|
+ bt_pins: bt_pins {
|
|
+ brcm,pins = <43>;
|
|
+ brcm,function = <4>; /* alt0:GPCLK2 */
|
|
+ brcm,pull = <0>; /* none */
|
|
+ };
|
|
+
|
|
+ uart0_pins: uart0_pins {
|
|
+ brcm,pins = <30 31 32 33>;
|
|
+ brcm,function = <7>; /* alt3=UART0 */
|
|
+ brcm,pull = <2 0 0 2>; /* up none none up */
|
|
+ };
|
|
+
|
|
+ uart1_pins: uart1_pins {
|
|
+ brcm,pins;
|
|
+ brcm,function;
|
|
+ brcm,pull;
|
|
+ };
|
|
+
|
|
+ audio_pins: audio_pins {
|
|
+ brcm,pins = <>;
|
|
+ brcm,function = <>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mmcnr {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdio_pins>;
|
|
+ bus-width = <4>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_pins &bt_pins>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart1_pins>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&spi0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
|
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
+
|
|
+ spidev0: spidev@0{
|
|
+ compatible = "spidev";
|
|
+ reg = <0>; /* CE0 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+
|
|
+ spidev1: spidev@1{
|
|
+ compatible = "spidev";
|
|
+ reg = <1>; /* CE1 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c1_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2s {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2s_pins>;
|
|
+};
|
|
+
|
|
+&leds {
|
|
+ act_led: act {
|
|
+ label = "led0";
|
|
+ linux,default-trigger = "mmc0";
|
|
+ gpios = <&gpio 47 0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&hdmi {
|
|
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
+};
|
|
+
|
|
+&audio {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&audio_pins>;
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ act_led_gpio = <&act_led>,"gpios:4";
|
|
+ act_led_activelow = <&act_led>,"gpios:8";
|
|
+ act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
+ };
|
|
+};
|